CONFIG_ETH_SAM_GMAC_MAC_I2C_DEV_NAME

I2C bus driver device name

Type: string

Help

Device name, e.g. I2C_0, of an I2C bus driver device. It is required to
obtain handle to the I2C device object.

Direct dependencies

(ETH_SAM_GMAC && BOARD_SAM_E70_XPLAINED) || (ETH_SAM_GMAC && BOARD_SAM_V71_XULT) || (ETH_SAM_GMAC_MAC_I2C_EEPROM && ETH_SAM_GMAC && NET_L2_ETHERNET)

(Includes any dependencies from ifs and menus.)

Defaults

“I2C_0”
“I2C_0”

Kconfig definitions

At <Zephyr>/boards/arm/sam_e70_xplained/Kconfig.defconfig:24

Included via <Zephyr>/Kconfig:8 → <Zephyr>/Kconfig.zephyr:22

Menu path: (Top)

config ETH_SAM_GMAC_MAC_I2C_DEV_NAME
    string
    default "I2C_0"
    depends on ETH_SAM_GMAC && BOARD_SAM_E70_XPLAINED

At <Zephyr>/boards/arm/sam_v71_xult/Kconfig.defconfig:28

Included via <Zephyr>/Kconfig:8 → <Zephyr>/Kconfig.zephyr:22

Menu path: (Top)

config ETH_SAM_GMAC_MAC_I2C_DEV_NAME
    string
    default "I2C_0"
    depends on ETH_SAM_GMAC && BOARD_SAM_V71_XULT

At <Zephyr>/drivers/ethernet/Kconfig.sam_gmac:100

Included via <Zephyr>/Kconfig:8 → <Zephyr>/Kconfig.zephyr:42 → <Zephyr>/drivers/Kconfig:20 → <Zephyr>/drivers/ethernet/Kconfig:51

Menu path: (Top) → Device Drivers → Ethernet Drivers → Atmel SAM Ethernet driver → Read from an I2C EEPROM

config ETH_SAM_GMAC_MAC_I2C_DEV_NAME
    string "I2C bus driver device name"
    depends on ETH_SAM_GMAC_MAC_I2C_EEPROM && ETH_SAM_GMAC && NET_L2_ETHERNET
    help
      Device name, e.g. I2C_0, of an I2C bus driver device. It is required to
      obtain handle to the I2C device object.

(The ‘depends on’ condition includes propagated dependencies from ifs and menus.)