GATT DFU SMP Service Client

Service UUID
Characteristics
- SMP Characteristic (DA2E7828-FBCE-4E01-AE9E-261174997C48)
Usage
API documentation

This module implements a Simple Management Protocol (SMP) Service Client that can be used in the context of Device Firmware Updates (DFU). SMP is a basic transfer encoding for use with the mcumgr management protocol. See SMP over Bluetooth for the service specification.

The SMP Client module can be used to interact with Zephyr’s SMP Server Sample.

The SMP Client implements only the service. It does not provide any functionality to process or interpret SMP commands and responses.

The SMP Service Client is used in the Bluetooth: Central SMP Client sample.

Service UUID 

The 128-bit service UUID is 8D53DC1D-1DB7-4CD3-868B-8A527460AA84 (16-bit offset: 0x0001).

Characteristics 

This service has one characteristic that is used for both requests and responses.

SMP Characteristic (DA2E7828-FBCE-4E01-AE9E-261174997C48)

Write Without Response

Write an SMP command with data.

Notify

Response to the SMP command is sent using notification.
Multiple notifications may be generated if the response does not fit in a single MTU.

Usage 

Note

Do not access any of the values in the bt_dfu_smp object structure directly. All values that should be accessed have accessor functions. The reason that the structure is fully defined is to allow the application to allocate the memory for it.

MTU negotiation 

The current DFU SMP Server implementation in the SMP Server Sample requires the whole command to be sent in one transfer. For most operations, this requires a bigger MTU size than the default one. This requires MTU negotiation in the MTU exchange process (see bt_gatt_exchange_mtu()). Writing long characteristic values is not supported.

Note that this is a limitation of the SMP Server Sample, not of the SMP Client.

Sending a command 

To send a command, use bt_dfu_smp_command(). The command is provided as a raw binary buffer consisting of a dfu_smp_header and the payload.

Processing the response 

The response to a command is sent as notification. It is passed to the callback function that was provided when issuing the command with bt_dfu_smp_command().

Use bt_dfu_smp_rsp_state() to access the data of the current part of the response. As the response might be received in multiple notifications, use bt_dfu_smp_rsp_total_check() to verify if this is the last part of the response. The offset size of the current part and the total size are available in fields of the bt_dfu_smp_rsp_state structure.

API documentation 

Header file: include/bluetooth/services/dfu_smp.h

Source file: subsys/bluetooth/services/dfu_smp.c

group bt_dfu_smp

API for the Bluetooth LE GATT DFU SMP (DFU_SMP) Client.

Defines

BT_UUID_DFU_SMP_SERVICE_VAL

SMP Service.

The 128-bit service UUID is 8D53DC1D-1DB7-4CD3-868B-8A527460AA84.

BT_UUID_DFU_SMP_SERVICE

BT_UUID_DFU_SMP_CHAR_VAL

SMP Characteristic.

The characteristic is used for both requests and responses. The UUID is DA2E7828-FBCE-4E01-AE9E-261174997C48.

BT_UUID_DFU_SMP_CHAR

Typedefs

typedef void (*bt_dfu_smp_rsp_part_cb)(struct bt_dfu_smp *dfu_smp)

Handle part of the response.

Param dfu_smp: DFU SMP Client instance.

typedef void (*bt_dfu_smp_error_cb)(struct bt_dfu_smp *dfu_smp, int err)

Global function that is called when an error occurs.

Param dfu_smp: DFU SMP Client instance.
Param err: Negative internal error code or positive GATT error code.

Functions

int bt_dfu_smp_init(struct bt_dfu_smp *dfu_smp, const struct bt_dfu_smp_init_params *params)

Initialize the DFU SMP Client module.

Parameters

dfu_smp – [out] DFU SMP Client instance.
params – [in] Initialization parameter.

Return values

0 – If the operation was successful. Otherwise, a (negative) error code is returned.

int bt_dfu_smp_handles_assign(struct bt_gatt_dm *dm, struct bt_dfu_smp *dfu_smp)

Assign handles to the DFU SMP Client instance.

Parameters

dm – [inout] Discovery object.
dfu_smp – [inout] DFU SMP Client instance.

Return values

0 – If the operation was successful. Otherwise, a (negative) error code is returned.
(-ENOTSUP) – Special error code used when the UUID of the service does not match the expected UUID.

int bt_dfu_smp_command(struct bt_dfu_smp *dfu_smp, bt_dfu_smp_rsp_part_cb rsp_cb, size_t cmd_size, const void *cmd_data)

Execute a command.

Parameters

dfu_smp – [inout] DFU SMP Client instance.
rsp_cb – [in] Callback function to process the response.
cmd_size – [in] Size of the command data buffer.
cmd_data – [in] Data buffer.

Return values

0 – If the operation was successful. Otherwise, a (negative) error code is returned.

struct bt_conn *bt_dfu_smp_conn(const struct bt_dfu_smp *dfu_smp)

Get the connection object that is used with the DFU SMP Client.

Parameters

dfu_smp – [in] DFU SMP Client instance.

Returns

Connection object.

const struct bt_dfu_smp_rsp_state *bt_dfu_smp_rsp_state(const struct bt_dfu_smp *dfu_smp)

Get the current response state.

Note

This function should be used inside a response callback function that is provided to bt_dfu_smp_command.

Parameters

dfu_smp – DFU SMP Client instance.

Returns

The pointer to the response state structure.

bool bt_dfu_smp_rsp_total_check(const struct bt_dfu_smp *dfu_smp)

Check if all response parts have been received.

This auxiliary function checks if the current response part is the final one.

Note

This function should be used inside a response callback function that is provided to bt_dfu_smp_command.

Parameters

dfu_smp – DFU SMP Client instance.

Return values

true – If the current part is the final one.
false – If the current part is not the final one.

struct bt_dfu_smp_header

#include <dfu_smp.h>

Header used internally by dfu_smp.

Public Members

uint8_t op: Operation.

uint8_t flags: Operational flags.

uint8_t len_h8: Payload length high byte.

uint8_t len_l8: Payload length low byte.

uint8_t group_h8: Group ID high byte.

uint8_t group_l8: Group ID low byte.

uint8_t seq: Sequence number.

uint8_t id: Command ID.

struct bt_dfu_smp_rsp_state

#include <dfu_smp.h>

Current response state.

Public Members

size_t total_size

Total size of the response.

Total expected size of the response. This value is retrieved from the first part of the response, where the SMP header is located.

size_t offset: Current data chunk offset.

size_t chunk_size: The size of the data chunk.

const uint8_t *data: Pointer to the data.

struct bt_dfu_smp_init_params

#include <dfu_smp.h>

DFU SMP Client parameters for the initialization function.

Public Members

bt_dfu_smp_error_cb error_cb

Callback pointer for error handler.

This function is called when an error occurs.

struct bt_dfu_smp

#include <dfu_smp.h>

DFU SMP Client structure.

Public Members

struct bt_conn *conn: Connection object.

struct bt_dfu_smp_rsp_state rsp_state: Current response state.

struct bt_gatt_subscribe_params notification_params

Response notification parameters.

These parameters are set for the SMP response notification.

The status of the notification is reflected by the notify field. Notifications must be enabled before the command is sent. This is handled automatically by the library.

struct bt_dfu_smp_cbs

#include <dfu_smp.h>

Callbacks.

Public Members

bt_dfu_smp_error_cb error_cb

Callback pointer for global error.

This function is called when a global error occurs.

bt_dfu_smp_rsp_part_cb rsp_part

Callback pointer for receiving the response.

The pointer is set to NULL when the response is finished.

struct bt_dfu_smp_handles

#include <dfu_smp.h>

Handles.

Public Members

uint16_t smp: SMP characteristic value handle.

uint16_t smp_ccc: SMP characteristic CCC handle.