st,stm32-temp

Description

STM32 family TEMP node

Properties

Properties not inherited from the base binding file.

Name	Type	Details
`avgslope`	`int`	Average slope of T-V chart (in mV/C x10) according to datasheet "Electrical characteristics/Operating conditions" STM32F1 Table 5.3.19 (min 4 mV/C, max 4.6, default 4.3) STM32F4 Table 6.3.21 default 2.5 Default value: `25`
`v25`	`int`	Voltage of temperature sensor at 25C in mV according to datasheet "Electrical characteristics/Operating conditions" STM32F1 Table 5.3.19 (min 1340, max 1520, default 1430) STM32F4 Table 6.3.21 default 760 Default value: `760`
`ntc`	`boolean`	Negative Temperature Coefficient. True if STM32F1
`ts-voltage-mv`	`int`	Temperature sensor voltage in millivolts Default value: `3300`

Properties inherited from the base binding file, which defines common properties that may be set on many nodes. Not all of these may apply to the “st,stm32-temp” compatible.

Name	Type	Details
`status`	`string`	indicates the operational status of a device Legal values: `'ok'`, `'okay'`, `'disabled'`, `'reserved'`, `'fail'`, `'fail-sss'` See Important properties for more information.
`compatible`	`string-array`	compatible strings This property is required. See Important properties for more information.
`reg`	`array`	register space See Important properties for more information.
`reg-names`	`string-array`	name of each register space
`interrupts`	`array`	interrupts for device See Important properties for more information.
`interrupts-extended`	`compound`	extended interrupt specifier for device
`interrupt-names`	`string-array`	name of each interrupt
`interrupt-parent`	`phandle`	phandle to interrupt controller node
`label`	`string`	Human readable string describing the device (used as device_get_binding() argument) This property is required. See Important properties for more information.
`clocks`	`phandle-array`	Clock gate information
`clock-names`	`string-array`	name of each clock
`#address-cells`	`int`	number of address cells in reg property
`#size-cells`	`int`	number of size cells in reg property
`dmas`	`phandle-array`	DMA channels specifiers
`dma-names`	`string-array`	Provided names of DMA channel specifiers
`io-channels`	`phandle-array`	IO channels specifiers This property is required.
`io-channel-names`	`string-array`	Provided names of IO channel specifiers
`mboxes`	`phandle-array`	mailbox / IPM channels specifiers
`mbox-names`	`string-array`	Provided names of mailbox / IPM channel specifiers
`wakeup-source`	`boolean`	Property to identify that a device can be used as wake up source. When this property is provided a specific flag is set into the device that tells the system that the device is capable of wake up the system. Wake up capable devices are disabled (interruptions will not wake up the system) by default but they can be enabled at runtime if necessary.
`power-domain`	`phandle`	Power domain the device belongs to. The device will be notified when the power domain it belongs to is either suspended or resumed.