st,stm32-temp-cal

Description

STM32 family TEMP node for production calibrated sensors like L5/U5

Properties

Properties not inherited from the base binding file.

Name	Type	Details
`ts-cal1-addr`	`int`	address of parameter TS_CAL1 This property is required.
`ts-cal2-addr`	`int`	address of parameter TS_CAL2 This property is required.
`ts-cal1-temp`	`int`	temperature at which temperature sensor has been calibrated in production for data into ts-cal1-addr This property is required.
`ts-cal2-temp`	`int`	temperature at which temperature sensor has been calibrated in production for data into ts-cal2-addr This property is required.
`ts-cal-vrefanalog`	`int`	Analog voltage reference (Vref+) voltage with which temperature sensor has been calibrated in production This property is required.
`ts-cal-resolution`	`int`	Temperature calibration resolution with which the ts-cal1-temp and ts-cal2-temp are measured. For most stm32 series a native 12-bit ADC is embedded in the device, except for H7 on 16-bit and U5 on 14-bit Default value: `12` Legal values: `12`, `14`, `16`
`friendly-name`	`string`	Human readable string describing the sensor. It can be used to distinguish multiple instances of the same model (e.g., lid accelerometer vs. base accelerometer in a laptop) to a host operating system. This property is defined in the Generic Sensor Property Usages of the HID Usage Tables specification (https://usb.org/sites/default/files/hut1_3_0.pdf, section 22.5).

Properties inherited from the base binding file, which defines common properties that may be set on many nodes. Not all of these may apply to the “st,stm32-temp-cal” compatible.

Name	Type	Details
`status`	`string`	indicates the operational status of a device Legal values: `'ok'`, `'okay'`, `'disabled'`, `'reserved'`, `'fail'`, `'fail-sss'` See Important properties for more information.
`compatible`	`string-array`	compatible strings This property is required. See Important properties for more information.
`reg`	`array`	register space See Important properties for more information.
`reg-names`	`string-array`	name of each register space
`interrupts`	`array`	interrupts for device See Important properties for more information.
`interrupts-extended`	`compound`	extended interrupt specifier for device
`interrupt-names`	`string-array`	name of each interrupt
`interrupt-parent`	`phandle`	phandle to interrupt controller node
`label`	`string`	Human readable string describing the device (used as device_get_binding() argument) See Important properties for more information. This property is deprecated.
`clocks`	`phandle-array`	Clock gate information
`clock-names`	`string-array`	name of each clock
`#address-cells`	`int`	number of address cells in reg property
`#size-cells`	`int`	number of size cells in reg property
`dmas`	`phandle-array`	DMA channels specifiers
`dma-names`	`string-array`	Provided names of DMA channel specifiers
`io-channels`	`phandle-array`	IO channels specifiers This property is required.
`io-channel-names`	`string-array`	Provided names of IO channel specifiers
`mboxes`	`phandle-array`	mailbox / IPM channels specifiers
`mbox-names`	`string-array`	Provided names of mailbox / IPM channel specifiers
`wakeup-source`	`boolean`	Property to identify that a device can be used as wake up source. When this property is provided a specific flag is set into the device that tells the system that the device is capable of wake up the system. Wake up capable devices are disabled (interruptions will not wake up the system) by default but they can be enabled at runtime if necessary.
`power-domain`	`phandle`	Power domain the device belongs to. The device will be notified when the power domain it belongs to is either suspended or resumed.