Corstone SSE-300 with Ethos-U55 Example Subsystem for MPS3 (AN552) and FVP

Building TF-M

Follow the instructions in Building instructions. Build instructions with platform name: arm/mps3/an552 -DTFM_PLATFORM=arm/mps3/an552

Note

This platform support does not provide software for Ethos-U55 IP, only contains base address and interrupt number for it.

Note

The built binaries can be run on both the Corstone-300 Ethos-U55 Ecosystem FVP (FVP_SSE300_MPS3) and Corstone SSE-300 with Ethos-U55 Example Subsystem for MPS3 (AN552). For the FVP, at least version 11.16 is required.

To run the example code on AN552

FPGA image is available to download here

To run BL2 bootloader and TF-M example application and tests in the MPS3 board, it is required to have AN552 image in the MPS3 board SD card. The image should be located in <MPS3 device name>/MB/HBI<BoardNumberBoardrevision>/AN552

The MPS3 board tested is HBI0309C.

Copy bl2.bin and tfm_s_ns_signed.bin files from build dir to <MPS3 device name>/SOFTWARE/
Rename tfm_s_ns_signed.bin to tfm.bin (Filename should not be longer than 8 charachters.)
Open <MPS3 device name>/MB/HBI0309C/AN552/images.txt

Update the images.txt file as follows:

TITLE: Arm MPS3 FPGA prototyping board Images Configuration File

[IMAGES]
TOTALIMAGES: 2                     ;Number of Images (Max: 32)

IMAGE0UPDATE: AUTO                 ;Image Update:NONE/AUTO/FORCE
IMAGE0ADDRESS: 0x00000000          ;Please select the required executable program
IMAGE0FILE: \SOFTWARE\bl2.bin
IMAGE1UPDATE: AUTO
IMAGE1ADDRESS: 0x02000000
IMAGE1FILE: \SOFTWARE\tfm.bin

Close <MPS3 device name>/MB/HBI0309C/AN552/images.txt
Unmount/eject the <MPS3 device name> unit
Reset the board to execute the TF-M example application

After completing the procedure you should be able to visualize on the serial port (baud 115200 8n1) the following messages:

[INF] Starting bootloader
[INF] Swap type: none
[INF] Swap type: none
[INF] Bootloader chainload address offset: 0x0
[INF] Jumping to the first image slot
[Sec Thread] Secure image initializing!
Booting TFM v1.4.0
[Crypto] Dummy Entropy NV Seed is not suitable for production!
Non-Secure system starting...

Note

Some of the messages above are only visible when CMAKE_BUILD_TYPE is set to Debug.

To run the example code on Corstone-300 Ethos-U55 Ecosystem FVP

FVP is available to download here

Install the FVP
Copy bl2.axf and tfm_s_ns_signed.bin files from build dir to <FVP installation path>/models/Linux64_GCC-6.4/

Navigate to the same directory and execute the following command to start FVP:

$ ./FVP_Corstone_SSE-300_Ethos-U55 -a cpu0*="bl2.axf" --data "tfm_s_ns_signed.bin"@0x01000000

After completing the procedure you should be able to visualize on the serial port the following messages:

Trying 127.0.0.1...
Connected to localhost.
Escape character is '^]'.
[INF] Starting bootloader
[INF] Swap type: none
[INF] Swap type: none
[INF] Bootloader chainload address offset: 0x0
[INF] Jumping to the first image slot
[Sec Thread] Secure image initializing!
Booting TFM v1.4.0
[Crypto] Dummy Entropy NV Seed is not suitable for production!
Non-Secure system starting...

Note

Some of the messages above are only visible when CMAKE_BUILD_TYPE is set to Debug.