CONFIG_BT_MESH_RX_SEG_MAX
Maximum number of segments in incoming messages
Type: int
Help
Maximum number of segments supported for incoming messages.
This value should typically be fine-tuned based on what
models the local node supports, i.e. what's the largest
message payload that the node needs to be able to receive.
This value affects memory and call stack consumption, which
is why the default is lower than the maximum that the
specification would allow (32 segments).
The maximum incoming SDU size is 12 times this number (out of
which 4 or 8 bytes is used for the Transport Layer MIC). For
example, 5 segments means the maximum SDU size is 60 bytes,
which leaves 56 bytes for application layer data using a
4-byte MIC and 52 bytes using an 8-byte MIC.
Direct dependencies
(Includes any dependencies from ifs and menus.)
Default
3
Kconfig definition
At <Zephyr>/subsys/bluetooth/mesh/Kconfig:412
Included via <Zephyr>/Kconfig:8 → <Zephyr>/Kconfig.zephyr:44 → <Zephyr>/subsys/Kconfig:9 → <Zephyr>/subsys/bluetooth/Kconfig:199
Menu path: (Top) → Sub Systems and OS Services → Bluetooth → Bluetooth mesh support [EXPERIMENTAL]
config BT_MESH_RX_SEG_MAX
int "Maximum number of segments in incoming messages"
range 2 32
default 3
depends on BT_MESH && BT
help
Maximum number of segments supported for incoming messages.
This value should typically be fine-tuned based on what
models the local node supports, i.e. what's the largest
message payload that the node needs to be able to receive.
This value affects memory and call stack consumption, which
is why the default is lower than the maximum that the
specification would allow (32 segments).
The maximum incoming SDU size is 12 times this number (out of
which 4 or 8 bytes is used for the Transport Layer MIC). For
example, 5 segments means the maximum SDU size is 60 bytes,
which leaves 56 bytes for application layer data using a
4-byte MIC and 52 bytes using an 8-byte MIC.
(The ‘depends on’ condition includes propagated dependencies from ifs and menus.)