st,stm32-ucpd

Description

ST STM32 family USB Type-C / Power Delivery. The default values were
taken from the LL_UCPD_StructInit function defined in the HAL.

Properties

Properties not inherited from the base binding file.

Name	Type	Details
`psc-ucpdclk`	`int`	Determines the division ratio of a kernel clock pre-scaler producing UCPD peripheral clock (ucpd_clk). It is recommended to use the pre-scaler so as to set the ucpd_clk frequency in the range from 6 to 9 MHz. Default value: `2` Legal values: `1`, `2`, `4`, `8`, `16`, `32`, `64`, `128`
`ifrgap`	`int`	Determines the division ratio of a ucpd_clk divider producing inter-frame gap timer clock (tInterFrameGap). The division ratio 15 is to apply for Tx clock at the USB PD 2.0 specification nominal value. Valid range: 2 - 32 Default value: `17`
`transwin`	`int`	Determines the division ratio of a hbit_clk divider producing tTransitionWindow interval. Valid range: 2 - 32 Default value: `8`
`hbitclkdiv`	`int`	Determines the division ratio of a ucpd_clk divider producing half-bit clock (hbit_clk) Valid range: 1 - 64 Default value: `14`

Properties inherited from the base binding file, which defines common properties that may be set on many nodes. Not all of these may apply to the “st,stm32-ucpd” compatible.

Name	Type	Details
`label`	`string`	Human readable string describing the device (used as device_get_binding() argument) This property is required. See Important properties for more information.
`reg`	`array`	register space This property is required. See Important properties for more information.
`clocks`	`phandle-array`	Clock gate information This property is required.
`interrupts`	`array`	interrupts for device This property is required. See Important properties for more information.
`status`	`string`	indicates the operational status of a device Legal values: `'ok'`, `'okay'`, `'disabled'`, `'reserved'`, `'fail'`, `'fail-sss'` See Important properties for more information.
`compatible`	`string-array`	compatible strings This property is required. See Important properties for more information.
`reg-names`	`string-array`	name of each register space
`interrupts-extended`	`compound`	extended interrupt specifier for device
`interrupt-names`	`string-array`	name of each interrupt
`interrupt-parent`	`phandle`	phandle to interrupt controller node
`clock-names`	`string-array`	name of each clock
`#address-cells`	`int`	number of address cells in reg property
`#size-cells`	`int`	number of size cells in reg property
`dmas`	`phandle-array`	DMA channels specifiers
`dma-names`	`string-array`	Provided names of DMA channel specifiers
`io-channels`	`phandle-array`	IO channels specifiers
`io-channel-names`	`string-array`	Provided names of IO channel specifiers
`mboxes`	`phandle-array`	mailbox / IPM channels specifiers
`mbox-names`	`string-array`	Provided names of mailbox / IPM channel specifiers
`wakeup-source`	`boolean`	Property to identify that a device can be used as wake up source. When this property is provided a specific flag is set into the device that tells the system that the device is capable of wake up the system. Wake up capable devices are disabled (interruptions will not wake up the system) by default but they can be enabled at runtime if necessary.