CONFIG_SOC_ATMEL_SAM3X_PLLA_MULA

(No prompt – not directly user assignable.)

Type: hex

Help

This is the multiplier (MULA) used by the PLL.
The processor clock is (MAINCK * (MULA + 1) / DIVA).

Board config file can override this settings
for a particular board.

With default of MULA == 6, and DIVA == 1,
PLL is running at 7 times of main clock.

Help

This is the multiplier (MULA) used by the PLL.
The processor clock is (MAINCK * (MULA + 1) / DIVA).

Board config file can override this settings
for a particular board.

With default of MULA == 6, and DIVA == 1,
PLL is running at 7 times of main clock.

Direct dependencies

(SOC_SERIES_SAM3X && SOC_FAMILY_SAM) || (SOC_SERIES_SAM3X && SOC_FAMILY_SAM)

(Includes any dependencies from ifs and menus.)

Defaults

• 0x06

• 0x06

Kconfig definitions

At <Zephyr>/soc/arm/atmel_sam/sam3x/Kconfig.soc:54

Included via <Zephyr>/Kconfig:8 → <Zephyr>/Kconfig.zephyr:38 → <Zephyr>/soc/Kconfig:15 → <nRF>/doc/_build/kconfig/Kconfig.soc.arch:2 → <Zephyr>/soc/arm/atmel_sam/Kconfig:17

Menu path: (Top) → Hardware Configuration

config SOC_ATMEL_SAM3X_PLLA_MULA
    hex
    default 0x06
    depends on SOC_SERIES_SAM3X && SOC_FAMILY_SAM
    help
      This is the multiplier (MULA) used by the PLL.
      The processor clock is (MAINCK * (MULA + 1) / DIVA).

      Board config file can override this settings
      for a particular board.

      With default of MULA == 6, and DIVA == 1,
      PLL is running at 7 times of main clock.

---

At <Zephyr>/soc/arm/atmel_sam/sam3x/Kconfig.soc:54

Included via <Zephyr>/Kconfig:8 → <Zephyr>/Kconfig.zephyr:38 → <Zephyr>/soc/Kconfig:18 → <Zephyr>/soc/arm/atmel_sam/Kconfig:17

Menu path: (Top) → Hardware Configuration

config SOC_ATMEL_SAM3X_PLLA_MULA
    hex
    default 0x06
    depends on SOC_SERIES_SAM3X && SOC_FAMILY_SAM
    help
      This is the multiplier (MULA) used by the PLL.
      The processor clock is (MAINCK * (MULA + 1) / DIVA).

      Board config file can override this settings
      for a particular board.

      With default of MULA == 6, and DIVA == 1,
      PLL is running at 7 times of main clock.

(The ‘depends on’ condition includes propagated dependencies from ifs and menus.)