Logging

The logging API provides a common interface to process messages issued by developers. Messages are passed through a frontend and are then processed by active backends. Custom frontend and backends can be used if needed.

Summary of the logging features:

  • Deferred logging reduces the time needed to log a message by shifting time consuming operations to a known context instead of processing and sending the log message when called.

  • Multiple backends supported (up to 9 backends).

  • Custom frontend support. It can work together with backends.

  • Compile time filtering on module level.

  • Run time filtering independent for each backend.

  • Additional run time filtering on module instance level.

  • Timestamping with user provided function. Timestamp can have 32 or 64 bits.

  • Dedicated API for dumping data.

  • Dedicated API for handling transient strings.

  • Panic support - in panic mode logging switches to blocking, synchronous processing.

  • Printk support - printk message can be redirected to the logging.

  • Design ready for multi-domain/multi-processor system.

  • Support for logging floating point variables and long long arguments.

  • Built-in copying of transient strings used as arguments.

Logging API is highly configurable at compile time as well as at run time. Using Kconfig options (see Global Kconfig Options) logs can be gradually removed from compilation to reduce image size and execution time when logs are not needed. During compilation logs can be filtered out on module basis and severity level.

Logs can also be compiled in but filtered on run time using dedicate API. Run time filtering is independent for each backend and each source of log messages. Source of log messages can be a module or specific instance of the module.

There are four severity levels available in the system: error, warning, info and debug. For each severity level the logging API (include/zephyr/logging/log.h) has set of dedicated macros. Logger API also has macros for logging data.

For each level following set of macros are available:

  • LOG_X for standard printf-like messages, e.g. LOG_ERR.

  • LOG_HEXDUMP_X for dumping data, e.g. LOG_HEXDUMP_WRN.

  • LOG_INST_X for standard printf-like message associated with the particular instance, e.g. LOG_INST_INF.

  • LOG_INST_HEXDUMP_X for dumping data associated with the particular instance, e.g. LOG_HEXDUMP_INST_DBG

There are two configuration categories: configurations per module and global configuration. When logging is enabled globally, it works for modules. However, modules can disable logging locally. Every module can specify its own logging level. The module must define the LOG_LEVEL macro before using the API. Unless a global override is set, the module logging level will be honored. The global override can only increase the logging level. It cannot be used to lower module logging levels that were previously set higher. It is also possible to globally limit logs by providing maximal severity level present in the system, where maximal means lowest severity (e.g. if maximal level in the system is set to info, it means that errors, warnings and info levels are present but debug messages are excluded).

Each module which is using the logging must specify its unique name and register itself to the logging. If module consists of more than one file, registration is performed in one file but each file must define a module name.

Logger’s default frontend is designed to be thread safe and minimizes time needed to log the message. Time consuming operations like string formatting or access to the transport are not performed by default when logging API is called. When logging API is called a message is created and added to the list. Dedicated, configurable buffer for pool of log messages is used. There are 2 types of messages: standard and hexdump. Each message contain source ID (module or instance ID and domain ID which might be used for multiprocessor systems), timestamp and severity level. Standard message contains pointer to the string and arguments. Hexdump message contains copied data and string.

Global Kconfig Options

These options can be found in the following path subsys/logging/Kconfig.

CONFIG_LOG: Global switch, turns on/off the logging.

Mode of operations:

CONFIG_LOG_MODE_DEFERRED: Deferred mode.

CONFIG_LOG_MODE_IMMEDIATE: Immediate (synchronous) mode.

CONFIG_LOG_MODE_MINIMAL: Minimal footprint mode.

Filtering options:

CONFIG_LOG_RUNTIME_FILTERING: Enables runtime reconfiguration of the filtering.

CONFIG_LOG_DEFAULT_LEVEL: Default level, sets the logging level used by modules that are not setting their own logging level.

CONFIG_LOG_OVERRIDE_LEVEL: It overrides module logging level when it is not set or set lower than the override value.

CONFIG_LOG_MAX_LEVEL: Maximal (lowest severity) level which is compiled in.

Processing options:

CONFIG_LOG_MODE_OVERFLOW: When new message cannot be allocated, oldest one are discarded.

CONFIG_LOG_BLOCK_IN_THREAD: If enabled and new log message cannot be allocated thread context will block for up to CONFIG_LOG_BLOCK_IN_THREAD_TIMEOUT_MS or until log message is allocated.

CONFIG_LOG_PRINTK: Redirect printk calls to the logging.

CONFIG_LOG_PROCESS_TRIGGER_THRESHOLD: When number of buffered log messages reaches the threshold dedicated thread (see log_thread_set()) is waken up. If CONFIG_LOG_PROCESS_THREAD is enabled then this threshold is used by the internal thread.

CONFIG_LOG_PROCESS_THREAD: When enabled, logging thread is created which handles log processing.

CONFIG_LOG_PROCESS_THREAD_STARTUP_DELAY_MS: Delay in milliseconds after which logging thread is started.

CONFIG_LOG_BUFFER_SIZE: Number of bytes dedicated for the circular packet buffer.

CONFIG_LOG_DOMAIN_ID: Domain ID. Valid in multi-domain systems.

CONFIG_LOG_FRONTEND: Direct logs to a custom frontend.

CONFIG_LOG_FRONTEND_ONLY: No backends are used when messages goes to frontend.

CONFIG_LOG_TIMESTAMP_64BIT: 64 bit timestamp.

Formatting options:

CONFIG_LOG_FUNC_NAME_PREFIX_ERR: Prepend standard ERROR log messages with function name. Hexdump messages are not prepended.

CONFIG_LOG_FUNC_NAME_PREFIX_WRN: Prepend standard WARNING log messages with function name. Hexdump messages are not prepended.

CONFIG_LOG_FUNC_NAME_PREFIX_INF: Prepend standard INFO log messages with function name. Hexdump messages are not prepended.

CONFIG_LOG_FUNC_NAME_PREFIX_DBG: Prepend standard DEBUG log messages with function name. Hexdump messages are not prepended.

CONFIG_LOG_BACKEND_SHOW_COLOR: Enables coloring of errors (red) and warnings (yellow).

CONFIG_LOG_BACKEND_FORMAT_TIMESTAMP: If enabled timestamp is formatted to hh:mm:ss:mmm,uuu. Otherwise is printed in raw format.

Backend options:

CONFIG_LOG_BACKEND_UART: Enabled built-in UART backend.

Usage

Logging in a module

In order to use logging in the module, a unique name of a module must be specified and module must be registered using LOG_MODULE_REGISTER. Optionally, a compile time log level for the module can be specified as the second parameter. Default log level (CONFIG_LOG_DEFAULT_LEVEL) is used if custom log level is not provided.

#include <zephyr/logging/log.h>
LOG_MODULE_REGISTER(foo, CONFIG_FOO_LOG_LEVEL);

If the module consists of multiple files, then LOG_MODULE_REGISTER() should appear in exactly one of them. Each other file should use LOG_MODULE_DECLARE to declare its membership in the module. Optionally, a compile time log level for the module can be specified as the second parameter. Default log level (CONFIG_LOG_DEFAULT_LEVEL) is used if custom log level is not provided.

#include <zephyr/logging/log.h>
/* In all files comprising the module but one */
LOG_MODULE_DECLARE(foo, CONFIG_FOO_LOG_LEVEL);

In order to use logging API in a function implemented in a header file LOG_MODULE_DECLARE macro must be used in the function body before logging API is called. Optionally, a compile time log level for the module can be specified as the second parameter. Default log level (CONFIG_LOG_DEFAULT_LEVEL) is used if custom log level is not provided.

#include <zephyr/logging/log.h>

static inline void foo(void)
{
     LOG_MODULE_DECLARE(foo, CONFIG_FOO_LOG_LEVEL);

     LOG_INF("foo");
}

Dedicated Kconfig template (subsys/logging/Kconfig.template.log_config) can be used to create local log level configuration.

Example below presents usage of the template. As a result CONFIG_FOO_LOG_LEVEL will be generated:

module = FOO
module-str = foo
source "subsys/logging/Kconfig.template.log_config"

Logging in a module instance

In case of modules which are multi-instance and instances are widely used across the system enabling logs will lead to flooding. Logger provide the tools which can be used to provide filtering on instance level rather than module level. In that case logging can be enabled for particular instance.

In order to use instance level filtering following steps must be performed:

  • a pointer to specific logging structure is declared in instance structure. LOG_INSTANCE_PTR_DECLARE is used for that.

#include <zephyr/logging/log_instance.h>

struct foo_object {
     LOG_INSTANCE_PTR_DECLARE(log);
     uint32_t id;
}
  • module must provide macro for instantiation. In that macro, logging instance is registered and log instance pointer is initialized in the object structure.

#define FOO_OBJECT_DEFINE(_name)                             \
     LOG_INSTANCE_REGISTER(foo, _name, CONFIG_FOO_LOG_LEVEL) \
     struct foo_object _name = {                             \
             LOG_INSTANCE_PTR_INIT(log, foo, _name)          \
     }

Note that when logging is disabled logging instance and pointer to that instance are not created.

In order to use the instance logging API in a source file, a compile-time log level must be set using LOG_LEVEL_SET.

LOG_LEVEL_SET(CONFIG_FOO_LOG_LEVEL);

void foo_init(foo_object *f)
{
     LOG_INST_INF(f->log, "Initialized.");
}

In order to use the instance logging API in a header file, a compile-time log level must be set using LOG_LEVEL_SET.

static inline void foo_init(foo_object *f)
{
     LOG_LEVEL_SET(CONFIG_FOO_LOG_LEVEL);

     LOG_INST_INF(f->log, "Initialized.");
}

Controlling the logging

Logging can be controlled using API defined in include/zephyr/logging/log_ctrl.h. Logger must be initialized before it can be used. Optionally, user can provide function which returns timestamp value. If not provided, k_cycle_get_32 is used for timestamping. log_process() function is used to trigger processing of one log message (if pending). Function returns true if there is more messages pending.

Following snippet shows how logging can be processed in simple forever loop.

#include <zephyr/log_ctrl.h>

void main(void)
{
     log_init();

     while (1) {
             if (log_process() == false) {
                     /* sleep */
             }
     }
}

If logs are processed from a thread then it is possible to enable a feature which will wake up processing thread when certain amount of log messages are buffered (see CONFIG_LOG_PROCESS_TRIGGER_THRESHOLD). It is also possible to enable internal logging thread (see CONFIG_LOG_PROCESS_THREAD). In that case, logging thread is initialized and log messages are processed implicitly.

Logging panic

In case of error condition system usually can no longer rely on scheduler or interrupts. In that situation deferred log message processing is not an option. Logger controlling API provides a function for entering into panic mode (log_panic()) which should be called in such situation.

When log_panic() is called, _panic_ notification is sent to all active backends. Once all backends are notified, all buffered messages are flushed. Since that moment all logs are processed in a blocking way.

Architecture

Logging consists of 3 main parts:

  • Frontend

  • Core

  • Backends

Log message is generated by a source of logging which can be a module or instance of a module.

Default Frontend

Default frontend is engaged when logging API is called in a source of logging (e.g. LOG_INF) and is responsible for filtering a message (compile and run time), allocating buffer for the message, creating the message and committing that message. Since logging API can be called in an interrupt, frontend is optimized to log the message as fast as possible.

Log message

Log message contains message descriptor (source, domain and level), timestamp, formatted string details (see Cbprintf Packaging) and optional data. Log messages are stored in a continuous block of memory. Memory is allocated from a circular packet buffer (Multi Producer Single Consumer Packet Buffer). It has few consequences:

  • Each message is self-contained, continuous block of memory thus it is suited for copying the message (e.g. for offline processing).

  • Messages must be sequentially freed. Backend processing is synchronous. Backend can make a copy for deferred processing.

Log message has following format:

Message Header

2 bits: MPSC packet buffer header

1 bit: Trace/Log message flag

3 bits: Domain ID

3 bits: Level

10 bits: Cbprintf Package Length

12 bits: Data length

1 bit: Reserved

pointer: Pointer to the source descriptor 1

32 or 64 bits: Timestamp 1

Optional padding 2

Cbprintf

package
(optional)

Header

Arguments

Appended strings

Hexdump data (optional)

Alignment padding (optional)

Footnotes

1(1,2)

Depending on the platform and the timestamp size fields may be swapped.

2

It may be required for cbprintf package alignment

Log message allocation

It may happen that frontend cannot allocate a message. It happens if system is generating more log messages than it can process in certain time frame. There are two strategies to handle that case:

  • No overflow - new log is dropped if space for a message cannot be allocated.

  • Overflow - oldest pending messages are freed, until new message can be allocated. Enabled by CONFIG_LOG_MODE_OVERFLOW. Note that it degrades performance thus it is recommended to adjust buffer size and amount of enabled logs to limit dropping.

Run-time filtering

If run-time filtering is enabled, then for each source of logging a filter structure in RAM is declared. Such filter is using 32 bits divided into ten 3 bit slots. Except slot 0, each slot stores current filter for one backend in the system. Slot 0 (bits 0-2) is used to aggregate maximal filter setting for given source of logging. Aggregate slot determines if log message is created for given entry since it indicates if there is at least one backend expecting that log entry. Backend slots are examined when message is processed by the core to determine if message is accepted by the given backend. Contrary to compile time filtering, binary footprint is increased because logs are compiled in.

In the example below backend 1 is set to receive errors (slot 1) and backend 2 up to info level (slot 2). Slots 3-9 are not used. Aggregated filter (slot 0) is set to info level and up to this level message from that particular source will be buffered.

slot 0

slot 1

slot 2

slot 3

slot 9

INF

ERR

INF

OFF

OFF

Custom Frontend

Custom frontend is enabled using CONFIG_LOG_FRONTEND. Logs are directed to functions declared in include/zephyr/logging/log_frontend.h. If option CONFIG_LOG_FRONTEND_ONLY is enabled then log message is not created and no backend is handled. Otherwise, custom frontend can coexist with backends.

Logging strings

String arguments are handled by Cbprintf Packaging thus no special action is required. Strings which are in read write memory are appended to the log message.

Logging backends

Logging backends are registered using LOG_BACKEND_DEFINE. The macro creates an instance in the dedicated memory section. Backends can be dynamically enabled (log_backend_enable()) and disabled. When Run-time filtering is enabled, log_filter_set() can be used to dynamically change filtering of a module logs for given backend. Module is identified by source ID and domain ID. Source ID can be retrieved if source name is known by iterating through all registered sources.

Logging supports up to 9 concurrent backends. Log message is passed to the each backend in processing phase. Additionally, backend is notified when logging enter panic mode with log_backend_panic(). On that call backend should switch to synchronous, interrupt-less operation or shut down itself if that is not supported. Occasionally, logging may inform backend about number of dropped messages with log_backend_dropped(). Message processing API is version specific.

log_backend_msg2_process() is used for processing message. It is common for standard and hexdump messages because log message hold string with arguments and data. It is also common for deferred and immediate logging.

Message formatting

Logging provides set of function that can be used by the backend to format a message. Helper functions are available in include/zephyr/logging/log_output.h.

Example message formatted using log_output_msg2_process().

[00:00:00.000,274] <info> sample_instance.inst1: logging message

Dictionary-based Logging

Dictionary-based logging, instead of human readable texts, outputs the log messages in binary format. This binary format encodes arguments to formatted strings in their native storage formats which can be more compact than their text equivalents. For statically defined strings (including the format strings and any string arguments), references to the ELF file are encoded instead of the whole strings. A dictionary created at build time contains the mappings between these references and the actual strings. This allows the offline parser to obtain the strings from the dictionary to parse the log messages. This binary format allows a more compact representation of log messages in certain scenarios. However, this requires the use of an offline parser and is not as intuitive to use as text-based log messages.

Note that long double is not supported by Python’s struct module. Therefore, log messages with long double will not display the correct values.

Configuration

Here are kconfig options related to dictionary-based logging:

Usage

When dictionary-based logging is enabled via enabling related logging backends, a JSON database file, named log_dictionary.json, will be created in the build directory. This database file contains information for the parser to correctly parse the log data. Note that this database file only works with the same build, and cannot be used for any other builds.

To use the log parser:

./scripts/logging/dictionary/log_parser.py <build dir>/log_dictionary.json <log data file>

The parser takes two required arguments, where the first one is the full path to the JSON database file, and the second part is the file containing log data. Add an optional argument --hex to the end if the log data file contains hexadecimal characters (e.g. when CONFIG_LOG_BACKEND_UART_OUTPUT_DICTIONARY_HEX=y). This tells the parser to convert the hexadecimal characters to binary before parsing.

Please refer to Dictionary-based Logging Sample on how to use the log parser.

Recommendations

The are following recommendations:

  • Enable CONFIG_LOG_SPEED to slightly speed up deferred logging at the cost of slight increase in memory footprint.

  • Compiler with C11 _Generic keyword support is recommended. Logging performance is significantly degraded without it. See Cbprintf Packaging.

  • When C11 _Generic is used, it is recommended to cast pointer to const char * when it is used with %s format specifier and it points to a constant string.

  • When C11 _Generic is used, it is recommended to cast pointer to char * when it is used with %s format specifier and it points to a transient string.

  • When C11 _Generic is used, it is recommended to cast character pointer to non character pointer (e.g., void *) when it is used with %p format specifier.

LOG_WRN("%s", str);
LOG_WRN("%p", (void *)str);

Benchmark

Benchmark numbers from tests/subsys/logging/log_benchmark performed on qemu_x86. It is a rough comparison to give a general overview.

Feature

Kernel logging

7us 3/11us

User logging

13us

kernel logging with overwrite

10us 3/15us

Logging transient string

42us

Logging transient string from user

50us

Memory utilization 4

518

Memory footprint (test) 5

2k

Memory footprint (application) 6

3.5k

Message footprint 7

47 3/32 bytes

Benchmark details

3(1,2,3)

CONFIG_LOG_SPEED enabled.

4

Number of log messages with various number of arguments that fits in 2048 bytes dedicated for logging.

5

Logging subsystem memory footprint in tests/subsys/logging/log_benchmark where filtering and formatting features are not used.

6

Logging subsystem memory footprint in samples/subsys/logging/logger.

7

Average size of a log message (excluding string) with 2 arguments on Cortex M3

Stack usage

When logging is enabled it impacts stack usage of the context that uses logging API. If stack is optimized it may lead to stack overflow. Stack usage depends on mode and optimization. It also significantly varies between platforms. In general, when CONFIG_LOG_MODE_DEFERRED is used stack usage is smaller since logging is limited to creating and storing log message. When CONFIG_LOG_MODE_IMMEDIATE is used then log message is processed by the backend which includes string formatting. In case of that mode, stack usage will depend on which backends are used.

tests/subsys/logging/log_stack test is used to characterize stack usage depending on mode, optimization and platform used. Test is using only the default backend.

Some of the platforms characterization for log message with two integer arguments listed below:

Platform

Deferred

Deferred (no optimization)

Immediate

Immediate (no optimization)

ARM Cortex-M3

40

152

412

783

x86

12

224

388

796

riscv32

24

208

456

844

xtensa

72

336

504

944

x86_64

32

528

1088

1440

API Reference

Logger API

group log_api

Logger API.

Defines

LOG_ERR(...)

Writes an ERROR level message to the log.

It’s meant to report severe errors, such as those from which it’s not possible to recover.

Parameters
  • ... – A string optionally containing printk valid conversion specifier, followed by as many values as specifiers.

LOG_WRN(...)

Writes a WARNING level message to the log.

It’s meant to register messages related to unusual situations that are not necessarily errors.

Parameters
  • ... – A string optionally containing printk valid conversion specifier, followed by as many values as specifiers.

LOG_INF(...)

Writes an INFO level message to the log.

It’s meant to write generic user oriented messages.

Parameters
  • ... – A string optionally containing printk valid conversion specifier, followed by as many values as specifiers.

LOG_DBG(...)

Writes a DEBUG level message to the log.

It’s meant to write developer oriented information.

Parameters
  • ... – A string optionally containing printk valid conversion specifier, followed by as many values as specifiers.

LOG_PRINTK(...)

Unconditionally print raw log message.

The result is same as if printk was used but it goes through logging infrastructure thus utilizes logging mode, e.g. deferred mode.

Parameters
  • ... – A string optionally containing printk valid conversion specifier, followed by as many values as specifiers.

LOG_INST_ERR(_log_inst, ...)

Writes an ERROR level message associated with the instance to the log.

Message is associated with specific instance of the module which has independent filtering settings (if runtime filtering is enabled) and message prefix (<module_name>.<instance_name>). It’s meant to report severe errors, such as those from which it’s not possible to recover.

Parameters
  • _log_inst – Pointer to the log structure associated with the instance.

  • ... – A string optionally containing printk valid conversion specifier, followed by as many values as specifiers.

LOG_INST_WRN(_log_inst, ...)

Writes a WARNING level message associated with the instance to the log.

Message is associated with specific instance of the module which has independent filtering settings (if runtime filtering is enabled) and message prefix (<module_name>.<instance_name>). It’s meant to register messages related to unusual situations that are not necessarily errors.

Parameters
  • _log_inst – Pointer to the log structure associated with the instance.

  • ... – A string optionally containing printk valid conversion specifier, followed by as many values as specifiers.

LOG_INST_INF(_log_inst, ...)

Writes an INFO level message associated with the instance to the log.

Message is associated with specific instance of the module which has independent filtering settings (if runtime filtering is enabled) and message prefix (<module_name>.<instance_name>). It’s meant to write generic user oriented messages.

Parameters
  • _log_inst – Pointer to the log structure associated with the instance.

  • ... – A string optionally containing printk valid conversion specifier, followed by as many values as specifiers.

LOG_INST_DBG(_log_inst, ...)

Writes a DEBUG level message associated with the instance to the log.

Message is associated with specific instance of the module which has independent filtering settings (if runtime filtering is enabled) and message prefix (<module_name>.<instance_name>). It’s meant to write developer oriented information.

Parameters
  • _log_inst – Pointer to the log structure associated with the instance.

  • ... – A string optionally containing printk valid conversion specifier, followed by as many values as specifiers.

LOG_HEXDUMP_ERR(_data, _length, _str)

Writes an ERROR level hexdump message to the log.

It’s meant to report severe errors, such as those from which it’s not possible to recover.

Parameters
  • _data – Pointer to the data to be logged.

  • _length – Length of data (in bytes).

  • _str – Persistent, raw string.

LOG_HEXDUMP_WRN(_data, _length, _str)

Writes a WARNING level message to the log.

It’s meant to register messages related to unusual situations that are not necessarily errors.

Parameters
  • _data – Pointer to the data to be logged.

  • _length – Length of data (in bytes).

  • _str – Persistent, raw string.

LOG_HEXDUMP_INF(_data, _length, _str)

Writes an INFO level message to the log.

It’s meant to write generic user oriented messages.

Parameters
  • _data – Pointer to the data to be logged.

  • _length – Length of data (in bytes).

  • _str – Persistent, raw string.

LOG_HEXDUMP_DBG(_data, _length, _str)

Writes a DEBUG level message to the log.

It’s meant to write developer oriented information.

Parameters
  • _data – Pointer to the data to be logged.

  • _length – Length of data (in bytes).

  • _str – Persistent, raw string.

LOG_INST_HEXDUMP_ERR(_log_inst, _data, _length, _str)

Writes an ERROR hexdump message associated with the instance to the log.

Message is associated with specific instance of the module which has independent filtering settings (if runtime filtering is enabled) and message prefix (<module_name>.<instance_name>). It’s meant to report severe errors, such as those from which it’s not possible to recover.

Parameters
  • _log_inst – Pointer to the log structure associated with the instance.

  • _data – Pointer to the data to be logged.

  • _length – Length of data (in bytes).

  • _str – Persistent, raw string.

LOG_INST_HEXDUMP_WRN(_log_inst, _data, _length, _str)

Writes a WARNING level hexdump message associated with the instance to the log.

It’s meant to register messages related to unusual situations that are not necessarily errors.

Parameters
  • _log_inst – Pointer to the log structure associated with the instance.

  • _data – Pointer to the data to be logged.

  • _length – Length of data (in bytes).

  • _str – Persistent, raw string.

LOG_INST_HEXDUMP_INF(_log_inst, _data, _length, _str)

Writes an INFO level hexdump message associated with the instance to the log.

It’s meant to write generic user oriented messages.

Parameters
  • _log_inst – Pointer to the log structure associated with the instance.

  • _data – Pointer to the data to be logged.

  • _length – Length of data (in bytes).

  • _str – Persistent, raw string.

LOG_INST_HEXDUMP_DBG(_log_inst, _data, _length, _str)

Writes a DEBUG level hexdump message associated with the instance to the log.

It’s meant to write developer oriented information.

Parameters
  • _log_inst – Pointer to the log structure associated with the instance.

  • _data – Pointer to the data to be logged.

  • _length – Length of data (in bytes).

  • _str – Persistent, raw string.

LOG_MODULE_REGISTER(...)

Create module-specific state and register the module with Logger.

This macro normally must be used after including <zephyr/logging/log.h> to complete the initialization of the module.

Module registration can be skipped in two cases:

  • The module consists of more than one file, and another file invokes this macro. (LOG_MODULE_DECLARE() should be used instead in all of the module’s other files.)

  • Instance logging is used and there is no need to create module entry. In that case LOG_LEVEL_SET() should be used to set log level used within the file.

Macro accepts one or two parameters:

  • module name

  • optional log level. If not provided then default log level is used in the file.

Example usage:

Note

The module’s state is defined, and the module is registered, only if LOG_LEVEL for the current source file is non-zero or it is not defined and CONFIG_LOG_DEFAULT_LEVEL is non-zero. In other cases, this macro has no effect.

LOG_MODULE_DECLARE(...)

Macro for declaring a log module (not registering it).

Modules which are split up over multiple files must have exactly one file use LOG_MODULE_REGISTER() to create module-specific state and register the module with the logger core.

The other files in the module should use this macro instead to declare that same state. (Otherwise, LOG_INF() etc. will not be able to refer to module-specific state variables.)

Macro accepts one or two parameters:

  • module name

  • optional log level. If not provided then default log level is used in the file.

Example usage:

Note

The module’s state is declared only if LOG_LEVEL for the current source file is non-zero or it is not defined and CONFIG_LOG_DEFAULT_LEVEL is non-zero. In other cases, this macro has no effect.

LOG_LEVEL_SET(level)

Macro for setting log level in the file or function where instance logging API is used.

Parameters
  • level – Level used in file or in function.

Logger control

group log_ctrl

Logger control API.

Defines

LOG_CORE_INIT()
LOG_INIT()
LOG_PANIC()
LOG_PROCESS()

Typedefs

typedef log_timestamp_t (*log_timestamp_get_t)(void)

Functions

void log_core_init(void)

Function system initialization of the logger.

Function is called during start up to allow logging before user can explicitly initialize the logger.

void log_init(void)

Function for user initialization of the logger.

void log_thread_set(k_tid_t process_tid)

Function for providing thread which is processing logs.

See CONFIG_LOG_PROCESS_TRIGGER_THRESHOLD.

Note

Function has asserts and has no effect when CONFIG_LOG_PROCESS_THREAD is set.

Parameters
  • process_tid – Process thread id. Used to wake up the thread.

int log_set_timestamp_func(log_timestamp_get_t timestamp_getter, uint32_t freq)

Function for providing timestamp function.

Parameters
  • timestamp_getter – Timestamp function.

  • freq – Timestamping frequency.

Returns

0 on success or error.

void log_panic(void)

Switch the logger subsystem to the panic mode.

Returns immediately if the logger is already in the panic mode.

On panic the logger subsystem informs all backends about panic mode. Backends must switch to blocking mode or halt. All pending logs are flushed after switching to panic mode. In panic mode, all log messages must be processed in the context of the call.

bool log_process(void)

Process one pending log message.

Return values
  • true – There is more messages pending to be processed.

  • false – No messages pending.

uint32_t log_buffered_cnt(void)

Return number of buffered log messages.

Returns

Number of currently buffered log messages.

uint32_t log_src_cnt_get(uint32_t domain_id)

Get number of independent logger sources (modules and instances)

Parameters
  • domain_id – Domain ID.

Returns

Number of sources.

const char *log_source_name_get(uint32_t domain_id, uint32_t source_id)

Get name of the source (module or instance).

Parameters
  • domain_id – Domain ID.

  • source_id – Source ID.

Returns

Source name or NULL if invalid arguments.

const char *log_domain_name_get(uint32_t domain_id)

Get name of the domain.

Parameters
  • domain_id – Domain ID.

Returns

Domain name.

int log_source_id_get(const char *name)

Function for finding source ID based on source name.

Parameters
  • name – Source name

Returns

Source ID or negative number when source ID is not found.

uint32_t log_filter_get(struct log_backend const *const backend, uint32_t domain_id, int16_t source_id, bool runtime)

Get source filter for the provided backend.

Parameters
  • backend – Backend instance.

  • domain_id – ID of the domain.

  • source_id – Source (module or instance) ID.

  • runtime – True for runtime filter or false for compiled in.

Returns

Severity level.

uint32_t log_filter_set(struct log_backend const *const backend, uint32_t domain_id, int16_t source_id, uint32_t level)

Set filter on given source for the provided backend.

Parameters
  • backend – Backend instance. NULL for all backends.

  • domain_id – ID of the domain.

  • source_id – Source (module or instance) ID.

  • level – Severity level.

Returns

Actual level set which may be limited by compiled level. If filter was set for all backends then maximal level that was set is returned.

void log_backend_enable(struct log_backend const *const backend, void *ctx, uint32_t level)

Enable backend with initial maximum filtering level.

Parameters
  • backend – Backend instance.

  • ctx – User context.

  • level – Severity level.

void log_backend_disable(struct log_backend const *const backend)

Disable backend.

Parameters
  • backend – Backend instance.

const struct log_backend *log_backend_get_by_name(const char *backend_name)

Get backend by name.

Parameters
  • backend_name[in] Name of the backend as defined by the LOG_BACKEND_DEFINE.

Return values

Pointer – to the backend instance if found, NULL if backend is not found.

const struct log_backend *log_format_set_all_active_backends(size_t log_type)

Sets logging format for all active backends.

Parameters
  • log_type – Log format.

Return values

Pointer – to the last backend that failed, NULL for success.

uint32_t log_get_strdup_pool_current_utilization(void)

Get current number of allocated buffers for string duplicates.

uint32_t log_get_strdup_pool_utilization(void)

Get maximal number of simultaneously allocated buffers for string duplicates.

Value can be used to determine pool size.

uint32_t log_get_strdup_longest_string(void)

Get length of the longest string duplicated.

Value can be used to determine buffer size in the string duplicates pool.

static inline bool log_data_pending(void)

Check if there is pending data to be processed by the logging subsystem.

Function can be used to determine if all logs have been flushed. Function returns false when deferred mode is not enabled.

Return values
  • true – There is pending data.

  • false – No pending data to process.

int log_set_tag(const char *tag)

Configure tag used to prefix each message.

Parameters
  • tag – Tag.

Return values
  • 0 – on successful operation.

  • -ENOTSUP – if feature is disabled.

  • -ENOMEM – if string is longer than the buffer capacity. Tag will be trimmed.

int log_mem_get_usage(uint32_t *buf_size, uint32_t *usage)

Get current memory usage.

Parameters
  • buf_size[out] Capacity of the buffer used for storing log messages.

  • usage[out] Number of bytes currently containing pending log messages.

Return values
  • -EINVAL – if logging mode does not use the buffer.

  • 0 – successfully collected usage data.

int log_mem_get_max_usage(uint32_t *max)

Get maximum memory usage.

Requires CONFIG_LOG_MEM_UTILIZATION option.

Parameters
  • max[out] Maximum number of bytes used for pending log messages.

Return values
  • -EINVAL – if logging mode does not use the buffer.

  • -ENOTSUP – if instrumentation is not enabled. not been enabled.

  • 0 – successfully collected usage data.

Log message

group log_msg

Log message API.

Defines

LOG_MSG2_GENERIC_HDR

Functions

static inline uint32_t log_msg_get_total_wlen(const struct log_msg_desc desc)

Get total length (in 32 bit words) of a log message.

Parameters
  • desc – Log message descriptor.

Returns

Length.

static inline uint32_t log_msg_generic_get_wlen(const union mpsc_pbuf_generic *item)

Get length of the log item.

Parameters
  • item – Item.

Returns

Length in 32 bit words.

static inline uint8_t log_msg_get_domain(struct log_msg *msg)

Get log message domain ID.

Parameters
  • msg – Log message.

Returns

Domain ID

static inline uint8_t log_msg_get_level(struct log_msg *msg)

Get log message level.

Parameters
  • msg – Log message.

Returns

Log level.

static inline const void *log_msg_get_source(struct log_msg *msg)

Get message source data.

Parameters
  • msg – Log message.

Returns

Pointer to the source data.

static inline log_timestamp_t log_msg_get_timestamp(struct log_msg *msg)

Get timestamp.

Parameters
  • msg – Log message.

Returns

Timestamp.

static inline uint8_t *log_msg_get_data(struct log_msg *msg, size_t *len)

Get data buffer.

Parameters
  • msg – log message.

  • len – location where data length is written.

Returns

pointer to the data buffer.

static inline uint8_t *log_msg_get_package(struct log_msg *msg, size_t *len)

Get string package.

Parameters
  • msg – log message.

  • len – location where string package length is written.

Returns

pointer to the package.

struct log_msg_desc
#include <log_msg.h>
union log_msg_source
#include <log_msg.h>

Public Members

const struct log_source_const_data *fixed
struct log_source_dynamic_data *dynamic
void *raw
struct log_msg_hdr
#include <log_msg.h>
struct log_msg
#include <log_msg.h>
struct log_msg_generic_hdr
#include <log_msg.h>
union log_msg_generic
#include <log_msg.h>

Public Members

union mpsc_pbuf_generic buf
struct log_msg_generic_hdr generic
struct log_msg log

Logger backend interface

group log_backend

Logger backend interface.

Defines

LOG_BACKEND_DEFINE(_name, _api, _autostart, ...)

Macro for creating a logger backend instance.

Parameters
  • _name – Name of the backend instance.

  • _api – Logger backend API.

  • _autostart – If true backend is initialized and activated together with the logger subsystem.

  • ... – Optional context.

Enums

enum log_backend_evt

Backend events.

Values:

enumerator LOG_BACKEND_EVT_PROCESS_THREAD_DONE

Event when process thread finishes processing.

This event is emitted when the process thread finishes processing pending log messages.

Note

This is not emitted when there are no pending log messages being processed.

Note

Deferred mode only.

enumerator LOG_BACKEND_EVT_MAX

Maximum number of backend events.

Functions

static inline void log_backend_init(const struct log_backend *const backend)

Initialize or initiate the logging backend.

If backend initialization takes longer time it could block logging thread if backend is autostarted. That is because all backends are initilized in the context of the logging thread. In that case, backend shall provide function for polling for readiness (log_backend_is_ready).

Parameters
  • backend[in] Pointer to the backend instance.

static inline int log_backend_is_ready(const struct log_backend *const backend)

Poll for backend readiness.

If backend is ready immediately after initialization then backend may not provide this function.

Parameters
  • backend[in] Pointer to the backend instance.

Return values
  • 0 – if backend is ready.

  • -EBUSY – if backend is not yet ready.

static inline void log_backend_msg_process(const struct log_backend *const backend, union log_msg_generic *msg)

Process message.

Function is used in deferred and immediate mode. On return, message content is processed by the backend and memory can be freed.

Parameters
  • backend[in] Pointer to the backend instance.

  • msg[in] Pointer to message with log entry.

static inline void log_backend_dropped(const struct log_backend *const backend, uint32_t cnt)

Notify backend about dropped log messages.

Function is optional.

Parameters
  • backend[in] Pointer to the backend instance.

  • cnt[in] Number of dropped logs since last notification.

static inline void log_backend_panic(const struct log_backend *const backend)

Reconfigure backend to panic mode.

Parameters
  • backend[in] Pointer to the backend instance.

static inline void log_backend_id_set(const struct log_backend *const backend, uint8_t id)

Set backend id.

Note

It is used internally by the logger.

Parameters
  • backend – Pointer to the backend instance.

  • id – ID.

static inline uint8_t log_backend_id_get(const struct log_backend *const backend)

Get backend id.

Note

It is used internally by the logger.

Parameters
  • backend[in] Pointer to the backend instance.

Returns

Id.

static inline const struct log_backend *log_backend_get(uint32_t idx)

Get backend.

Parameters
  • idx[in] Pointer to the backend instance.

Returns

Pointer to the backend instance.

static inline int log_backend_count_get(void)

Get number of backends.

Returns

Number of backends.

static inline void log_backend_activate(const struct log_backend *const backend, void *ctx)

Activate backend.

Parameters
  • backend[in] Pointer to the backend instance.

  • ctx[in] User context.

static inline void log_backend_deactivate(const struct log_backend *const backend)

Deactivate backend.

Parameters
  • backend[in] Pointer to the backend instance.

static inline bool log_backend_is_active(const struct log_backend *const backend)

Check state of the backend.

Parameters
  • backend[in] Pointer to the backend instance.

Returns

True if backend is active, false otherwise.

static inline int log_backend_format_set(const struct log_backend *backend, uint32_t log_type)

Set logging format.

Parameters
  • backend – Pointer to the backend instance.

  • log_type – Log format.

Return values
  • -ENOTSUP – If the backend does not support changing format types.

  • -EINVAL – If the input is invalid.

  • 0 – for success.

static inline void log_backend_notify(const struct log_backend *const backend, enum log_backend_evt event, union log_backend_evt_arg *arg)

Notify a backend of an event.

Parameters
  • backend – Pointer to the backend instance.

  • event – Event to be notified.

  • arg – Pointer to the argument(s).

union log_backend_evt_arg
#include <log_backend.h>

Argument(s) for backend events.

Public Members

void *raw

Unspecified argument(s).

struct log_backend_api
#include <log_backend.h>

Logger backend API.

struct log_backend_control_block
#include <log_backend.h>

Logger backend control block.

struct log_backend
#include <log_backend.h>

Logger backend structure.

Logger output formatting

group log_output

Log output API.

Defines

LOG_OUTPUT_TEXT

Supported backend logging format types for use with log_format_set() API to switch log format at runtime.

LOG_OUTPUT_SYST
LOG_OUTPUT_DICT
LOG_OUTPUT_DEFINE(_name, _func, _buf, _size)

Create log_output instance.

Parameters
  • _name – Instance name.

  • _func – Function for processing output data.

  • _buf – Pointer to the output buffer.

  • _size – Size of the output buffer.

Typedefs

typedef int (*log_output_func_t)(uint8_t *buf, size_t size, void *ctx)

Prototype of the function processing output data.

Note

If the log output function cannot process all of the data, it is its responsibility to mark them as dropped or discarded by returning the corresponding number of bytes dropped or discarded to the caller.

Param buf

The buffer data.

Param size

The buffer size.

Param ctx

User context.

Return

Number of bytes processed, dropped or discarded.

typedef void (*log_format_func_t)(const struct log_output *output, struct log_msg *msg, uint32_t flags)

Typedef of the function pointer table “format_table”.

Param output

Pointer to log_output struct.

Param msg

Pointer to log_msg struct.

Param flags

Flags used for text formatting options.

Return

Function pointer based on Kconfigs defined for backends.

Functions

log_format_func_t log_format_func_t_get(uint32_t log_type)

Declaration of the get routine for function pointer table format_table.

void log_output_msg_process(const struct log_output *log_output, struct log_msg *msg, uint32_t flags)

Process log messages v2 to readable strings.

Function is using provided context with the buffer and output function to process formatted string and output the data.

Parameters
  • log_output – Pointer to the log output instance.

  • msg – Log message.

  • flags – Optional flags. See Log output formatting flags..

void log_output_process(const struct log_output *log_output, log_timestamp_t timestamp, const char *domain, const char *source, uint8_t level, const uint8_t *package, const uint8_t *data, size_t data_len, uint32_t flags)

Process input data to a readable string.

Parameters
  • log_output – Pointer to the log output instance.

  • timestamp – Timestamp.

  • domain – Domain name string. Can be NULL.

  • source – Source name string. Can be NULL.

  • level – Criticality level.

  • package – Cbprintf package with a logging message string.

  • data – Data passed to hexdump API. Can bu NULL.

  • data_len – Data length.

  • flags – Formatting flags. See Log output formatting flags..

void log_output_msg_syst_process(const struct log_output *log_output, struct log_msg *msg, uint32_t flags)

Process log messages v2 to SYS-T format.

Function is using provided context with the buffer and output function to process formatted string and output the data in sys-t log output format.

Parameters
  • log_output – Pointer to the log output instance.

  • msg – Log message.

  • flags – Optional flags. See Log output formatting flags..

void log_output_dropped_process(const struct log_output *output, uint32_t cnt)

Process dropped messages indication.

Function prints error message indicating lost log messages.

Parameters
  • output – Pointer to the log output instance.

  • cnt – Number of dropped messages.

void log_output_flush(const struct log_output *output)

Flush output buffer.

Parameters
  • output – Pointer to the log output instance.

static inline void log_output_ctx_set(const struct log_output *output, void *ctx)

Function for setting user context passed to the output function.

Parameters
  • output – Pointer to the log output instance.

  • ctx – User context.

static inline void log_output_hostname_set(const struct log_output *output, const char *hostname)

Function for setting hostname of this device.

Parameters
  • output – Pointer to the log output instance.

  • hostname – Hostname of this device

void log_output_timestamp_freq_set(uint32_t freq)

Set timestamp frequency.

Parameters
  • freq – Frequency in Hz.

uint64_t log_output_timestamp_to_us(uint32_t timestamp)

Convert timestamp of the message to us.

Parameters
  • timestamp – Message timestamp

Returns

Timestamp value in us.

struct log_output_control_block
#include <log_output.h>
struct log_output
#include <log_output.h>

Log_output instance structure.