CONFIG_GPIO_CMSDK_AHB

ARM CMSDK (Cortex-M System Design Kit) AHB GPIO Controllers

Type: bool

Help

Enable config options to support the ARM CMSDK GPIO controllers.

Says n if not sure.

Direct dependencies

(GPIO && BOARD_MPS2_AN385) || (GPIO && (BOARD_MPS2_AN521_CPU0 || BOARD_MPS2_AN521_CPU0_NS || BOARD_MPS2_AN521_CPU1)) || (GPIO && BOARD_MPS3_AN547) || (GPIO && BOARD_V2M_BEETLE) || (GPIO && BOARD_MUSCA_B1) || (GPIO && BOARD_MUSCA_S1) || (SOC_FAMILY_ARM && GPIO)

(Includes any dependencies from ifs and menus.)

Defaults

y
y
y
y
y
y

Kconfig definitions

At <Zephyr>/boards/arm/mps2_an385/Kconfig.defconfig:11

Included via <Zephyr>/Kconfig:8 → <Zephyr>/Kconfig.zephyr:22

Menu path: (Top)

config GPIO_CMSDK_AHB
    bool
    default y
    depends on GPIO && BOARD_MPS2_AN385

At <Zephyr>/boards/arm/mps2_an521/Kconfig.defconfig:27

Included via <Zephyr>/Kconfig:8 → <Zephyr>/Kconfig.zephyr:22

Menu path: (Top)

config GPIO_CMSDK_AHB
    bool
    default y
    depends on GPIO && (BOARD_MPS2_AN521_CPU0 || BOARD_MPS2_AN521_CPU0_NS || BOARD_MPS2_AN521_CPU1)

At <Zephyr>/boards/arm/mps3_an547/Kconfig.defconfig:19

Included via <Zephyr>/Kconfig:8 → <Zephyr>/Kconfig.zephyr:22

Menu path: (Top)

config GPIO_CMSDK_AHB
    bool
    default y
    depends on GPIO && BOARD_MPS3_AN547

At <Zephyr>/boards/arm/v2m_beetle/Kconfig.defconfig:13

Included via <Zephyr>/Kconfig:8 → <Zephyr>/Kconfig.zephyr:22

Menu path: (Top)

config GPIO_CMSDK_AHB
    bool
    default y
    depends on GPIO && BOARD_V2M_BEETLE

At <Zephyr>/boards/arm/v2m_musca_b1/Kconfig.defconfig:12

Included via <Zephyr>/Kconfig:8 → <Zephyr>/Kconfig.zephyr:22

Menu path: (Top)

config GPIO_CMSDK_AHB
    bool
    default y
    depends on GPIO && BOARD_MUSCA_B1

At <Zephyr>/boards/arm/v2m_musca_s1/Kconfig.defconfig:12

Included via <Zephyr>/Kconfig:8 → <Zephyr>/Kconfig.zephyr:22

Menu path: (Top)

config GPIO_CMSDK_AHB
    bool
    default y
    depends on GPIO && BOARD_MUSCA_S1

At <Zephyr>/drivers/gpio/Kconfig.cmsdk_ahb:6

Included via <Zephyr>/Kconfig:8 → <Zephyr>/Kconfig.zephyr:42 → <Zephyr>/drivers/Kconfig:36 → <Zephyr>/drivers/gpio/Kconfig:52

Menu path: (Top) → Device Drivers → GPIO Drivers

config GPIO_CMSDK_AHB
    bool "ARM CMSDK (Cortex-M System Design Kit) AHB GPIO Controllers"
    depends on SOC_FAMILY_ARM && GPIO
    help
      Enable config options to support the ARM CMSDK GPIO controllers.

      Says n if not sure.

(The ‘depends on’ condition includes propagated dependencies from ifs and menus.)