nordic,nrf-pwm
Vendor: Nordic Semiconductor
Description
nRF PWM
Properties
Properties not inherited from the base binding file.
Name |
Type |
Details |
|---|---|---|
|
|
Set this to use center-aligned (up and down) counter mode.
|
|
|
The channel 0 pin to use.
For pins P0.0 through P0.31, use the pin number. For example,
to use P0.16 for channel 0, set:
ch0-pin = <16>;
For pins P1.0 through P1.31, add 32 to the pin number. For
example, to use P1.2 for channel 0, set:
ch0-pin = <34>; /* 32 + 2 */
|
|
|
Set this to invert channel 0.
|
|
|
The channel 1 pin to use. The pin numbering scheme is the same
as the ch0-pin property's.
|
|
|
Set this to invert channel 1.
|
|
|
The channel 2 pin to use. The pin numbering scheme is the same
as the ch0-pin property's.
|
|
|
Set this to invert channel 2.
|
|
|
The channel 3 pin to use. The pin numbering scheme is the same
as the ch0-pin property's.
|
|
|
Set this to invert channel 3.
|
|
|
Number of items to expect in a pwm specifier
This property is required. Constant value: |
Deprecated properties not inherited from the base binding file.
(None)
Properties inherited from the base binding file, which defines common properties that may be set on many nodes. Not all of these may apply to the “nordic,nrf-pwm” compatible.
Name |
Type |
Details |
|---|---|---|
|
|
register space
This property is required. See Important properties for more information. |
|
|
Human readable string describing the device (used as device_get_binding() argument)
This property is required. See Important properties for more information. |
|
|
indicates the operational status of a device
Legal values: See Important properties for more information. |
|
|
compatible strings
This property is required. See Important properties for more information. |
|
|
name of each register space
|
|
|
interrupts for device
See Important properties for more information. |
|
|
extended interrupt specifier for device
|
|
|
name of each interrupt
|
|
|
phandle to interrupt controller node
|
|
|
Clock gate information
|
|
|
name of each clock
|
|
|
number of address cells in reg property
|
|
|
number of size cells in reg property
|
|
|
DMA channels specifiers
|
|
|
Provided names of DMA channel specifiers
|
|
|
IO channels specifiers
|
|
|
Provided names of IO channel specifiers
|
|
|
mailbox / IPM channels specifiers
|
|
|
Provided names of mailbox / IPM channel specifiers
|
|
|
Property to identify that a device can be used as wake up source.
When this property is provided a specific flag is set into the
device that tells the system that the device is capable of
wake up the system.
Wake up capable devices are disabled (interruptions will not wake up
the system) by default but they can be enabled at runtime if necessary.
|
Specifier cell names
pwm cells: channel