Network Buffer

Overview
Creating buffers
Common Operations
Reference Counting
API Reference

Overview 

Network buffers are a core concept of how the networking stack (as well as the Bluetooth stack) pass data around. The API for them is defined in include/zephyr/net/buf.h:.

Creating buffers 

Network buffers are created by first defining a pool of them:

NET_BUF_POOL_DEFINE(pool_name, buf_count, buf_size, user_data_size, NULL);

The pool is a static variable, so if it’s needed to be exported to another module a separate pointer is needed.

Once the pool has been defined, buffers can be allocated from it with:

buf = net_buf_alloc(&pool_name, timeout);

There is no explicit initialization function for the pool or its buffers, rather this is done implicitly as net_buf_alloc() gets called.

If there is a need to reserve space in the buffer for protocol headers to be prepended later, it’s possible to reserve this headroom with:

net_buf_reserve(buf, headroom);

In addition to actual protocol data and generic parsing context, network buffers may also contain protocol-specific context, known as user data. Both the maximum data and user data capacity of the buffers is compile-time defined when declaring the buffer pool.

The buffers have native support for being passed through k_fifo kernel objects. This is a very practical feature when the buffers need to be passed from one thread to another. However, since a net_buf may have a fragment chain attached to it, instead of using the k_fifo_put() and k_fifo_get() APIs, special net_buf_put() and net_buf_get() APIs must be used when passing buffers through FIFOs. These APIs ensure that the buffer chains stay intact. The same applies for passing buffers through a singly linked list, in which case the net_buf_slist_put() and net_buf_slist_get() functions must be used instead of sys_slist_append() and sys_slist_get().

Common Operations 

The network buffer API provides some useful helpers for encoding and decoding data in the buffers. To fully understand these helpers it’s good to understand the basic names of operations used with them:

Add

Add data to the end of the buffer. Modifies the data length value while leaving the actual data pointer intact. Requires that there is enough tailroom in the buffer. Some examples of APIs for adding data:

void *net_buf_add(struct net_buf *buf, size_t len);
void *net_buf_add_mem(struct net_buf *buf, const void *mem, size_t len);
uint8_t *net_buf_add_u8(struct net_buf *buf, uint8_t value);
void net_buf_add_le16(struct net_buf *buf, uint16_t value);
void net_buf_add_le32(struct net_buf *buf, uint32_t value);

Remove

Remove data from the end of the buffer. Modifies the data length value while leaving the actual data pointer intact. Some examples of APIs for removing data:

void *net_buf_remove_mem(struct net_buf *buf, size_t len);
uint8_t net_buf_remove_u8(struct net_buf *buf);
uint16_t net_buf_remove_le16(struct net_buf *buf);
uint32_t net_buf_remove_le32(struct net_buf *buf);

Push

Prepend data to the beginning of the buffer. Modifies both the data length value as well as the data pointer. Requires that there is enough headroom in the buffer. Some examples of APIs for pushing data:

void *net_buf_push(struct net_buf *buf, size_t len);
void *net_buf_push_mem(struct net_buf *buf, const void *mem, size_t len);
void net_buf_push_u8(struct net_buf *buf, uint8_t value);
void net_buf_push_le16(struct net_buf *buf, uint16_t value);

Pull

Remove data from the beginning of the buffer. Modifies both the data length value as well as the data pointer. Some examples of APIs for pulling data:

void *net_buf_pull(struct net_buf *buf, size_t len);
void *net_buf_pull_mem(struct net_buf *buf, size_t len);
uint8_t net_buf_pull_u8(struct net_buf *buf);
uint16_t net_buf_pull_le16(struct net_buf *buf);
uint32_t net_buf_pull_le32(struct net_buf *buf);

The Add and Push operations are used when encoding data into the buffer, whereas the Remove and Pull operations are used when decoding data from a buffer.

Reference Counting 

Each network buffer is reference counted. The buffer is initially acquired from a free buffers pool by calling net_buf_alloc(), resulting in a buffer with reference count 1. The reference count can be incremented with net_buf_ref() or decremented with net_buf_unref(). When the count drops to zero the buffer is automatically placed back to the free buffers pool.

API Reference 

group net_buf

Network buffer library.

Defines

NET_BUF_SIMPLE_DEFINE(_name, _size)

Define a net_buf_simple stack variable.

This is a helper macro which is used to define a net_buf_simple object on the stack.

Parameters

_name – Name of the net_buf_simple object.
_size – Maximum data storage for the buffer.

NET_BUF_SIMPLE_DEFINE_STATIC(_name, _size)

Define a static net_buf_simple variable.

This is a helper macro which is used to define a static net_buf_simple object.

Parameters

_name – Name of the net_buf_simple object.
_size – Maximum data storage for the buffer.

NET_BUF_SIMPLE(_size)

Define a net_buf_simple stack variable and get a pointer to it.

This is a helper macro which is used to define a net_buf_simple object on the stack and the get a pointer to it as follows:

struct net_buf_simple *my_buf = NET_BUF_SIMPLE(10);

After creating the object it needs to be initialized by calling net_buf_simple_init().

Parameters

_size – Maximum data storage for the buffer.

Returns

Pointer to stack-allocated net_buf_simple object.

NET_BUF_EXTERNAL_DATA: Flag indicating that the buffer’s associated data pointer, points to externally allocated memory. Therefore once ref goes down to zero, the pointed data will not need to be deallocated. This never needs to be explicitly set or unset by the net_buf API user. Such net_buf is exclusively instantiated via net_buf_alloc_with_data() function. Reference count mechanism however will behave the same way, and ref count going to 0 will free the net_buf but no the data pointer in it.

NET_BUF_POOL_HEAP_DEFINE(_name, _count, _ud_size, _destroy)

Define a new pool for buffers using the heap for the data.

Defines a net_buf_pool struct and the necessary memory storage (array of structs) for the needed amount of buffers. After this, the buffers can be accessed from the pool through net_buf_alloc. The pool is defined as a static variable, so if it needs to be exported outside the current module this needs to happen with the help of a separate pointer rather than an extern declaration.

The data payload of the buffers will be allocated from the heap using k_malloc, so CONFIG_HEAP_MEM_POOL_SIZE must be set to a positive value. This kind of pool does not support blocking on the data allocation, so the timeout passed to net_buf_alloc will be always treated as K_NO_WAIT when trying to allocate the data. This means that allocation failures, i.e. NULL returns, must always be handled cleanly.

If provided with a custom destroy callback, this callback is responsible for eventually calling net_buf_destroy() to complete the process of returning the buffer to the pool.

Parameters

_name – Name of the pool variable.
_count – Number of buffers in the pool.
_ud_size – User data space to reserve per buffer.
_destroy – Optional destroy callback when buffer is freed.

NET_BUF_POOL_FIXED_DEFINE(_name, _count, _data_size, _ud_size, _destroy)

Define a new pool for buffers based on fixed-size data.

Defines a net_buf_pool struct and the necessary memory storage (array of structs) for the needed amount of buffers. After this, the buffers can be accessed from the pool through net_buf_alloc. The pool is defined as a static variable, so if it needs to be exported outside the current module this needs to happen with the help of a separate pointer rather than an extern declaration.

The data payload of the buffers will be allocated from a byte array of fixed sized chunks. This kind of pool does not support blocking on the data allocation, so the timeout passed to net_buf_alloc will be always treated as K_NO_WAIT when trying to allocate the data. This means that allocation failures, i.e. NULL returns, must always be handled cleanly.

If provided with a custom destroy callback, this callback is responsible for eventually calling net_buf_destroy() to complete the process of returning the buffer to the pool.

Parameters

_name – Name of the pool variable.
_count – Number of buffers in the pool.
_data_size – Maximum data payload per buffer.
_ud_size – User data space to reserve per buffer.
_destroy – Optional destroy callback when buffer is freed.

NET_BUF_POOL_VAR_DEFINE(_name, _count, _data_size, _ud_size, _destroy)

Define a new pool for buffers with variable size payloads.

Defines a net_buf_pool struct and the necessary memory storage (array of structs) for the needed amount of buffers. After this, the buffers can be accessed from the pool through net_buf_alloc. The pool is defined as a static variable, so if it needs to be exported outside the current module this needs to happen with the help of a separate pointer rather than an extern declaration.

The data payload of the buffers will be based on a memory pool from which variable size payloads may be allocated.

If provided with a custom destroy callback, this callback is responsible for eventually calling net_buf_destroy() to complete the process of returning the buffer to the pool.

Parameters

_name – Name of the pool variable.
_count – Number of buffers in the pool.
_data_size – Total amount of memory available for data payloads.
_ud_size – User data space to reserve per buffer.
_destroy – Optional destroy callback when buffer is freed.

NET_BUF_POOL_DEFINE(_name, _count, _size, _ud_size, _destroy)

Define a new pool for buffers.

Defines a net_buf_pool struct and the necessary memory storage (array of structs) for the needed amount of buffers. After this,the buffers can be accessed from the pool through net_buf_alloc. The pool is defined as a static variable, so if it needs to be exported outside the current module this needs to happen with the help of a separate pointer rather than an extern declaration.

If provided with a custom destroy callback this callback is responsible for eventually calling net_buf_destroy() to complete the process of returning the buffer to the pool.

Parameters

_name – Name of the pool variable.
_count – Number of buffers in the pool.
_size – Maximum data size for each buffer.
_ud_size – Amount of user data space to reserve.
_destroy – Optional destroy callback when buffer is freed.

Typedefs

typedef struct net_buf *(*net_buf_allocator_cb)(k_timeout_t timeout, void *user_data)

Network buffer allocator callback.

The allocator callback is called when net_buf_append_bytes needs to allocate a new net_buf.

Param timeout: Affects the action taken should the net buf pool be empty. If K_NO_WAIT, then return immediately. If K_FOREVER, then wait as long as necessary. Otherwise, wait until the specified timeout.
Param user_data: The user data given in net_buf_append_bytes call.
Return: pointer to allocated net_buf or NULL on error.

Functions

static inline void net_buf_simple_init(struct net_buf_simple *buf, size_t reserve_head)

Initialize a net_buf_simple object.

This needs to be called after creating a net_buf_simple object using the NET_BUF_SIMPLE macro.

Parameters

buf – Buffer to initialize.
reserve_head – Headroom to reserve.

void net_buf_simple_init_with_data(struct net_buf_simple *buf, void *data, size_t size)

Initialize a net_buf_simple object with data.

Initialized buffer object with external data.

Parameters

buf – Buffer to initialize.
data – External data pointer
size – Amount of data the pointed data buffer if able to fit.

static inline void net_buf_simple_reset(struct net_buf_simple *buf)

Reset buffer.

Reset buffer data so it can be reused for other purposes.

Parameters

buf – Buffer to reset.

void net_buf_simple_clone(const struct net_buf_simple *original, struct net_buf_simple *clone)

Clone buffer state, using the same data buffer.

Initializes a buffer to point to the same data as an existing buffer. Allows operations on the same data without altering the length and offset of the original.

Parameters

original – Buffer to clone.
clone – The new clone.

void *net_buf_simple_add(struct net_buf_simple *buf, size_t len)

Prepare data to be added at the end of the buffer.

Increments the data length of a buffer to account for more data at the end.

Parameters

buf – Buffer to update.
len – Number of bytes to increment the length with.

Returns

The original tail of the buffer.

void *net_buf_simple_add_mem(struct net_buf_simple *buf, const void *mem, size_t len)

Copy given number of bytes from memory to the end of the buffer.

Increments the data length of the buffer to account for more data at the end.

Parameters

buf – Buffer to update.
mem – Location of data to be added.
len – Length of data to be added

Returns

The original tail of the buffer.

uint8_t *net_buf_simple_add_u8(struct net_buf_simple *buf, uint8_t val)

Add (8-bit) byte at the end of the buffer.

Increments the data length of the buffer to account for more data at the end.

Parameters

buf – Buffer to update.
val – byte value to be added.

Returns

Pointer to the value added

void net_buf_simple_add_le16(struct net_buf_simple *buf, uint16_t val)

Add 16-bit value at the end of the buffer.

Adds 16-bit value in little endian format at the end of buffer. Increments the data length of a buffer to account for more data at the end.

Parameters

buf – Buffer to update.
val – 16-bit value to be added.

void net_buf_simple_add_be16(struct net_buf_simple *buf, uint16_t val)

Add 16-bit value at the end of the buffer.

Adds 16-bit value in big endian format at the end of buffer. Increments the data length of a buffer to account for more data at the end.

Parameters

buf – Buffer to update.
val – 16-bit value to be added.

void net_buf_simple_add_le24(struct net_buf_simple *buf, uint32_t val)

Add 24-bit value at the end of the buffer.

Adds 24-bit value in little endian format at the end of buffer. Increments the data length of a buffer to account for more data at the end.

Parameters

buf – Buffer to update.
val – 24-bit value to be added.

void net_buf_simple_add_be24(struct net_buf_simple *buf, uint32_t val)

Add 24-bit value at the end of the buffer.

Adds 24-bit value in big endian format at the end of buffer. Increments the data length of a buffer to account for more data at the end.

Parameters

buf – Buffer to update.
val – 24-bit value to be added.

void net_buf_simple_add_le32(struct net_buf_simple *buf, uint32_t val)

Add 32-bit value at the end of the buffer.

Adds 32-bit value in little endian format at the end of buffer. Increments the data length of a buffer to account for more data at the end.

Parameters

buf – Buffer to update.
val – 32-bit value to be added.

void net_buf_simple_add_be32(struct net_buf_simple *buf, uint32_t val)

Add 32-bit value at the end of the buffer.

Adds 32-bit value in big endian format at the end of buffer. Increments the data length of a buffer to account for more data at the end.

Parameters

buf – Buffer to update.
val – 32-bit value to be added.

void net_buf_simple_add_le48(struct net_buf_simple *buf, uint64_t val)

Add 48-bit value at the end of the buffer.

Adds 48-bit value in little endian format at the end of buffer. Increments the data length of a buffer to account for more data at the end.

Parameters

buf – Buffer to update.
val – 48-bit value to be added.

void net_buf_simple_add_be48(struct net_buf_simple *buf, uint64_t val)

Add 48-bit value at the end of the buffer.

Adds 48-bit value in big endian format at the end of buffer. Increments the data length of a buffer to account for more data at the end.

Parameters

buf – Buffer to update.
val – 48-bit value to be added.

void net_buf_simple_add_le64(struct net_buf_simple *buf, uint64_t val)

Add 64-bit value at the end of the buffer.

Adds 64-bit value in little endian format at the end of buffer. Increments the data length of a buffer to account for more data at the end.

Parameters

buf – Buffer to update.
val – 64-bit value to be added.

void net_buf_simple_add_be64(struct net_buf_simple *buf, uint64_t val)

Add 64-bit value at the end of the buffer.

Adds 64-bit value in big endian format at the end of buffer. Increments the data length of a buffer to account for more data at the end.

Parameters

buf – Buffer to update.
val – 64-bit value to be added.

void *net_buf_simple_remove_mem(struct net_buf_simple *buf, size_t len)

Remove data from the end of the buffer.

Removes data from the end of the buffer by modifying the buffer length.

Parameters

buf – Buffer to update.
len – Number of bytes to remove.

Returns

New end of the buffer data.

uint8_t net_buf_simple_remove_u8(struct net_buf_simple *buf)

Remove a 8-bit value from the end of the buffer.

Same idea as with net_buf_simple_remove_mem(), but a helper for operating on 8-bit values.

Parameters

buf – A valid pointer on a buffer.

Returns

The 8-bit removed value

uint16_t net_buf_simple_remove_le16(struct net_buf_simple *buf)

Remove and convert 16 bits from the end of the buffer.

Same idea as with net_buf_simple_remove_mem(), but a helper for operating on 16-bit little endian data.

Parameters

buf – A valid pointer on a buffer.

Returns

16-bit value converted from little endian to host endian.

uint16_t net_buf_simple_remove_be16(struct net_buf_simple *buf)

Remove and convert 16 bits from the end of the buffer.

Same idea as with net_buf_simple_remove_mem(), but a helper for operating on 16-bit big endian data.

Parameters

buf – A valid pointer on a buffer.

Returns

16-bit value converted from big endian to host endian.

uint32_t net_buf_simple_remove_le24(struct net_buf_simple *buf)

Remove and convert 24 bits from the end of the buffer.

Same idea as with net_buf_simple_remove_mem(), but a helper for operating on 24-bit little endian data.

Parameters

buf – A valid pointer on a buffer.

Returns

24-bit value converted from little endian to host endian.

uint32_t net_buf_simple_remove_be24(struct net_buf_simple *buf)

Remove and convert 24 bits from the end of the buffer.

Same idea as with net_buf_simple_remove_mem(), but a helper for operating on 24-bit big endian data.

Parameters

buf – A valid pointer on a buffer.

Returns

24-bit value converted from big endian to host endian.

uint32_t net_buf_simple_remove_le32(struct net_buf_simple *buf)

Remove and convert 32 bits from the end of the buffer.

Same idea as with net_buf_simple_remove_mem(), but a helper for operating on 32-bit little endian data.

Parameters

buf – A valid pointer on a buffer.

Returns

32-bit value converted from little endian to host endian.

uint32_t net_buf_simple_remove_be32(struct net_buf_simple *buf)

Remove and convert 32 bits from the end of the buffer.

Same idea as with net_buf_simple_remove_mem(), but a helper for operating on 32-bit big endian data.

Parameters

buf – A valid pointer on a buffer.

Returns

32-bit value converted from big endian to host endian.

uint64_t net_buf_simple_remove_le48(struct net_buf_simple *buf)

Remove and convert 48 bits from the end of the buffer.

Same idea as with net_buf_simple_remove_mem(), but a helper for operating on 48-bit little endian data.

Parameters

buf – A valid pointer on a buffer.

Returns

48-bit value converted from little endian to host endian.

uint64_t net_buf_simple_remove_be48(struct net_buf_simple *buf)

Remove and convert 48 bits from the end of the buffer.

Same idea as with net_buf_simple_remove_mem(), but a helper for operating on 48-bit big endian data.

Parameters

buf – A valid pointer on a buffer.

Returns

48-bit value converted from big endian to host endian.

uint64_t net_buf_simple_remove_le64(struct net_buf_simple *buf)

Remove and convert 64 bits from the end of the buffer.

Same idea as with net_buf_simple_remove_mem(), but a helper for operating on 64-bit little endian data.

Parameters

buf – A valid pointer on a buffer.

Returns

64-bit value converted from little endian to host endian.

uint64_t net_buf_simple_remove_be64(struct net_buf_simple *buf)

Remove and convert 64 bits from the end of the buffer.

Same idea as with net_buf_simple_remove_mem(), but a helper for operating on 64-bit big endian data.

Parameters

buf – A valid pointer on a buffer.

Returns

64-bit value converted from big endian to host endian.

void *net_buf_simple_push(struct net_buf_simple *buf, size_t len)

Prepare data to be added to the start of the buffer.

Modifies the data pointer and buffer length to account for more data in the beginning of the buffer.

Parameters

buf – Buffer to update.
len – Number of bytes to add to the beginning.

Returns

The new beginning of the buffer data.

void *net_buf_simple_push_mem(struct net_buf_simple *buf, const void *mem, size_t len)

Copy given number of bytes from memory to the start of the buffer.

Modifies the data pointer and buffer length to account for more data in the beginning of the buffer.

Parameters

buf – Buffer to update.
mem – Location of data to be added.
len – Length of data to be added.

Returns

The new beginning of the buffer data.

void net_buf_simple_push_le16(struct net_buf_simple *buf, uint16_t val)

Push 16-bit value to the beginning of the buffer.

Adds 16-bit value in little endian format to the beginning of the buffer.

Parameters

buf – Buffer to update.
val – 16-bit value to be pushed to the buffer.

void net_buf_simple_push_be16(struct net_buf_simple *buf, uint16_t val)

Push 16-bit value to the beginning of the buffer.

Adds 16-bit value in big endian format to the beginning of the buffer.

Parameters

buf – Buffer to update.
val – 16-bit value to be pushed to the buffer.

void net_buf_simple_push_u8(struct net_buf_simple *buf, uint8_t val)

Push 8-bit value to the beginning of the buffer.

Adds 8-bit value the beginning of the buffer.

Parameters

buf – Buffer to update.
val – 8-bit value to be pushed to the buffer.

void net_buf_simple_push_le24(struct net_buf_simple *buf, uint32_t val)

Push 24-bit value to the beginning of the buffer.

Adds 24-bit value in little endian format to the beginning of the buffer.

Parameters

buf – Buffer to update.
val – 24-bit value to be pushed to the buffer.

void net_buf_simple_push_be24(struct net_buf_simple *buf, uint32_t val)

Push 24-bit value to the beginning of the buffer.

Adds 24-bit value in big endian format to the beginning of the buffer.

Parameters

buf – Buffer to update.
val – 24-bit value to be pushed to the buffer.

void net_buf_simple_push_le32(struct net_buf_simple *buf, uint32_t val)

Push 32-bit value to the beginning of the buffer.

Adds 32-bit value in little endian format to the beginning of the buffer.

Parameters

buf – Buffer to update.
val – 32-bit value to be pushed to the buffer.

void net_buf_simple_push_be32(struct net_buf_simple *buf, uint32_t val)

Push 32-bit value to the beginning of the buffer.

Adds 32-bit value in big endian format to the beginning of the buffer.

Parameters

buf – Buffer to update.
val – 32-bit value to be pushed to the buffer.

void net_buf_simple_push_le48(struct net_buf_simple *buf, uint64_t val)

Push 48-bit value to the beginning of the buffer.

Adds 48-bit value in little endian format to the beginning of the buffer.

Parameters

buf – Buffer to update.
val – 48-bit value to be pushed to the buffer.

void net_buf_simple_push_be48(struct net_buf_simple *buf, uint64_t val)

Push 48-bit value to the beginning of the buffer.

Adds 48-bit value in big endian format to the beginning of the buffer.

Parameters

buf – Buffer to update.
val – 48-bit value to be pushed to the buffer.

void net_buf_simple_push_le64(struct net_buf_simple *buf, uint64_t val)

Push 64-bit value to the beginning of the buffer.

Adds 64-bit value in little endian format to the beginning of the buffer.

Parameters

buf – Buffer to update.
val – 64-bit value to be pushed to the buffer.

void net_buf_simple_push_be64(struct net_buf_simple *buf, uint64_t val)

Push 64-bit value to the beginning of the buffer.

Adds 64-bit value in big endian format to the beginning of the buffer.

Parameters

buf – Buffer to update.
val – 64-bit value to be pushed to the buffer.

void *net_buf_simple_pull(struct net_buf_simple *buf, size_t len)

Remove data from the beginning of the buffer.

Removes data from the beginning of the buffer by modifying the data pointer and buffer length.

Parameters

buf – Buffer to update.
len – Number of bytes to remove.

Returns

New beginning of the buffer data.

void *net_buf_simple_pull_mem(struct net_buf_simple *buf, size_t len)

Remove data from the beginning of the buffer.

Removes data from the beginning of the buffer by modifying the data pointer and buffer length.

Parameters

buf – Buffer to update.
len – Number of bytes to remove.

Returns

Pointer to the old location of the buffer data.

uint8_t net_buf_simple_pull_u8(struct net_buf_simple *buf)

Remove a 8-bit value from the beginning of the buffer.

Same idea as with net_buf_simple_pull(), but a helper for operating on 8-bit values.

Parameters

buf – A valid pointer on a buffer.

Returns

The 8-bit removed value

uint16_t net_buf_simple_pull_le16(struct net_buf_simple *buf)

Remove and convert 16 bits from the beginning of the buffer.

Same idea as with net_buf_simple_pull(), but a helper for operating on 16-bit little endian data.

Parameters

buf – A valid pointer on a buffer.

Returns

16-bit value converted from little endian to host endian.

uint16_t net_buf_simple_pull_be16(struct net_buf_simple *buf)

Remove and convert 16 bits from the beginning of the buffer.

Same idea as with net_buf_simple_pull(), but a helper for operating on 16-bit big endian data.

Parameters

buf – A valid pointer on a buffer.

Returns

16-bit value converted from big endian to host endian.

uint32_t net_buf_simple_pull_le24(struct net_buf_simple *buf)

Remove and convert 24 bits from the beginning of the buffer.

Same idea as with net_buf_simple_pull(), but a helper for operating on 24-bit little endian data.

Parameters

buf – A valid pointer on a buffer.

Returns

24-bit value converted from little endian to host endian.

uint32_t net_buf_simple_pull_be24(struct net_buf_simple *buf)

Remove and convert 24 bits from the beginning of the buffer.

Same idea as with net_buf_simple_pull(), but a helper for operating on 24-bit big endian data.

Parameters

buf – A valid pointer on a buffer.

Returns

24-bit value converted from big endian to host endian.

uint32_t net_buf_simple_pull_le32(struct net_buf_simple *buf)

Remove and convert 32 bits from the beginning of the buffer.

Same idea as with net_buf_simple_pull(), but a helper for operating on 32-bit little endian data.

Parameters

buf – A valid pointer on a buffer.

Returns

32-bit value converted from little endian to host endian.

uint32_t net_buf_simple_pull_be32(struct net_buf_simple *buf)

Remove and convert 32 bits from the beginning of the buffer.

Same idea as with net_buf_simple_pull(), but a helper for operating on 32-bit big endian data.

Parameters

buf – A valid pointer on a buffer.

Returns

32-bit value converted from big endian to host endian.

uint64_t net_buf_simple_pull_le48(struct net_buf_simple *buf)

Remove and convert 48 bits from the beginning of the buffer.

Same idea as with net_buf_simple_pull(), but a helper for operating on 48-bit little endian data.

Parameters

buf – A valid pointer on a buffer.

Returns

48-bit value converted from little endian to host endian.

uint64_t net_buf_simple_pull_be48(struct net_buf_simple *buf)

Remove and convert 48 bits from the beginning of the buffer.

Same idea as with net_buf_simple_pull(), but a helper for operating on 48-bit big endian data.

Parameters

buf – A valid pointer on a buffer.

Returns

48-bit value converted from big endian to host endian.

uint64_t net_buf_simple_pull_le64(struct net_buf_simple *buf)

Remove and convert 64 bits from the beginning of the buffer.

Same idea as with net_buf_simple_pull(), but a helper for operating on 64-bit little endian data.

Parameters

buf – A valid pointer on a buffer.

Returns

64-bit value converted from little endian to host endian.

uint64_t net_buf_simple_pull_be64(struct net_buf_simple *buf)

Remove and convert 64 bits from the beginning of the buffer.

Same idea as with net_buf_simple_pull(), but a helper for operating on 64-bit big endian data.

Parameters

buf – A valid pointer on a buffer.

Returns

64-bit value converted from big endian to host endian.

static inline uint8_t *net_buf_simple_tail(struct net_buf_simple *buf)

Get the tail pointer for a buffer.

Get a pointer to the end of the data in a buffer.

Parameters

buf – Buffer.

Returns

Tail pointer for the buffer.

size_t net_buf_simple_headroom(struct net_buf_simple *buf)

Check buffer headroom.

Check how much free space there is in the beginning of the buffer.

buf A valid pointer on a buffer

Returns: Number of bytes available in the beginning of the buffer.

size_t net_buf_simple_tailroom(struct net_buf_simple *buf)

Check buffer tailroom.

Check how much free space there is at the end of the buffer.

Parameters

buf – A valid pointer on a buffer

Returns

Number of bytes available at the end of the buffer.

uint16_t net_buf_simple_max_len(struct net_buf_simple *buf)

Check maximum net_buf_simple::len value.

This value is depending on the number of bytes being reserved as headroom.

Parameters

buf – A valid pointer on a buffer

Returns

Number of bytes usable behind the net_buf_simple::data pointer.

static inline void net_buf_simple_save(struct net_buf_simple *buf, struct net_buf_simple_state *state)

Save the parsing state of a buffer.

Saves the parsing state of a buffer so it can be restored later.

Parameters

buf – Buffer from which the state should be saved.
state – Storage for the state.

static inline void net_buf_simple_restore(struct net_buf_simple *buf, struct net_buf_simple_state *state)

Restore the parsing state of a buffer.

Restores the parsing state of a buffer from a state previously stored by net_buf_simple_save().

Parameters

buf – Buffer to which the state should be restored.
state – Stored state.

struct net_buf_pool *net_buf_pool_get(int id)

Looks up a pool based on its ID.

Parameters

id – Pool ID (e.g. from buf->pool_id).

Returns

Pointer to pool.

int net_buf_id(struct net_buf *buf)

Get a zero-based index for a buffer.

This function will translate a buffer into a zero-based index, based on its placement in its buffer pool. This can be useful if you want to associate an external array of meta-data contexts with the buffers of a pool.

Parameters

buf – Network buffer.

Returns

Zero-based index for the buffer.

struct net_buf *net_buf_alloc_fixed(struct net_buf_pool *pool, k_timeout_t timeout)

Allocate a new fixed buffer from a pool.

Parameters

pool – Which pool to allocate the buffer from.
timeout – Affects the action taken should the pool be empty. If K_NO_WAIT, then return immediately. If K_FOREVER, then wait as long as necessary. Otherwise, wait until the specified timeout. Note that some types of data allocators do not support blocking (such as the HEAP type). In this case it’s still possible for net_buf_alloc() to fail (return NULL) even if it was given K_FOREVER.

Returns

New buffer or NULL if out of buffers.

static inline struct net_buf *net_buf_alloc(struct net_buf_pool *pool, k_timeout_t timeout)

Parameters

pool – Which pool to allocate the buffer from.
timeout – Affects the action taken should the pool be empty. If K_NO_WAIT, then return immediately. If K_FOREVER, then wait as long as necessary. Otherwise, wait until the specified timeout. Note that some types of data allocators do not support blocking (such as the HEAP type). In this case it’s still possible for net_buf_alloc() to fail (return NULL) even if it was given K_FOREVER.

Returns

New buffer or NULL if out of buffers.

struct net_buf *net_buf_alloc_len(struct net_buf_pool *pool, size_t size, k_timeout_t timeout)

Allocate a new variable length buffer from a pool.

Parameters

pool – Which pool to allocate the buffer from.
size – Amount of data the buffer must be able to fit.
timeout – Affects the action taken should the pool be empty. If K_NO_WAIT, then return immediately. If K_FOREVER, then wait as long as necessary. Otherwise, wait until the specified timeout. Note that some types of data allocators do not support blocking (such as the HEAP type). In this case it’s still possible for net_buf_alloc() to fail (return NULL) even if it was given K_FOREVER.

Returns

New buffer or NULL if out of buffers.

struct net_buf *net_buf_alloc_with_data(struct net_buf_pool *pool, void *data, size_t size, k_timeout_t timeout)

Allocate a new buffer from a pool but with external data pointer.

Allocate a new buffer from a pool, where the data pointer comes from the user and not from the pool.

Parameters

pool – Which pool to allocate the buffer from.
data – External data pointer
size – Amount of data the pointed data buffer if able to fit.
timeout – Affects the action taken should the pool be empty. If K_NO_WAIT, then return immediately. If K_FOREVER, then wait as long as necessary. Otherwise, wait until the specified timeout. Note that some types of data allocators do not support blocking (such as the HEAP type). In this case it’s still possible for net_buf_alloc() to fail (return NULL) even if it was given K_FOREVER.

Returns

New buffer or NULL if out of buffers.

struct net_buf *net_buf_get(struct k_fifo *fifo, k_timeout_t timeout)

Get a buffer from a FIFO.

This function is NOT thread-safe if the buffers in the FIFO contain fragments.

Parameters

fifo – Which FIFO to take the buffer from.
timeout – Affects the action taken should the FIFO be empty. If K_NO_WAIT, then return immediately. If K_FOREVER, then wait as long as necessary. Otherwise, wait until the specified timeout.

Returns

New buffer or NULL if the FIFO is empty.

static inline void net_buf_destroy(struct net_buf *buf)

Destroy buffer from custom destroy callback.

This helper is only intended to be used from custom destroy callbacks. If no custom destroy callback is given to NET_BUF_POOL_*_DEFINE() then there is no need to use this API.

Parameters

buf – Buffer to destroy.

void net_buf_reset(struct net_buf *buf)

Reset buffer.

Reset buffer data and flags so it can be reused for other purposes.

Parameters

buf – Buffer to reset.

void net_buf_simple_reserve(struct net_buf_simple *buf, size_t reserve)

Initialize buffer with the given headroom.

The buffer is not expected to contain any data when this API is called.

Parameters

buf – Buffer to initialize.
reserve – How much headroom to reserve.

void net_buf_slist_put(sys_slist_t *list, struct net_buf *buf)

Put a buffer into a list.

If the buffer contains follow-up fragments this function will take care of inserting them as well into the list.

Parameters

list – Which list to append the buffer to.
buf – Buffer.

struct net_buf *net_buf_slist_get(sys_slist_t *list)

Get a buffer from a list.

If the buffer had any fragments, these will automatically be recovered from the list as well and be placed to the buffer’s fragment list.

Parameters

list – Which list to take the buffer from.

Returns

New buffer or NULL if the FIFO is empty.

void net_buf_put(struct k_fifo *fifo, struct net_buf *buf)

Put a buffer to the end of a FIFO.

If the buffer contains follow-up fragments this function will take care of inserting them as well into the FIFO.

Parameters

fifo – Which FIFO to put the buffer to.
buf – Buffer.

void net_buf_unref(struct net_buf *buf)

Decrements the reference count of a buffer.

The buffer is put back into the pool if the reference count reaches zero.

Parameters

buf – A valid pointer on a buffer

struct net_buf *net_buf_ref(struct net_buf *buf)

Increment the reference count of a buffer.

Parameters

buf – A valid pointer on a buffer

Returns

the buffer newly referenced

struct net_buf *net_buf_clone(struct net_buf *buf, k_timeout_t timeout)

Clone buffer.

Duplicate given buffer including any data and headers currently stored.

Parameters

buf – A valid pointer on a buffer
timeout – Affects the action taken should the pool be empty. If K_NO_WAIT, then return immediately. If K_FOREVER, then wait as long as necessary. Otherwise, wait until the specified timeout.

Returns

Cloned buffer or NULL if out of buffers.

static inline void *net_buf_user_data(const struct net_buf *buf)

Get a pointer to the user data of a buffer.

Parameters

buf – A valid pointer on a buffer

Returns

Pointer to the user data of the buffer.

static inline void net_buf_reserve(struct net_buf *buf, size_t reserve)

Initialize buffer with the given headroom.

The buffer is not expected to contain any data when this API is called.

Parameters

buf – Buffer to initialize.
reserve – How much headroom to reserve.

static inline void *net_buf_add(struct net_buf *buf, size_t len)

Prepare data to be added at the end of the buffer.

Increments the data length of a buffer to account for more data at the end.

Parameters

buf – Buffer to update.
len – Number of bytes to increment the length with.

Returns

The original tail of the buffer.

static inline void *net_buf_add_mem(struct net_buf *buf, const void *mem, size_t len)

Copies the given number of bytes to the end of the buffer.

Increments the data length of the buffer to account for more data at the end.

Parameters

buf – Buffer to update.
mem – Location of data to be added.
len – Length of data to be added

Returns

The original tail of the buffer.

static inline uint8_t *net_buf_add_u8(struct net_buf *buf, uint8_t val)

Add (8-bit) byte at the end of the buffer.

Increments the data length of the buffer to account for more data at the end.

Parameters

buf – Buffer to update.
val – byte value to be added.

Returns

Pointer to the value added

static inline void net_buf_add_le16(struct net_buf *buf, uint16_t val)

Add 16-bit value at the end of the buffer.

Adds 16-bit value in little endian format at the end of buffer. Increments the data length of a buffer to account for more data at the end.

Parameters

buf – Buffer to update.
val – 16-bit value to be added.

static inline void net_buf_add_be16(struct net_buf *buf, uint16_t val)

Add 16-bit value at the end of the buffer.

Adds 16-bit value in big endian format at the end of buffer. Increments the data length of a buffer to account for more data at the end.

Parameters

buf – Buffer to update.
val – 16-bit value to be added.

static inline void net_buf_add_le24(struct net_buf *buf, uint32_t val)

Add 24-bit value at the end of the buffer.

Adds 24-bit value in little endian format at the end of buffer. Increments the data length of a buffer to account for more data at the end.

Parameters

buf – Buffer to update.
val – 24-bit value to be added.

static inline void net_buf_add_be24(struct net_buf *buf, uint32_t val)

Add 24-bit value at the end of the buffer.

Adds 24-bit value in big endian format at the end of buffer. Increments the data length of a buffer to account for more data at the end.

Parameters

buf – Buffer to update.
val – 24-bit value to be added.

static inline void net_buf_add_le32(struct net_buf *buf, uint32_t val)

Add 32-bit value at the end of the buffer.

Adds 32-bit value in little endian format at the end of buffer. Increments the data length of a buffer to account for more data at the end.

Parameters

buf – Buffer to update.
val – 32-bit value to be added.

static inline void net_buf_add_be32(struct net_buf *buf, uint32_t val)

Add 32-bit value at the end of the buffer.

Adds 32-bit value in big endian format at the end of buffer. Increments the data length of a buffer to account for more data at the end.

Parameters

buf – Buffer to update.
val – 32-bit value to be added.

static inline void net_buf_add_le48(struct net_buf *buf, uint64_t val)

Add 48-bit value at the end of the buffer.

Adds 48-bit value in little endian format at the end of buffer. Increments the data length of a buffer to account for more data at the end.

Parameters

buf – Buffer to update.
val – 48-bit value to be added.

static inline void net_buf_add_be48(struct net_buf *buf, uint64_t val)

Add 48-bit value at the end of the buffer.

Adds 48-bit value in big endian format at the end of buffer. Increments the data length of a buffer to account for more data at the end.

Parameters

buf – Buffer to update.
val – 48-bit value to be added.

static inline void net_buf_add_le64(struct net_buf *buf, uint64_t val)

Add 64-bit value at the end of the buffer.

Adds 64-bit value in little endian format at the end of buffer. Increments the data length of a buffer to account for more data at the end.

Parameters

buf – Buffer to update.
val – 64-bit value to be added.

static inline void net_buf_add_be64(struct net_buf *buf, uint64_t val)

Add 64-bit value at the end of the buffer.

Adds 64-bit value in big endian format at the end of buffer. Increments the data length of a buffer to account for more data at the end.

Parameters

buf – Buffer to update.
val – 64-bit value to be added.

static inline void *net_buf_remove_mem(struct net_buf *buf, size_t len)

Remove data from the end of the buffer.

Removes data from the end of the buffer by modifying the buffer length.

Parameters

buf – Buffer to update.
len – Number of bytes to remove.

Returns

New end of the buffer data.

static inline uint8_t net_buf_remove_u8(struct net_buf *buf)

Remove a 8-bit value from the end of the buffer.

Same idea as with net_buf_remove_mem(), but a helper for operating on 8-bit values.

Parameters

buf – A valid pointer on a buffer.

Returns

The 8-bit removed value

static inline uint16_t net_buf_remove_le16(struct net_buf *buf)

Remove and convert 16 bits from the end of the buffer.

Same idea as with net_buf_remove_mem(), but a helper for operating on 16-bit little endian data.

Parameters

buf – A valid pointer on a buffer.

Returns

16-bit value converted from little endian to host endian.

static inline uint16_t net_buf_remove_be16(struct net_buf *buf)

Remove and convert 16 bits from the end of the buffer.

Same idea as with net_buf_remove_mem(), but a helper for operating on 16-bit big endian data.

Parameters

buf – A valid pointer on a buffer.

Returns

16-bit value converted from big endian to host endian.

static inline uint32_t net_buf_remove_be24(struct net_buf *buf)

Remove and convert 24 bits from the end of the buffer.

Same idea as with net_buf_remove_mem(), but a helper for operating on 24-bit big endian data.

Parameters

buf – A valid pointer on a buffer.

Returns

24-bit value converted from big endian to host endian.

static inline uint32_t net_buf_remove_le24(struct net_buf *buf)

Remove and convert 24 bits from the end of the buffer.

Same idea as with net_buf_remove_mem(), but a helper for operating on 24-bit little endian data.

Parameters

buf – A valid pointer on a buffer.

Returns

24-bit value converted from little endian to host endian.

static inline uint32_t net_buf_remove_le32(struct net_buf *buf)

Remove and convert 32 bits from the end of the buffer.

Same idea as with net_buf_remove_mem(), but a helper for operating on 32-bit little endian data.

Parameters

buf – A valid pointer on a buffer.

Returns

32-bit value converted from little endian to host endian.

static inline uint32_t net_buf_remove_be32(struct net_buf *buf)

Remove and convert 32 bits from the end of the buffer.

Same idea as with net_buf_remove_mem(), but a helper for operating on 32-bit big endian data.

Parameters

buf – A valid pointer on a buffer

Returns

32-bit value converted from big endian to host endian.

static inline uint64_t net_buf_remove_le48(struct net_buf *buf)

Remove and convert 48 bits from the end of the buffer.

Same idea as with net_buf_remove_mem(), but a helper for operating on 48-bit little endian data.

Parameters

buf – A valid pointer on a buffer.

Returns

48-bit value converted from little endian to host endian.

static inline uint64_t net_buf_remove_be48(struct net_buf *buf)

Remove and convert 48 bits from the end of the buffer.

Same idea as with net_buf_remove_mem(), but a helper for operating on 48-bit big endian data.

Parameters

buf – A valid pointer on a buffer

Returns

48-bit value converted from big endian to host endian.

static inline uint64_t net_buf_remove_le64(struct net_buf *buf)

Remove and convert 64 bits from the end of the buffer.

Same idea as with net_buf_remove_mem(), but a helper for operating on 64-bit little endian data.

Parameters

buf – A valid pointer on a buffer.

Returns

64-bit value converted from little endian to host endian.

static inline uint64_t net_buf_remove_be64(struct net_buf *buf)

Remove and convert 64 bits from the end of the buffer.

Same idea as with net_buf_remove_mem(), but a helper for operating on 64-bit big endian data.

Parameters

buf – A valid pointer on a buffer

Returns

64-bit value converted from big endian to host endian.

static inline void *net_buf_push(struct net_buf *buf, size_t len)

Prepare data to be added at the start of the buffer.

Modifies the data pointer and buffer length to account for more data in the beginning of the buffer.

Parameters

buf – Buffer to update.
len – Number of bytes to add to the beginning.

Returns

The new beginning of the buffer data.

static inline void *net_buf_push_mem(struct net_buf *buf, const void *mem, size_t len)

Copies the given number of bytes to the start of the buffer.

Modifies the data pointer and buffer length to account for more data in the beginning of the buffer.

Parameters

buf – Buffer to update.
mem – Location of data to be added.
len – Length of data to be added.

Returns

The new beginning of the buffer data.

static inline void net_buf_push_u8(struct net_buf *buf, uint8_t val)

Push 8-bit value to the beginning of the buffer.

Adds 8-bit value the beginning of the buffer.

Parameters

buf – Buffer to update.
val – 8-bit value to be pushed to the buffer.

static inline void net_buf_push_le16(struct net_buf *buf, uint16_t val)

Push 16-bit value to the beginning of the buffer.

Adds 16-bit value in little endian format to the beginning of the buffer.

Parameters

buf – Buffer to update.
val – 16-bit value to be pushed to the buffer.

static inline void net_buf_push_be16(struct net_buf *buf, uint16_t val)

Push 16-bit value to the beginning of the buffer.

Adds 16-bit value in big endian format to the beginning of the buffer.

Parameters

buf – Buffer to update.
val – 16-bit value to be pushed to the buffer.

static inline void net_buf_push_le24(struct net_buf *buf, uint32_t val)

Push 24-bit value to the beginning of the buffer.

Adds 24-bit value in little endian format to the beginning of the buffer.

Parameters

buf – Buffer to update.
val – 24-bit value to be pushed to the buffer.

static inline void net_buf_push_be24(struct net_buf *buf, uint32_t val)

Push 24-bit value to the beginning of the buffer.

Adds 24-bit value in big endian format to the beginning of the buffer.

Parameters

buf – Buffer to update.
val – 24-bit value to be pushed to the buffer.

static inline void net_buf_push_le32(struct net_buf *buf, uint32_t val)

Push 32-bit value to the beginning of the buffer.

Adds 32-bit value in little endian format to the beginning of the buffer.

Parameters

buf – Buffer to update.
val – 32-bit value to be pushed to the buffer.

static inline void net_buf_push_be32(struct net_buf *buf, uint32_t val)

Push 32-bit value to the beginning of the buffer.

Adds 32-bit value in big endian format to the beginning of the buffer.

Parameters

buf – Buffer to update.
val – 32-bit value to be pushed to the buffer.

static inline void net_buf_push_le48(struct net_buf *buf, uint64_t val)

Push 48-bit value to the beginning of the buffer.

Adds 48-bit value in little endian format to the beginning of the buffer.

Parameters

buf – Buffer to update.
val – 48-bit value to be pushed to the buffer.

static inline void net_buf_push_be48(struct net_buf *buf, uint64_t val)

Push 48-bit value to the beginning of the buffer.

Adds 48-bit value in big endian format to the beginning of the buffer.

Parameters

buf – Buffer to update.
val – 48-bit value to be pushed to the buffer.

static inline void net_buf_push_le64(struct net_buf *buf, uint64_t val)

Push 64-bit value to the beginning of the buffer.

Adds 64-bit value in little endian format to the beginning of the buffer.

Parameters

buf – Buffer to update.
val – 64-bit value to be pushed to the buffer.

static inline void net_buf_push_be64(struct net_buf *buf, uint64_t val)

Push 64-bit value to the beginning of the buffer.

Adds 64-bit value in big endian format to the beginning of the buffer.

Parameters

buf – Buffer to update.
val – 64-bit value to be pushed to the buffer.

static inline void *net_buf_pull(struct net_buf *buf, size_t len)

Remove data from the beginning of the buffer.

Removes data from the beginning of the buffer by modifying the data pointer and buffer length.

Parameters

buf – Buffer to update.
len – Number of bytes to remove.

Returns

New beginning of the buffer data.

static inline void *net_buf_pull_mem(struct net_buf *buf, size_t len)

Remove data from the beginning of the buffer.

Removes data from the beginning of the buffer by modifying the data pointer and buffer length.

Parameters

buf – Buffer to update.
len – Number of bytes to remove.

Returns

Pointer to the old beginning of the buffer data.

static inline uint8_t net_buf_pull_u8(struct net_buf *buf)

Remove a 8-bit value from the beginning of the buffer.

Same idea as with net_buf_pull(), but a helper for operating on 8-bit values.

Parameters

buf – A valid pointer on a buffer.

Returns

The 8-bit removed value

static inline uint16_t net_buf_pull_le16(struct net_buf *buf)

Remove and convert 16 bits from the beginning of the buffer.

Same idea as with net_buf_pull(), but a helper for operating on 16-bit little endian data.

Parameters

buf – A valid pointer on a buffer.

Returns

16-bit value converted from little endian to host endian.

static inline uint16_t net_buf_pull_be16(struct net_buf *buf)

Remove and convert 16 bits from the beginning of the buffer.

Same idea as with net_buf_pull(), but a helper for operating on 16-bit big endian data.

Parameters

buf – A valid pointer on a buffer.

Returns

16-bit value converted from big endian to host endian.

static inline uint32_t net_buf_pull_le24(struct net_buf *buf)

Remove and convert 24 bits from the beginning of the buffer.

Same idea as with net_buf_pull(), but a helper for operating on 24-bit little endian data.

Parameters

buf – A valid pointer on a buffer.

Returns

24-bit value converted from little endian to host endian.

static inline uint32_t net_buf_pull_be24(struct net_buf *buf)

Remove and convert 24 bits from the beginning of the buffer.

Same idea as with net_buf_pull(), but a helper for operating on 24-bit big endian data.

Parameters

buf – A valid pointer on a buffer.

Returns

24-bit value converted from big endian to host endian.

static inline uint32_t net_buf_pull_le32(struct net_buf *buf)

Remove and convert 32 bits from the beginning of the buffer.

Same idea as with net_buf_pull(), but a helper for operating on 32-bit little endian data.

Parameters

buf – A valid pointer on a buffer.

Returns

32-bit value converted from little endian to host endian.

static inline uint32_t net_buf_pull_be32(struct net_buf *buf)

Remove and convert 32 bits from the beginning of the buffer.

Same idea as with net_buf_pull(), but a helper for operating on 32-bit big endian data.

Parameters

buf – A valid pointer on a buffer

Returns

32-bit value converted from big endian to host endian.

static inline uint64_t net_buf_pull_le48(struct net_buf *buf)

Remove and convert 48 bits from the beginning of the buffer.

Same idea as with net_buf_pull(), but a helper for operating on 48-bit little endian data.

Parameters

buf – A valid pointer on a buffer.

Returns

48-bit value converted from little endian to host endian.

static inline uint64_t net_buf_pull_be48(struct net_buf *buf)

Remove and convert 48 bits from the beginning of the buffer.

Same idea as with net_buf_pull(), but a helper for operating on 48-bit big endian data.

Parameters

buf – A valid pointer on a buffer

Returns

48-bit value converted from big endian to host endian.

static inline uint64_t net_buf_pull_le64(struct net_buf *buf)

Remove and convert 64 bits from the beginning of the buffer.

Same idea as with net_buf_pull(), but a helper for operating on 64-bit little endian data.

Parameters

buf – A valid pointer on a buffer.

Returns

64-bit value converted from little endian to host endian.

static inline uint64_t net_buf_pull_be64(struct net_buf *buf)

Remove and convert 64 bits from the beginning of the buffer.

Same idea as with net_buf_pull(), but a helper for operating on 64-bit big endian data.

Parameters

buf – A valid pointer on a buffer

Returns

64-bit value converted from big endian to host endian.

static inline size_t net_buf_tailroom(struct net_buf *buf)

Check buffer tailroom.

Check how much free space there is at the end of the buffer.

Parameters

buf – A valid pointer on a buffer

Returns

Number of bytes available at the end of the buffer.

static inline size_t net_buf_headroom(struct net_buf *buf)

Check buffer headroom.

Check how much free space there is in the beginning of the buffer.

buf A valid pointer on a buffer

Returns: Number of bytes available in the beginning of the buffer.

static inline uint16_t net_buf_max_len(struct net_buf *buf)

Check maximum net_buf::len value.

This value is depending on the number of bytes being reserved as headroom.

Parameters

buf – A valid pointer on a buffer

Returns

Number of bytes usable behind the net_buf::data pointer.

static inline uint8_t *net_buf_tail(struct net_buf *buf)

Get the tail pointer for a buffer.

Get a pointer to the end of the data in a buffer.

Parameters

buf – Buffer.

Returns

Tail pointer for the buffer.

struct net_buf *net_buf_frag_last(struct net_buf *frags)

Find the last fragment in the fragment list.

Returns: Pointer to last fragment in the list.

void net_buf_frag_insert(struct net_buf *parent, struct net_buf *frag)

Insert a new fragment to a chain of bufs.

Insert a new fragment into the buffer fragments list after the parent.

Note: This function takes ownership of the fragment reference so the caller is not required to unref.

Parameters

parent – Parent buffer/fragment.
frag – Fragment to insert.

struct net_buf *net_buf_frag_add(struct net_buf *head, struct net_buf *frag)

Add a new fragment to the end of a chain of bufs.

Append a new fragment into the buffer fragments list.

Note: This function takes ownership of the fragment reference so the caller is not required to unref.

Parameters

head – Head of the fragment chain.
frag – Fragment to add.

Returns

New head of the fragment chain. Either head (if head was non-NULL) or frag (if head was NULL).

struct net_buf *net_buf_frag_del(struct net_buf *parent, struct net_buf *frag)

Delete existing fragment from a chain of bufs.

Parameters

parent – Parent buffer/fragment, or NULL if there is no parent.
frag – Fragment to delete.

Returns

Pointer to the buffer following the fragment, or NULL if it had no further fragments.

size_t net_buf_linearize(void *dst, size_t dst_len, struct net_buf *src, size_t offset, size_t len)

Copy bytes from net_buf chain starting at offset to linear buffer.

Copy (extract) len bytes from src net_buf chain, starting from offset in it, to a linear buffer dst. Return number of bytes actually copied, which may be less than requested, if net_buf chain doesn’t have enough data, or destination buffer is too small.

Parameters

dst – Destination buffer
dst_len – Destination buffer length
src – Source net_buf chain
offset – Starting offset to copy from
len – Number of bytes to copy

Returns

number of bytes actually copied

size_t net_buf_append_bytes(struct net_buf *buf, size_t len, const void *value, k_timeout_t timeout, net_buf_allocator_cb allocate_cb, void *user_data)

Append data to a list of net_buf.

Append data to a net_buf. If there is not enough space in the net_buf then more net_buf will be added, unless there are no free net_buf and timeout occurs. If not allocator is provided it attempts to allocate from the same pool as the original buffer.

Parameters

buf – Network buffer.
len – Total length of input data
value – Data to be added
timeout – Timeout is passed to the net_buf allocator callback.
allocate_cb – When a new net_buf is required, use this callback.
user_data – A user data pointer to be supplied to the allocate_cb. This pointer is can be anything from a mem_pool or a net_pkt, the logic is left up to the allocate_cb function.

Returns

Length of data actually added. This may be less than input length if other timeout than K_FOREVER was used, and there were no free fragments in a pool to accommodate all data.

static inline struct net_buf *net_buf_skip(struct net_buf *buf, size_t len)

Skip N number of bytes in a net_buf.

Skip N number of bytes starting from fragment’s offset. If the total length of data is placed in multiple fragments, this function will skip from all fragments until it reaches N number of bytes. Any fully skipped buffers are removed from the net_buf list.

Parameters

buf – Network buffer.
len – Total length of data to be skipped.

Returns

Pointer to the fragment or NULL and pos is 0 after successful skip, NULL and pos is 0xffff otherwise.

static inline size_t net_buf_frags_len(struct net_buf *buf)

Calculate amount of bytes stored in fragments.

Calculates the total amount of data stored in the given buffer and the fragments linked to it.

Parameters

buf – Buffer to start off with.

Returns

Number of bytes in the buffer and its fragments.

struct net_buf_simple

#include <buf.h>

Simple network buffer representation.

This is a simpler variant of the net_buf object (in fact net_buf uses net_buf_simple internally). It doesn’t provide any kind of reference counting, user data, dynamic allocation, or in general the ability to pass through kernel objects such as FIFOs.

The main use of this is for scenarios where the meta-data of the normal net_buf isn’t needed and causes too much overhead. This could be e.g. when the buffer only needs to be allocated on the stack or when the access to and lifetime of the buffer is well controlled and constrained.

Public Members

uint8_t *data: Pointer to the start of data in the buffer.

uint16_t len

Length of the data behind the data pointer.

To determine the max length, use net_buf_simple_max_len(), not size!

uint16_t size: Amount of data that net_buf_simple::__buf can store.

struct net_buf_simple_state

#include <buf.h>

Parsing state of a buffer.

This is used for temporarily storing the parsing state of a buffer while giving control of the parsing to a routine which we don’t control.

Public Members

uint16_t offset: Offset of the data pointer from the beginning of the storage

uint16_t len: Length of data

struct net_buf

#include <buf.h>

Network buffer representation.

This struct is used to represent network buffers. Such buffers are normally defined through the NET_BUF_POOL_*_DEFINE() APIs and allocated using the net_buf_alloc() API.

Public Members

sys_snode_t node: Allow placing the buffer into sys_slist_t

struct net_buf *frags: Fragments associated with this buffer.

uint8_t ref: Reference count.

uint8_t flags: Bit-field of buffer flags.

uint8_t pool_id: Where the buffer should go when freed up.

uint8_t *data: Pointer to the start of data in the buffer.

uint16_t len: Length of the data behind the data pointer.

uint16_t size: Amount of data that this buffer can store.

uint8_t user_data[]: System metadata for this buffer.

struct net_buf_data_cb: #include <buf.h>

struct net_buf_data_alloc: #include <buf.h>

struct net_buf_pool

#include <buf.h>

Network buffer pool representation.

This struct is used to represent a pool of network buffers.

Public Members

struct k_lifo free: LIFO to place the buffer into when free

const uint16_t buf_count: Number of buffers in pool

uint16_t uninit_count: Number of uninitialized buffers

void (*const destroy)(struct net_buf *buf): Optional destroy callback when buffer is freed.

const struct net_buf_data_alloc *alloc: Data allocation handlers.

struct net_buf_pool_fixed: #include <buf.h>

Network Buffer

Overview

Creating buffers

Common Operations

Reference Counting

API Reference

Overview 

Creating buffers 

Common Operations 

Reference Counting 

API Reference 