CONFIG_DYNAMIC_INTERRUPTS

Enable installation of IRQs at runtime

Type: bool

Help

Enable installation of interrupts at runtime, which will move some
interrupt-related data structures to RAM instead of ROM, and
on some architectures increase code size.

Defaults

y
y
y
y
y
y
y
y
y
y
y
y
y
y
y
y

Kconfig definitions

At <Zephyr>/soc/riscv/esp32c3/Kconfig.defconfig:23

Included via <Zephyr>/Kconfig:8 → <Zephyr>/Kconfig.zephyr:25 → <nRF>/doc/_build/kconfig/Kconfig.soc.defconfig:1

Menu path: (Top)

config DYNAMIC_INTERRUPTS
    bool
    default y
    depends on SOC_ESP32C3

At <Zephyr>/soc/riscv/riscv-ite/it8xxx2/Kconfig.defconfig.series:83

Included via <Zephyr>/Kconfig:8 → <Zephyr>/Kconfig.zephyr:25 → <nRF>/doc/_build/kconfig/Kconfig.soc.defconfig:1 → <Zephyr>/soc/riscv/riscv-ite/Kconfig.defconfig:4

Menu path: (Top)

config DYNAMIC_INTERRUPTS
    bool
    default y
    depends on ITE_IT8XXX2_INTC && SOC_SERIES_RISCV32_IT8XXX2

At <Zephyr>/soc/xtensa/intel_adsp/cavs_v15/Kconfig.defconfig.series:72

Included via <Zephyr>/Kconfig:8 → <Zephyr>/Kconfig.zephyr:25 → <nRF>/doc/_build/kconfig/Kconfig.soc.defconfig:1 → <Zephyr>/soc/xtensa/intel_adsp/Kconfig.defconfig:6

Menu path: (Top)

config DYNAMIC_INTERRUPTS
    bool
    default y
    depends on SOC_SERIES_INTEL_CAVS_V15

At <Zephyr>/soc/xtensa/intel_adsp/cavs_v18/Kconfig.defconfig.series:58

Included via <Zephyr>/Kconfig:8 → <Zephyr>/Kconfig.zephyr:25 → <nRF>/doc/_build/kconfig/Kconfig.soc.defconfig:1 → <Zephyr>/soc/xtensa/intel_adsp/Kconfig.defconfig:6

Menu path: (Top)

config DYNAMIC_INTERRUPTS
    bool
    default y
    depends on SOC_SERIES_INTEL_CAVS_V18

At <Zephyr>/soc/xtensa/intel_adsp/cavs_v20/Kconfig.defconfig.series:58

Included via <Zephyr>/Kconfig:8 → <Zephyr>/Kconfig.zephyr:25 → <nRF>/doc/_build/kconfig/Kconfig.soc.defconfig:1 → <Zephyr>/soc/xtensa/intel_adsp/Kconfig.defconfig:6

Menu path: (Top)

config DYNAMIC_INTERRUPTS
    bool
    default y
    depends on SOC_SERIES_INTEL_CAVS_V20

At <Zephyr>/soc/xtensa/intel_adsp/cavs_v25/Kconfig.defconfig.series:55

Included via <Zephyr>/Kconfig:8 → <Zephyr>/Kconfig.zephyr:25 → <nRF>/doc/_build/kconfig/Kconfig.soc.defconfig:1 → <Zephyr>/soc/xtensa/intel_adsp/Kconfig.defconfig:6

Menu path: (Top)

config DYNAMIC_INTERRUPTS
    bool
    default y
    depends on SOC_SERIES_INTEL_CAVS_V25

At <Zephyr>/soc/xtensa/nxp_adsp/imx8/Kconfig.defconfig.series:42

Included via <Zephyr>/Kconfig:8 → <Zephyr>/Kconfig.zephyr:25 → <nRF>/doc/_build/kconfig/Kconfig.soc.defconfig:1 → <Zephyr>/soc/xtensa/nxp_adsp/Kconfig.defconfig:6

Menu path: (Top)

config DYNAMIC_INTERRUPTS
    bool
    default y
    depends on SOC_SERIES_NXP_IMX8

At <Zephyr>/soc/xtensa/nxp_adsp/imx8m/Kconfig.defconfig.series:42

Included via <Zephyr>/Kconfig:8 → <Zephyr>/Kconfig.zephyr:25 → <nRF>/doc/_build/kconfig/Kconfig.soc.defconfig:1 → <Zephyr>/soc/xtensa/nxp_adsp/Kconfig.defconfig:6

Menu path: (Top)

config DYNAMIC_INTERRUPTS
    bool
    default y
    depends on SOC_SERIES_NXP_IMX8M

At <Zephyr>/soc/riscv/esp32c3/Kconfig.defconfig:23

Included via <Zephyr>/Kconfig:8 → <Zephyr>/Kconfig.zephyr:27

Menu path: (Top)

config DYNAMIC_INTERRUPTS
    bool
    default y
    depends on SOC_ESP32C3

At <Zephyr>/soc/riscv/riscv-ite/it8xxx2/Kconfig.defconfig.series:83

Included via <Zephyr>/Kconfig:8 → <Zephyr>/Kconfig.zephyr:27 → <Zephyr>/soc/riscv/riscv-ite/Kconfig.defconfig:4

Menu path: (Top)

config DYNAMIC_INTERRUPTS
    bool
    default y
    depends on ITE_IT8XXX2_INTC && SOC_SERIES_RISCV32_IT8XXX2

At <Zephyr>/soc/xtensa/intel_adsp/cavs_v15/Kconfig.defconfig.series:72

Included via <Zephyr>/Kconfig:8 → <Zephyr>/Kconfig.zephyr:27 → <Zephyr>/soc/xtensa/intel_adsp/Kconfig.defconfig:6

Menu path: (Top)

config DYNAMIC_INTERRUPTS
    bool
    default y
    depends on SOC_SERIES_INTEL_CAVS_V15

At <Zephyr>/soc/xtensa/intel_adsp/cavs_v18/Kconfig.defconfig.series:58

Included via <Zephyr>/Kconfig:8 → <Zephyr>/Kconfig.zephyr:27 → <Zephyr>/soc/xtensa/intel_adsp/Kconfig.defconfig:6

Menu path: (Top)

config DYNAMIC_INTERRUPTS
    bool
    default y
    depends on SOC_SERIES_INTEL_CAVS_V18

At <Zephyr>/soc/xtensa/intel_adsp/cavs_v20/Kconfig.defconfig.series:58

Included via <Zephyr>/Kconfig:8 → <Zephyr>/Kconfig.zephyr:27 → <Zephyr>/soc/xtensa/intel_adsp/Kconfig.defconfig:6

Menu path: (Top)

config DYNAMIC_INTERRUPTS
    bool
    default y
    depends on SOC_SERIES_INTEL_CAVS_V20

At <Zephyr>/soc/xtensa/intel_adsp/cavs_v25/Kconfig.defconfig.series:55

Included via <Zephyr>/Kconfig:8 → <Zephyr>/Kconfig.zephyr:27 → <Zephyr>/soc/xtensa/intel_adsp/Kconfig.defconfig:6

Menu path: (Top)

config DYNAMIC_INTERRUPTS
    bool
    default y
    depends on SOC_SERIES_INTEL_CAVS_V25

At <Zephyr>/soc/xtensa/nxp_adsp/imx8/Kconfig.defconfig.series:42

Included via <Zephyr>/Kconfig:8 → <Zephyr>/Kconfig.zephyr:27 → <Zephyr>/soc/xtensa/nxp_adsp/Kconfig.defconfig:6

Menu path: (Top)

config DYNAMIC_INTERRUPTS
    bool
    default y
    depends on SOC_SERIES_NXP_IMX8

At <Zephyr>/soc/xtensa/nxp_adsp/imx8m/Kconfig.defconfig.series:42

Included via <Zephyr>/Kconfig:8 → <Zephyr>/Kconfig.zephyr:27 → <Zephyr>/soc/xtensa/nxp_adsp/Kconfig.defconfig:6

Menu path: (Top)

config DYNAMIC_INTERRUPTS
    bool
    default y
    depends on SOC_SERIES_NXP_IMX8M

At <Zephyr>/arch/Kconfig:367

Included via <Zephyr>/Kconfig:8 → <Zephyr>/Kconfig.zephyr:39

Menu path: (Top) → General Architecture Options → Interrupt Configuration

config DYNAMIC_INTERRUPTS
    bool "Enable installation of IRQs at runtime"
    help
      Enable installation of interrupts at runtime, which will move some
      interrupt-related data structures to RAM instead of ROM, and
      on some architectures increase code size.

(The ‘depends on’ condition includes propagated dependencies from ifs and menus.)

CONFIG_DYNAMIC_INTERRUPTS

Help

Defaults

Symbols that select this symbol

Kconfig definitions