CONFIG_BT_WAIT_NOP

Wait for “NOP” Command Complete event during init

Type: bool

Help

Emit a Command Complete event from the Controller (and wait for it
from the Host) for the NOP opcode to indicate that the Controller is
ready to receive commands.

Help

Emit a Command Complete event from the Controller (and wait for it
from the Host) for the NOP opcode to indicate that the Controller is
ready to receive commands.

Direct dependencies

BOARD_NRF9160DK_NRF52840 || BOARD_NRF9160DK_NRF9160 || BOARD_NRF9160DK_NRF9160_NS || BT_RPC_STACK || (BT_HCI && BT)

(Includes any dependencies from ifs and menus.)

Defaults

BT && n
BT && n

Kconfig definitions

At <Zephyr>/boards/arm/nrf9160dk_nrf52840/Kconfig.defconfig:14

Included via <Zephyr>/Kconfig:8 → <Zephyr>/Kconfig.zephyr:22

Menu path: (Top)

config BT_WAIT_NOP
    bool
    default BT && n
    depends on BOARD_NRF9160DK_NRF52840

At <Zephyr>/boards/arm/nrf9160dk_nrf9160/Kconfig.defconfig:51

Included via <Zephyr>/Kconfig:8 → <Zephyr>/Kconfig.zephyr:22

Menu path: (Top)

config BT_WAIT_NOP
    bool
    default BT && n
    depends on BOARD_NRF9160DK_NRF9160 || BOARD_NRF9160DK_NRF9160_NS

At <Zephyr>/subsys/bluetooth/common/Kconfig:229

Included via <Zephyr>/Kconfig:8 → <Zephyr>/Kconfig.zephyr:33 → <Zephyr>/modules/Kconfig:6 → <nRF>/doc/_build/kconfig/Kconfig.modules:2 → <nRF>/Kconfig.nrf:92 → <nRF>/subsys/Kconfig:10 → <nRF>/subsys/bluetooth/Kconfig:38 → <nRF>/subsys/bluetooth/rpc/Kconfig:195

Menu path: (Top) → Modules → nrf (/home/runner/work/sdk-nrf/sdk-nrf/ncs/nrf) → Nordic nRF Connect → Bluetooth Low Energy → BLE over nRF RPC

config BT_WAIT_NOP
    bool "Wait for \"NOP\" Command Complete event during init"
    depends on BT_RPC_STACK
    help
      Emit a Command Complete event from the Controller (and wait for it
      from the Host) for the NOP opcode to indicate that the Controller is
      ready to receive commands.

At <Zephyr>/subsys/bluetooth/common/Kconfig:229

Included via <Zephyr>/Kconfig:8 → <Zephyr>/Kconfig.zephyr:44 → <Zephyr>/subsys/Kconfig:9 → <Zephyr>/subsys/bluetooth/Kconfig:179

Menu path: (Top) → Sub Systems and OS Services → Bluetooth

config BT_WAIT_NOP
    bool "Wait for \"NOP\" Command Complete event during init"
    depends on BT_HCI && BT
    help
      Emit a Command Complete event from the Controller (and wait for it
      from the Host) for the NOP opcode to indicate that the Controller is
      ready to receive commands.

(The ‘depends on’ condition includes propagated dependencies from ifs and menus.)