CONFIG_D0WD_PSRAM_CLK_IO
PSRAM CLK IO number
PSRAM CLK IO number
Type: int
Help
The PSRAM CLOCK IO can be any unused GPIO, user can config it based on hardware design. If user use
1.8V flash and 1.8V psram, this value can only be one of 6, 7, 8, 9, 10, 11, 16, 17.
Help
The PSRAM CLOCK IO can be any unused GPIO, user can config it based on hardware design. If user use
1.8V flash and 1.8V psram, this value can only be one of 6, 7, 8, 9, 10, 11, 16, 17.
Direct dependencies
(ESP_SPIRAM
&& SOC_ESP32
&& <choice: SoC/CPU/Configuration Selection>) || (ESP_SPIRAM
&& SOC_ESP32
&& <choice: SoC/CPU/Configuration Selection>)
(Includes any dependencies from ifs and menus.)
Defaults
17
17
Kconfig definitions
At <Zephyr>/soc/xtensa/esp32/Kconfig.soc:118
Included via <Zephyr>/Kconfig:8
→ <Zephyr>/Kconfig.zephyr:38
→ <Zephyr>/soc/Kconfig:7
→ <nRF>/doc/_build/kconfig/Kconfig.soc:1
Menu path: (Top) → SoC/CPU/Configuration Selection → ESP32 → Support for external, SPI-connected RAM → SPI RAM config → PSRAM clock and cs IO for ESP32-DOWD
config D0WD_PSRAM_CLK_IO
int "PSRAM CLK IO number"
range 0 33
default 17
depends on ESP_SPIRAM && SOC_ESP32 && <choice>
help
The PSRAM CLOCK IO can be any unused GPIO, user can config it based on hardware design. If user use
1.8V flash and 1.8V psram, this value can only be one of 6, 7, 8, 9, 10, 11, 16, 17.
At <Zephyr>/soc/xtensa/esp32/Kconfig.soc:118
Included via <Zephyr>/Kconfig:8
→ <Zephyr>/Kconfig.zephyr:38
→ <Zephyr>/soc/Kconfig:9
Menu path: (Top) → SoC/CPU/Configuration Selection → ESP32 → Support for external, SPI-connected RAM → SPI RAM config → PSRAM clock and cs IO for ESP32-DOWD
config D0WD_PSRAM_CLK_IO
int "PSRAM CLK IO number"
range 0 33
default 17
depends on ESP_SPIRAM && SOC_ESP32 && <choice>
help
The PSRAM CLOCK IO can be any unused GPIO, user can config it based on hardware design. If user use
1.8V flash and 1.8V psram, this value can only be one of 6, 7, 8, 9, 10, 11, 16, 17.
(The ‘depends on’ condition includes propagated dependencies from ifs and menus.)