ECB HAL

group nrf_ecb_hal

Hardware access layer (HAL) for managing the Advanced Encryption Standard (AES) Electronic Codebook (ECB) peripheral.

Enums

enum nrf_ecb_task_t

ECB tasks.

Values:

enumerator NRF_ECB_TASK_STARTECB

Task for starting the ECB block encryption.

enumerator NRF_ECB_TASK_STOPECB

Task for stopping the ECB block encryption.

enum nrf_ecb_event_t

ECB events.

Values:

enumerator NRF_ECB_EVENT_ENDECB

ECB block encrypt complete.

enumerator NRF_ECB_EVENT_ERRORECB

ECB block encrypt aborted because of a STOPECB task or due to an error.

enum nrf_ecb_int_mask_t

ECB interrupts.

Values:

enumerator NRF_ECB_INT_ENDECB_MASK

Interrupt on ENDECB event.

enumerator NRF_ECB_INT_ERRORECB_MASK

Interrupt on ERRORECB event.

Functions

NRF_STATIC_INLINE void nrf_ecb_task_trigger(NRF_ECB_Type *p_reg, nrf_ecb_task_t task)

Function for activating the specified ECB task.

Parameters

  • p_reg – [in] Pointer to the peripheral register structure.

  • task – [in] Task to be activated.

NRF_STATIC_INLINE uint32_t nrf_ecb_task_address_get(NRF_ECB_Type const *p_reg, nrf_ecb_task_t task)

Function for getting the address of the specified ECB task register.

Parameters

  • p_reg – [in] Pointer to the peripheral register structure.

  • task – [in] Requested task.

Returns

Address of the specified task register.

NRF_STATIC_INLINE void nrf_ecb_event_clear(NRF_ECB_Type *p_reg, nrf_ecb_event_t event)

Function for clearing the specified ECB event.

Parameters

  • p_reg – [in] Pointer to the peripheral register structure.

  • event – [in] Event to clear.

NRF_STATIC_INLINE bool nrf_ecb_event_check(NRF_ECB_Type const *p_reg, nrf_ecb_event_t event)

Function for retrieving the state of the ECB event.

Parameters

  • p_reg – [in] Pointer to the structure of registers of the peripheral.

  • event – [in] Event to be checked.

Return values

  • true – The event has been generated.

  • false – The event has not been generated.

NRF_STATIC_INLINE uint32_t nrf_ecb_event_address_get(NRF_ECB_Type const *p_reg, nrf_ecb_event_t event)

Function for getting the address of the specified ECB event register.

Parameters

  • p_reg – [in] Pointer to the peripheral register structure.

  • event – [in] Requested event.

Returns

Address of the specified event register.

NRF_STATIC_INLINE void nrf_ecb_int_enable(NRF_ECB_Type *p_reg, uint32_t mask)

Function for enabling the specified interrupts.

Parameters

  • p_reg – [in] Pointer to the peripheral register structure.

  • mask – [in] Interrupts to be enabled.

NRF_STATIC_INLINE void nrf_ecb_int_disable(NRF_ECB_Type *p_reg, uint32_t mask)

Function for disabling the specified interrupts.

Parameters

  • p_reg – [in] Pointer to the peripheral register structure.

  • mask – [in] Interrupts to be disabled.

NRF_STATIC_INLINE uint32_t nrf_ecb_int_enable_check(NRF_ECB_Type const *p_reg, uint32_t mask)

Function for checking if the specified interrupts are enabled.

Parameters

  • p_reg – [in] Pointer to the structure of registers of the peripheral.

  • mask – [in] Mask of interrupts to be checked.

Returns

Mask of enabled interrupts.

NRF_STATIC_INLINE void nrf_ecb_data_pointer_set(NRF_ECB_Type *p_reg, void const *p_buffer)

Function for setting the pointer to the ECB data buffer.

Note

The buffer has to be placed in the Data RAM region. For description of the data structure in this buffer, see the Product Specification.

Parameters

  • p_reg – [in] Pointer to the peripheral register structure.

  • p_buffer – [in] Pointer to the ECB data buffer.

NRF_STATIC_INLINE void *nrf_ecb_data_pointer_get(NRF_ECB_Type const *p_reg)

Function for getting the pointer to the ECB data buffer.

Parameters

  • p_reg – [in] Pointer to the peripheral register structure.

Returns

Pointer to the ECB data buffer.

NRF_STATIC_INLINE void nrf_ecb_subscribe_set(NRF_ECB_Type *p_reg, nrf_ecb_task_t task, uint8_t channel)

Function for setting the subscribe configuration for a given ECB task.

Parameters

  • p_reg – [in] Pointer to the structure of registers of the peripheral.

  • task – [in] Task for which to set the configuration.

  • channel – [in] Channel through which to subscribe events.

NRF_STATIC_INLINE void nrf_ecb_subscribe_clear(NRF_ECB_Type *p_reg, nrf_ecb_task_t task)

Function for clearing the subscribe configuration for a given ECB task.

Parameters

  • p_reg – [in] Pointer to the structure of registers of the peripheral.

  • task – [in] Task for which to clear the configuration.

NRF_STATIC_INLINE void nrf_ecb_publish_set(NRF_ECB_Type *p_reg, nrf_ecb_event_t event, uint8_t channel)

Function for setting the publish configuration for a given ECB event.

Parameters

  • p_reg – [in] Pointer to the structure of registers of the peripheral.

  • event – [in] Event for which to set the configuration.

  • channel – [in] Channel through which to publish the event.

NRF_STATIC_INLINE void nrf_ecb_publish_clear(NRF_ECB_Type *p_reg, nrf_ecb_event_t event)

Function for clearing the publish configuration for a given ECB event.

Parameters

  • p_reg – [in] Pointer to the structure of registers of the peripheral.

  • event – [in] Event for which to clear the configuration.