nordic,nrf-i2s

Description

These nodes are “i2s” bus nodes.

Nordic I2S (Inter-IC sound interface)

Properties

Properties not inherited from the base binding file.

Name	Type	Details
`sck-pin`	`int`	SCK pin This property is required.
`lrck-pin`	`int`	LRCK pin This property is required.
`sdout-pin`	`int`	SDOUT pin
`sdin-pin`	`int`	SDIN pin
`mck-pin`	`int`	MCK pin
`clock-source`	`string`	Clock source to be used by the I2S peripheral for the master clock (MCK) generator. The generator is only needed when the I2S peripheral is operating in Master mode. The following options are available: - "PCLK32M": 32 MHz peripheral clock, synchronous to HFCLK - "PCLK32M_HFXO": PCLK32M running off the 32 MHz crystal oscillator (HFXO) for better clock accuracy and jitter performance - "ACLK": Audio PLL clock with configurable frequency (frequency for this clock must be set via the "hfclkaudio-frequency" property in the "nordic,nrf-clock" node); this clock source is only available in the nRF53 Series SoCs and it requires the use of HFXO Default value: `PCLK32M_HFXO` Legal values: `'PCLK32M'`, `'PCLK32M_HFXO'`, `'ACLK'`

Properties inherited from the base binding file, which defines common properties that may be set on many nodes. Not all of these may apply to the “nordic,nrf-i2s” compatible.

Name	Type	Details
`reg`	`array`	register space This property is required. See Important properties for more information.
`interrupts`	`array`	interrupts for device This property is required. See Important properties for more information.
`#address-cells`	`int`	number of address cells in reg property This property is required. Constant value: `1`
`#size-cells`	`int`	number of size cells in reg property This property is required.
`label`	`string`	Human readable string describing the device (used as device_get_binding() argument) This property is required. See Important properties for more information.
`status`	`string`	indicates the operational status of a device Legal values: `'ok'`, `'okay'`, `'disabled'`, `'reserved'`, `'fail'`, `'fail-sss'` See Important properties for more information.
`compatible`	`string-array`	compatible strings This property is required. See Important properties for more information.
`reg-names`	`string-array`	name of each register space
`interrupts-extended`	`compound`	extended interrupt specifier for device
`interrupt-names`	`string-array`	name of each interrupt
`interrupt-parent`	`phandle`	phandle to interrupt controller node
`clocks`	`phandle-array`	Clock gate information
`clock-names`	`string-array`	name of each clock
`dmas`	`phandle-array`	DMA channels specifiers
`dma-names`	`string-array`	Provided names of DMA channel specifiers
`io-channels`	`phandle-array`	IO channels specifiers
`io-channel-names`	`string-array`	Provided names of IO channel specifiers
`mboxes`	`phandle-array`	mailbox / IPM channels specifiers
`mbox-names`	`string-array`	Provided names of mailbox / IPM channel specifiers
`wakeup-source`	`boolean`	Property to identify that a device can be used as wake up source. When this property is provided a specific flag is set into the device that tells the system that the device is capable of wake up the system. Wake up capable devices are disabled (interruptions will not wake up the system) by default but they can be enabled at runtime if necessary.