CONFIG_ETH_SAM_GMAC_MAC_I2C_SLAVE_ADDRESS

I2C 7-bit EEPROM chip address

Type: hex

Help

I2C 7-bit address of the EEPROM chip.

Direct dependencies

(ETH_SAM_GMAC && BOARD_SAM_E70_XPLAINED) || (ETH_SAM_GMAC && BOARD_SAM_V71_XULT) || (ETH_SAM_GMAC_MAC_I2C_EEPROM && ETH_SAM_GMAC && NET_L2_ETHERNET)

(Includes any dependencies from ifs and menus.)

Defaults

• 0x5F

• 0x5F

Kconfig definitions

At <Zephyr>/boards/arm/sam_e70_xplained/Kconfig.defconfig:15

Included via <Zephyr>/Kconfig:8 → <Zephyr>/Kconfig.zephyr:22

Menu path: (Top)

config ETH_SAM_GMAC_MAC_I2C_SLAVE_ADDRESS
    hex
    default 0x5F
    depends on ETH_SAM_GMAC && BOARD_SAM_E70_XPLAINED

---

At <Zephyr>/boards/arm/sam_v71_xult/Kconfig.defconfig:19

Included via <Zephyr>/Kconfig:8 → <Zephyr>/Kconfig.zephyr:22

Menu path: (Top)

config ETH_SAM_GMAC_MAC_I2C_SLAVE_ADDRESS
    hex
    default 0x5F
    depends on ETH_SAM_GMAC && BOARD_SAM_V71_XULT

---

At <Zephyr>/drivers/ethernet/Kconfig.sam_gmac:79

Included via <Zephyr>/Kconfig:8 → <Zephyr>/Kconfig.zephyr:42 → <Zephyr>/drivers/Kconfig:20 → <Zephyr>/drivers/ethernet/Kconfig:51

Menu path: (Top) → Device Drivers → Ethernet Drivers → Atmel SAM Ethernet driver → Read from an I2C EEPROM

config ETH_SAM_GMAC_MAC_I2C_SLAVE_ADDRESS
    hex "I2C 7-bit EEPROM chip address"
    range 0 0xff
    depends on ETH_SAM_GMAC_MAC_I2C_EEPROM && ETH_SAM_GMAC && NET_L2_ETHERNET
    help
      I2C 7-bit address of the EEPROM chip.

(The ‘depends on’ condition includes propagated dependencies from ifs and menus.)