nrf_cc3xx_mbedcrypto library

The nrf_cc3xx_mbedcrypto library is software library to interface with the Arm CryptoCell CC310 hardware accelerator that is available on the nRF52840 SoC and the nRF9160 SiP. The library adds hardware support for selected cryptographic algorithms.

Integration with Mbed TLS

The nrf_cc3xx_mbedcrypto library provides low-level integration with the Mbed TLS version provided in nRF Connect SDK. Some of the APIs expressed in this library use the Mbed TLS “alternative implementation” abstraction layer.

Note

It is not recommended to link to this library directly. Use the Nordic Security Module.

Supported cryptographic algorithms

The following tables show the supported cryptographic algorithms in the Arm CryptoCell CC310 hardware accelerator in nRF52840 and nRF9160, as well as the current state of support in the nrf_cc3xx_mbedcrypto library.

Note

If no Mbed TLS support is listed in limitations, it indicates that the hardware supports it, but it is not exposed in an API that works with Mbed TLS.

AES - Advanced Encryption Standard

Cipher

Limitations

CTR

128-bit

CBC

128-bit

OFB

128-bit, no Mbed TLS support

CFB

128-bit, no Mbed TLS support

CMAC

128-bit

AEAD - Authenticated Encryption with Associated Data

Cipher

Limitations

CCM/CCM*

128-bit

ChaCha-Poly

128-bit

Diffie-Hellman-Merkel

Supported for key sizes <= 2048 bits.

RSA

PKCS#1 v1.5 and v2.1 is supported for signing and encryption including:

  • RSASSA-PSS

  • RSAES-OEAP

Supported for key sizes <= 2048 bits.

Secure Hash

SHA-1 and SHA-256 is supported.

ECDSA and ECDH

ECDSA and ECDH is supported for the following elliptic curves:

SEC 2/NIST 186-4:

  • secp160r1

  • secp192r1

  • secp224r1

  • secp256r1

  • secp384r1

  • secp521r1

Koblitz:

  • secp160k1

  • secp192k1

  • secp224k1

  • secp256k1

Edwards/Montgommery:

  • Ed25519

  • Curve25519

Additional items in mbedtls_extra

These mbedtls_extra algorithms are supported, but are not in the Mbed TLS API.

  • AES key wrap functions

  • ECIES

  • HKDF

  • SRP, up to 3072 bits

Using the library

Providing platform specific calloc/free

Just like Mbed TLS, this library calls calloc() and free() for memory management.

The calloc() and free() functions can be changed with the following API:

Setting custom calloc/free
int ret;

ret = mbedtls_platform_set_calloc_free(calloc_fn, free_fn);
if (ret != 0) {
        /* Failed to set the alternative calloc/free */
        return ret;
}

This API must be called prior to calling mbedtls_platform_setup(). Otherwise, the library will default to use the clib functions calloc() and free().

PSA driver integration

Starting from version 0.9.13, the nrf_oberon library contains a companion library that provides PSA driver integration for select features. This must be used with the Nordic Security Module.

Supported features

The supported features for the PSA driver companion library are:

  • AES CTR/CBC/ECB/CCM (192/256 bit keys are only supported by CryptoCell 312)

  • AES GCM (only supported by CryptoCell 312)

  • ChaCha20 and Poly1305 (256 bit keys only)

  • ECDSA (secp224r1, secp256r1 and secp384r1 only)

  • ECDH

  • RSA (PKCS1V15 with 1024 bits keys only)

  • HMAC

  • CMAC (192/256 bit keys are only supported by CryptoCell 312)

  • HKDF

  • SHA-1

  • SHA-224

  • SHA-256

Initializing the library

The library requires initialization before use. You can initialize it by calling the mbedtls_platform_setup()/mbedtls_platform_teardown() functions.

Initializing the library
int ret;
static mbedtls_platform_context platform_context = {0};

ret = mbedtls_platform_setup(&platform_context);
if (ret != 0) {
        /* Failed to initialize nrf_cc3xx_mbedcrypto platform */
        return ret,
}

Note

There is no need to enable/disable the CC310 hardware by writing to the NRF_CRYPTOCELL->ENABLE and NRF_CRYPTOCELL_S->ENABLE registers. This happens automatically when calling APIs in this library.

RNG initialization memory management

The nrf_cc3xx_mbedcrypto library allocates a work buffer during RNG initialization using calloc() and free(). The size of this work buffer is 6112 bytes. An alternative to allocating this on the heap is to provide a reference to a static variable inside the mbedtls_platform_context structure type.

Preventing heap-allocation for RNG initialization
int ret;
static mbedtls_rng_workbuf_internal rng_workbuf;
static mbedtls_platform_context platform_context = {0};
platform_context.p_rnd_workbuf = &rng_workbuf;

ret = mbedtls_platform_setup(&platform_context);
if (ret != 0) {
        /* Failed to initialize nrf_cc3xx_mbedcrypto platform */
        return ret,
}

Usage restrictions

The library can not be used in the non-secure domain of an application that uses ARM TrustZone.

The hardware can only process one request at a time. Therefore, this library has used mutexes to make the library thread-safe.

API documentation

nRF CC3XX mbedcrypto library