atmel,sam-tc

Description

Atmel SAM Timer Counter (TC) node

Properties

Properties not inherited from the base binding file.

Name	Type	Details
`peripheral-id`	`array`	peripheral ID This property is required.
`channel`	`int`	Timer / Counter channel to use, channel 0 is the default. Valid range: 0 - 2
`clk`	`int`	Clock source selection as defined by TCCLKS bit-field of TC_CMR register. Consult the datasheet for the details.
`nodivclk`	`boolean`	If set to true the `clk` property is ignored. Instead the TC module is driven directly via MCLK. Only supported on sam4e, same70, same70b, samv71, samv71b SoC series.
`reg-cmr`	`int`	Alternate value of the CMR (Channel Mode Register) register. If specified this value will be written to the register during driver instance initialization instead of the default. It can be used to configure the timer / counter in the custom mode. Together with other properties like channel-num, pinctrl-0 this allows e.g. to configure the driver to count events generated on the TIOA, TIOB signal connected to the external pin.
`reg-rc`	`int`	Register C compare/match value. RC can be used as compare/match unit for an specific timer unit. Their use depends on how timer channel is configured,see reg-cmr. It can be used as trigger for both input capture or counter mode, or even as event source. The RC register behavior is SoC dependent. For more information and use cases, check SoC datasheet and application notes.
`pinctrl-0`	`phandles`	PIO pin configuration for Timer Counter signals. We expect that the phandles will reference pinctrl nodes. These nodes will have a nodelabel that matches the Atmel SoC HAL defines and be of the form p<port><pin><periph>_<inst>_<signal>. For example the TC0 on SAME7x would be pinctrl-0 = <&pa0b_tc0_tioa0 &pa1b_tc0_tiob0>;

Properties inherited from the base binding file, which defines common properties that may be set on many nodes. Not all of these may apply to the “atmel,sam-tc” compatible.

Name	Type	Details
`reg`	`array`	register space This property is required. See Important properties for more information.
`interrupts`	`array`	interrupts for device This property is required. See Important properties for more information.
`label`	`string`	Human readable string describing the device (used as device_get_binding() argument) This property is required. See Important properties for more information.
`status`	`string`	indicates the operational status of a device Legal values: `'ok'`, `'okay'`, `'disabled'`, `'reserved'`, `'fail'`, `'fail-sss'` See Important properties for more information.
`compatible`	`string-array`	compatible strings This property is required. See Important properties for more information.
`reg-names`	`string-array`	name of each register space
`interrupts-extended`	`compound`	extended interrupt specifier for device
`interrupt-names`	`string-array`	name of each interrupt
`interrupt-parent`	`phandle`	phandle to interrupt controller node
`clocks`	`phandle-array`	Clock gate information
`clock-names`	`string-array`	name of each clock
`#address-cells`	`int`	number of address cells in reg property
`#size-cells`	`int`	number of size cells in reg property
`dmas`	`phandle-array`	DMA channels specifiers
`dma-names`	`string-array`	Provided names of DMA channel specifiers
`io-channels`	`phandle-array`	IO channels specifiers
`io-channel-names`	`string-array`	Provided names of IO channel specifiers
`mboxes`	`phandle-array`	mailbox / IPM channels specifiers
`mbox-names`	`string-array`	Provided names of mailbox / IPM channel specifiers
`wakeup-source`	`boolean`	Property to identify that a device can be used as wake up source. When this property is provided a specific flag is set into the device that tells the system that the device is capable of wake up the system. Wake up capable devices are disabled (interruptions will not wake up the system) by default but they can be enabled at runtime if necessary.
`power-domain`	`phandle`	Power domain the device belongs to. The device will be notified when the power domain it belongs to is either suspended or resumed.