st,stm32-timers

Description

STM32 timers

Properties

Properties not inherited from the base binding file.

Name	Type	Details
`resets`	`phandle-array`	Reset information This property is required.
`st,prescaler`	`int`	Clock prescaler at the input of the timer Could be in range [0 .. 0xFFFF] for STM32 General Purpose Timers (CLK/(prescaler+1) ) This property is required.
`st,countermode`	`int`	Sets timer counter mode. Use constants defined in dt-bindings/timer/stm32-timer.h. * STM32_TIM_COUNTERMODE_UP - used as upcounter. * STM32_TIM_COUNTERMODE_DOWN - used as downcounter. * STM32_TIM_COUNTERMODE_CENTER_DOWN - counts up and down alternatively. Output compare interrupt flags of output channels are set only when the counter is counting down. * STM32_TIM_COUNTERMODE_CENTER_UP - counts up and down alternatively. Output compare interrupt flags of output channels are set only when the counter is counting up. * STM32_TIM_COUNTERMODE_CENTER_UP_DOWN - counts up and down alternatively. Output compare interrupt flags of output channels are set only when the counter is counting up or down. If absent, then STM32_TIM_COUNTERMODE_UP is used (reset state).
`reset-names`	`string-array`	Name of each reset

Properties inherited from the base binding file, which defines common properties that may be set on many nodes. Not all of these may apply to the “st,stm32-timers” compatible.

Name	Type	Details
`reg`	`array`	register space This property is required. See Important properties for more information.
`clocks`	`phandle-array`	Clock gate information This property is required.
`status`	`string`	indicates the operational status of a device Legal values: `'ok'`, `'okay'`, `'disabled'`, `'reserved'`, `'fail'`, `'fail-sss'` See Important properties for more information.
`compatible`	`string-array`	compatible strings This property is required. See Important properties for more information.
`reg-names`	`string-array`	name of each register space
`interrupts`	`array`	interrupts for device See Important properties for more information.
`interrupts-extended`	`compound`	extended interrupt specifier for device
`interrupt-names`	`string-array`	name of each interrupt
`interrupt-parent`	`phandle`	phandle to interrupt controller node
`label`	`string`	Human readable string describing the device (used as device_get_binding() argument) See Important properties for more information. This property is deprecated.
`clock-names`	`string-array`	name of each clock
`#address-cells`	`int`	number of address cells in reg property
`#size-cells`	`int`	number of size cells in reg property
`dmas`	`phandle-array`	DMA channels specifiers
`dma-names`	`string-array`	Provided names of DMA channel specifiers
`io-channels`	`phandle-array`	IO channels specifiers
`io-channel-names`	`string-array`	Provided names of IO channel specifiers
`mboxes`	`phandle-array`	mailbox / IPM channels specifiers
`mbox-names`	`string-array`	Provided names of mailbox / IPM channel specifiers
`wakeup-source`	`boolean`	Property to identify that a device can be used as wake up source. When this property is provided a specific flag is set into the device that tells the system that the device is capable of wake up the system. Wake up capable devices are disabled (interruptions will not wake up the system) by default but they can be enabled at runtime if necessary.
`power-domain`	`phandle`	Power domain the device belongs to. The device will be notified when the power domain it belongs to is either suspended or resumed.