st,stm32-qspi

Description

These nodes are “qspi” bus nodes.

STM32 QSPI device representation. A stm32 quadspi node would typically
looks to this:

    &quadspi {
        pinctrl-0 = <&quadspi_clk_pe10 &quadspi_ncs_pe11
                     &quadspi_bk1_io0_pe12 &quadspi_bk1_io1_pe13
                     &quadspi_bk1_io2_pe14 &quadspi_bk1_io3_pe15>;

        dmas = <&dma1 5 5 0x0000 0x03>;
        dma-names = "tx_rx";

        status = "okay";
    };

Properties

Properties not inherited from the base binding file.

Name	Type	Details
`pinctrl-0`	`phandles`	Pin configuration/s for the first state. Content is specific to the selected pin controller driver implementation. This property is required.
`pinctrl-names`	`string-array`	Names for the provided states. The number of names needs to match the number of states. This property is required.
`flash-id`	`int`	FLash ID number. This number, if defined, helps to select the right QSPI GPIO banks (defined as 'quadspi_bk[12]' in pinctrl property) to communicate with flash memory. For example flash-id = <2>;
`pinctrl-1`	`phandles`	Pin configuration/s for the second state. See pinctrl-0.
`pinctrl-2`	`phandles`	Pin configuration/s for the third state. See pinctrl-0.
`pinctrl-3`	`phandles`	Pin configuration/s for the fourth state. See pinctrl-0.
`pinctrl-4`	`phandles`	Pin configuration/s for the fifth state. See pinctrl-0.

Properties inherited from the base binding file, which defines common properties that may be set on many nodes. Not all of these may apply to the “st,stm32-qspi” compatible.

Name	Type	Details
`reg`	`array`	register space This property is required. See Important properties for more information.
`interrupts`	`array`	interrupts for device This property is required. See Important properties for more information.
`dmas`	`phandle-array`	Optional DMA channel specifier. If DMA should be used, specifier should hold a phandle reference to the dma controller, the channel number, the slot number, channel configuration and finally features. For example dmas for TX/RX on QSPI dmas = <&dma1 5 5 0x0000 0x03>;
`dma-names`	`string-array`	DMA channel name. If DMA should be used, expected value is "tx_rx". For example dma-names = "tx_rx";
`status`	`string`	indicates the operational status of a device Legal values: `'ok'`, `'okay'`, `'disabled'`, `'reserved'`, `'fail'`, `'fail-sss'` See Important properties for more information.
`compatible`	`string-array`	compatible strings This property is required. See Important properties for more information.
`reg-names`	`string-array`	name of each register space
`interrupts-extended`	`compound`	extended interrupt specifier for device
`interrupt-names`	`string-array`	name of each interrupt
`interrupt-parent`	`phandle`	phandle to interrupt controller node
`label`	`string`	Human readable string describing the device (used as device_get_binding() argument) See Important properties for more information.
`clocks`	`phandle-array`	Clock gate information
`clock-names`	`string-array`	name of each clock
`#address-cells`	`int`	number of address cells in reg property
`#size-cells`	`int`	number of size cells in reg property
`io-channels`	`phandle-array`	IO channels specifiers
`io-channel-names`	`string-array`	Provided names of IO channel specifiers
`mboxes`	`phandle-array`	mailbox / IPM channels specifiers
`mbox-names`	`string-array`	Provided names of mailbox / IPM channel specifiers
`wakeup-source`	`boolean`	Property to identify that a device can be used as wake up source. When this property is provided a specific flag is set into the device that tells the system that the device is capable of wake up the system. Wake up capable devices are disabled (interruptions will not wake up the system) by default but they can be enabled at runtime if necessary.