Wi-Fi management extension
The Wi-Fi management extension library adds an automatic connection feature to the Wi-Fi stack.
Overview
The automatic connection feature is implemented by adding a NET_REQUEST_WIFI_CONNECT_STORED
command to Zephyr’s Wi-Fi L2 Layer.
Credentials are pulled from the Wi-Fi credentials library.
Configuration
To use this library, enable the CONFIG_WIFI_MGMT_EXT
Kconfig option.
For development purposes, you can set static Wi-Fi credentials configuration using the following Kconfig options:
CONFIG_WIFI_CREDENTIALS_STATIC
- This option enables static Wi-Fi configuration.CONFIG_WIFI_CREDENTIALS_STATIC_SSID
- Wi-Fi SSID.CONFIG_WIFI_CREDENTIALS_STATIC_PASSWORD
- Wi-Fi password.CONFIG_WIFI_CREDENTIALS_STATIC_TYPE_OPEN
- Wi-Fi network uses no password.CONFIG_WIFI_CREDENTIALS_STATIC_TYPE_PSK
- Wi-Fi network uses a password and PSK security (default).CONFIG_WIFI_CREDENTIALS_STATIC_TYPE_PSK_SHA256
- Wi-Fi network uses a password and PSK-256 security.CONFIG_WIFI_CREDENTIALS_STATIC_TYPE_SAE
- Wi-Fi network uses a password and SAE security.
Usage
The following code snippet shows how to use the Network Management command:
int ret;
struct net_if *iface = net_if_get_default();
int rc = net_mgmt(NET_REQUEST_WIFI_CONNECT_STORED, iface, NULL, 0);
if (rc) {
printk("an error occurred when trying to auto-connect to a network. err: %d", rc);
}
Limitations
The library has the following limitations:
It can only be used with Nordic’s
hostap
-based Wi-Fi stack. The Wi-Fi configuration is highly vendor-specific.The commands
NET_REQUEST_WIFI_CONNECT
andNET_REQUEST_WIFI_CONNECT_STORED
clear the list of configured Wi-Fi networks in RAM. Automatic connection has to be requested again after directly requesting connection to a specific network.
API documentation
include/net/wifi_mgmt_ext.h
subsys/net/lib/wifi_mgmt_ext
- group wifi_mgmt_ext
Library that adds an automatic connection feature to the Wi-Fi stack.
Defines
-
NET_REQUEST_WIFI_CONNECT_STORED
-
NET_REQUEST_WIFI_CONNECT_STORED