Application integration

The LwM2M carrier library has an OS abstraction layer. See lwm2m_os.h. This abstraction layer makes the LwM2M carrier library independent of the nRF Connect SDK modules and underlying implementation of primitives such as timers, non-volatile storage, and heap allocation. It provides an abstraction of the following modules:

• nRF Connect SDK modules:

  • AT monitor

  • LTE link controller

  • Download client

  • Modem key management

  • SMS subscriber

  • PDN

• Zephyr modules:

  • Kernel Services (include/kernel.h)

  • Non-Volatile Storage (NVS)

The OS abstraction layer is fully implemented for the nRF Connect SDK, and it would have to be ported if used with other RTOS or on other systems.

To run the library in an application, you must implement the application with the API of the library. You can enable the module using the CONFIG_LWM2M_CARRIER Kconfig option.

The nRF9160: LwM2M carrier sample project configuration (nrf/samples/nrf9160/lwm2m_carrier/prj.conf) contains all the configurations that are needed by the LwM2M carrier library.

You can provide the initialization parameter lwm2m_carrier_config_t to overwrite the carrier default settings with the Kconfig options described below:

• CONFIG_LWM2M_CARRIER_CERTIFICATION_MODE:

  • This configuration specifies if the LwM2M carrier library will connect to the carrier’s certification servers or production servers.

  • Expected to be set during self-testing part of the certification process.

  • This configuration is ignored if CONFIG_LWM2M_CARRIER_USE_CUSTOM_URI is set.

• CONFIG_LWM2M_CARRIER_USE_CUSTOM_URI:

  • This configuration, together with CONFIG_LWM2M_CARRIER_USE_CUSTOM_URI lets the LwM2M carrier library connect to a custom server other than the normal carrier server, thereby enabling the generic mode.

  • Expected to be set during self-testing, or if the end product is not to be certified with the applicable carriers. See Certification and version dependencies.

  • If this configuration is set, CONFIG_LWM2M_CARRIER_CERTIFICATION_MODE is ignored.

• CONFIG_LWM2M_CARRIER_IS_SERVER_BOOTSTRAP:

  • This configuration specifies if the custom LwM2M server is a LwM2m Bootstrap-Server.

  • This setting is ignored if CONFIG_LWM2M_CARRIER_CERTIFICATION_MODE is set, since the LwM2M library will instead connect to the servers specified by the applicable carriers.

• CONFIG_LWM2M_CARRIER_SERVER_LIFETIME:

  • This configuration specifies the lifetime of the custom LwM2M server.

  • This configuration is ignored if CONFIG_LWM2M_CARRIER_CERTIFICATION_MODE or CONFIG_LWM2M_CARRIER_IS_SERVER_BOOTSTRAP is set.

• CONFIG_LWM2M_CARRIER_USE_CUSTOM_PSK:

  • This configuration, together with CONFIG_LWM2M_CARRIER_CUSTOM_PSK can be set to use a non-default Pre-Shared Key (PSK).

  • If connecting to the normal carrier device management servers (normal operation), this configuration must not be set unless your carrier explicitly states to use a custom PSK, for example during self-testing.

  • If the CONFIG_LWM2M_CARRIER_USE_CUSTOM_URI option is set and the server requires a secure connection, a PSK is required.

• CONFIG_LWM2M_CARRIER_USE_CUSTOM_APN:

  • This configuration, together with CONFIG_LWM2M_CARRIER_CUSTOM_APN produce different results depending on normal or generic mode of operation.

  • If CONFIG_LWM2M_CARRIER_USE_CUSTOM_URI is not set (normal), this configuration supplies a fallback APN. This might be required in your application, depending on the requirements from the carrier.

  • If CONFIG_LWM2M_CARRIER_USE_CUSTOM_URI is set (generic), CONFIG_LWM2M_CARRIER_CUSTOM_APN is used instead of the default APN, (and there is no fallback APN).

• CONFIG_LWM2M_CARRIER_BOOTSTRAP_SMARTCARD:

• This configuration allows the LwM2M carrier library to use a URI stored in the SIM card. The configuration in the SIM will take precedence over any other configuration. For example, if a bootstrap server URI is fetched from the SIM, the CONFIG_LWM2M_CARRIER_IS_SERVER_BOOTSTRAP configuration is ignored. If a production server URI is fetched from the SIM, the CONFIG_LWM2M_CARRIER_CERTIFICATION_MODE configuration is ignored.

Note that these settings can put the LwM2M carrier library either in the normal mode where it connects to the applicable carriers, or in the generic mode where it can connect to any bootstrap server.

Note

A change of the bootstrap server URI between builds does not trigger a new bootstrap. The bootstrap process is intended to happen only once unless it is initiated from the server. To redo the bootstrap process, you must erase the flash and then load your application again.

After calling the lwm2m_carrier_init() function, your application can call the non-returning function lwm2m_carrier_run() in its own thread. Both these functions are called in nrf\lib\bin\lwm2m_carrier\os\lwm2m_carrier.c, which is included into the project when you enable the LwM2M carrier library.

The lwm2m_carrier_event_handler() function must be implemented by your application. This is shown in the nRF9160: LwM2M carrier sample. A weak implementation is included in nrf\lib\bin\lwm2m_carrier\os\lwm2m_carrier.c.

See nrf\lib\bin\lwm2m_carrier\include\lwm2m_carrier.h for all the events and API.

LwM2M carrier library events

Following are the various LwM2M carrier library events:

• LWM2M_CARRIER_EVENT_MODEM_INIT:

  • This event indicates that the Modem library is initialized and can be used. See Requirements and application limitations).

• LWM2M_CARRIER_EVENT_CERTS_INIT:

  • This event indicates that the CA certificates must be provisioned to the modem by the application. The LwM2M carrier library expects the application to assign the event data lwm2m_carrier_event_t.data to a structure ca_cert_tags_t. This structure must contain the security tags that indicate where the CA certificates are stored in the modem. See nRF9160: LwM2M carrier sample for an example of how these certificates are written to the modem using Modem key management library. The LwM2M carrier library will apply these certificates during certain out-of-band FOTA operations.

• LWM2M_CARRIER_EVENT_CONNECTING, LWM2M_CARRIER_EVENT_CONNECTED, LWM2M_CARRIER_EVENT_DISCONNECTING, LWM2M_CARRIER_EVENT_DISCONNECTED:

  • These events indicate that the device is connecting to or disconnecting from the LTE network. They occur during the bootstrapping process, startup, and during FOTA.

• LWM2M_CARRIER_EVENT_BOOTSTRAPPED:

  • This event indicates that the bootstrap sequence is complete, and that the device is ready to be registered.

  • This event is typically seen during the first boot-up.

• LWM2M_CARRIER_EVENT_LTE_READY:

  • This event indicates that the device is registered to the LTE network (home or roaming).

  • The bootstrap sequence is complete, and the application can use the LTE link.

• LWM2M_CARRIER_EVENT_REGISTERED:

  • This event indicates that the device has registered successfully to the carrier’s device management servers.

• LWM2M_CARRIER_EVENT_DEFERRED:

  • This event indicates that the connection to the device management server has failed.

  • The LWM2M_CARRIER_EVENT_DEFERRED event appears instead of the LWM2M_CARRIER_EVENT_REGISTERED event.

  • The timeout parameter supplied with this event determines when the LwM2M carrier library will retry the connection.

  • Following are the various deferred reasons:

    • LWM2M_CARRIER_DEFERRED_NO_REASON - The application need not take any special action. If timeout is 24 hours, the application can proceed with other activities until the retry takes place.

    • LWM2M_CARRIER_DEFERRED_PDN_ACTIVATE - This event indicates problem with the SIM card, or temporary network problems. If this persists, contact your carrier.

    • LWM2M_CARRIER_DEFERRED_BOOTSTRAP_CONNECT - The DTLS handshake with the bootstrap server has failed. If the application is using a custom PSK, verify that the format is correct.

    • LWM2M_CARRIER_DEFERRED_BOOTSTRAP_SEQUENCE - The bootstrap sequence is incomplete. The server failed either to acknowledge the request by the library, or to send objects to the library. Confirm that the carrier is aware of the IMEI.

    • LWM2M_CARRIER_DEFERRED_SERVER_NO_ROUTE, LWM2M_CARRIER_DEFERRED_BOOTSTRAP_NO_ROUTE - There is a routing problem in the carrier network. If this event persists, contact the carrier.

    • LWM2M_CARRIER_DEFERRED_SERVER_CONNECT - This event indicates that the DTLS handshake with the server has failed. This typically happens if the bootstrap sequence has failed on the carrier side.

    • LWM2M_CARRIER_DEFERRED_SERVER_REGISTRATION - The server registration has not completed, and the server does not recognize the connecting device. If this event persists, contact the carrier.

    • LWM2M_CARRIER_DEFERRED_SERVICE_UNAVAILABLE - The server is unavailable due to maintenance.

• LWM2M_CARRIER_EVENT_FOTA_START:

  • This event indicates that the modem update has started.

  • The application must immediately terminate any open TLS sessions.

  • See Requirements and application limitations.

• LWM2M_CARRIER_EVENT_REBOOT:

  • This event indicates that the LwM2M carrier library will reboot the device.

  • If the application is not ready to reboot, it must return non-zero and then reboot at the earliest convenient time.

• LWM2M_CARRIER_EVENT_ERROR:

  • This event indicates an error.

  • The event data struct lwm2m_carrier_event_error_t contains the information about the error (code and value).

  • Following are the valid error codes:

    • LWM2M_CARRIER_ERROR_CONNECT_FAIL - This error is generated from the lte_lc_init_and_connect() function. It indicates possible problems with the SIM card, or insufficient network coverage. See value field of the event.

    • LWM2M_CARRIER_ERROR_DISCONNECT_FAIL - This error is generated from the lte_lc_offline() function. See value field of the event.

    • LWM2M_CARRIER_ERROR_BOOTSTRAP - This error is generated during the bootstrap procedure.

      Errors	More information	Recovery
      Retry limit for connecting to the bootstrap server has been reached (-ETIMEDOUT).	Common reason for this failure can be incorrect URI or PSK, or the server is unavailable (for example temporary network issues). If this error persists, contact your carrier.	Library will retry after next device reboot.
      Failure to provision the PSK needed for the bootstrap procedure.	If the link is forced up by the application during the bootstrap procedure the error will be -EACCES. Verify that the LwM2M library is controlling the link until the LWM2M_CARRIER_EVENT_LTE_READY event is sent.	Library will retry after 24 hours.
      Failure to read MSISDN or ICCID values (-EFAULT).	ICCID is fetched from SIM, while MSISDN will be received from the network for some carriers. If it has not been issued yet, the bootstrap process can not proceed.	Library will retry upon next network connection.

    • LWM2M_CARRIER_ERROR_FOTA_PKG - This error indicates that the update package has been rejected. The integrity check has failed because of a wrong package sent from the server, or a wrong package received by client. The value field will have an error of type nrf_dfu_err_t from the file nrfxlib\nrf_modem\include\nrf_socket.h.

    • LWM2M_CARRIER_ERROR_FOTA_PROTO - This error indicates a protocol error. There might be unexpected HTTP header contents. The server might not support partial content requests.

    • LWM2M_CARRIER_ERROR_FOTA_CONN - This error indicates a connection problem. Either the server host name could not be resolved, or the remote server refused the connection.

    • LWM2M_CARRIER_ERROR_FOTA_CONN_LOST - This error indicates a loss of connection, or an unexpected closure of connection by the server.

    • LWM2M_CARRIER_ERROR_FOTA_FAIL - This error indicates a failure in applying a valid update. If this error persists, create a ticket in DevZone with the modem trace.

    • LWM2M_CARRIER_ERROR_CONFIGURATION - This error indicates that an illegal object configuration was detected.

Device objects

The following values that reflect the state of the device must be kept up to date by the application:

• Available Power Sources

• Power Source Voltage

• Power Source Current

• Battery Level

• Battery Status

• Memory Total

• Error Code

• Device Type (Defaults to Smart Device if not set)

• Software Version (Defaults to LwM2M <libversion>. For example, LwM2M 0.21.0 for release 0.21.0.)

• Hardware Version (Defaults to 1.0 if not set)

• Location

For example, the carrier device management platform can observe the battery level of your device. The application uses the lwm2m_carrier_battery_level_set() function to indicate the current battery level of the device to the carrier.