NXP MCUX Analog Comparator (ACMP)

Overview

This sample show how to use the NXP MCUX Analog Comparator (ACMP) driver. The sample supports the NXP TWR-KE18F, NXP MIMXRT1170-EVK.

The input voltage for the the negative input of the analog comparator is provided by the ACMP Digital-to-Analog Converter (DAC). The input voltage for the positive input can be adjusted by turning the on-board potentiometer for NXP TWR-KE18F board, for NXP MIMXRT1170-EVK the voltage signal is captured on J25-13, need change the external voltage signal to check the output.

The output value of the analog comparator is reported on the console.

Building and Running

Building and Running for TWR-KE18F

Build the application for the NXP TWR-KE18F board, and adjust the ACMP input voltage by turning the on-board potentiometer.

west build -b twr_ke18f samples/drivers/mcux_acmp
west flash

Building and Running for MIMXRT1170-EVK

Build the application for the MIMXRT1170-EVK board, and adjust the ACMP input voltage by changing the voltage input to J25-13.

west build -b mimxrt1170_evk_cm7 samples/drivers/mcux_acmp
west flash