CONFIG_BT_MESH_LIGHT_CTRL_SRV_REG_ACCURACY

Default accuracy (percent)

Type: int

Help

Default value for the regulator's accuracy (in percent). The accuracy
determines the regulator's dead zone around the target value, where
no corrections are made for fluctuating sensor values. The accuracy
should account for both sensor inaccuracies and system instability,
to avoid making constant adjustments. May be reconfigured at runtime
by other models in the mesh network.

Direct dependencies

BT_MESH_LIGHT_CTRL_SRV_REG && BT_MESH_LIGHT_CTRL_SRV && BT_MESH && BT

(Includes any dependencies from ifs and menus.)

Default

  • 2

Kconfig definition

At <nRF>/subsys/bluetooth/mesh/Kconfig.models:363

Included via <Zephyr>/Kconfig:8<Zephyr>/Kconfig.zephyr:33<Zephyr>/modules/Kconfig:6<nRF>/doc/_build/kconfig/Kconfig.modules:2<nRF>/Kconfig.nrf:92<nRF>/subsys/Kconfig:10<nRF>/subsys/bluetooth/Kconfig:30<nRF>/subsys/bluetooth/mesh/Kconfig:11

Menu path: (Top) → Modules → nrf (/home/runner/work/sdk-nrf/sdk-nrf/ncs/nrf) → Nordic nRF Connect → Bluetooth Low Energy → Bluetooth mesh → nRF BT mesh models → Light Lightness Control (LC) Server → Lightness Regulator

config BT_MESH_LIGHT_CTRL_SRV_REG_ACCURACY
    int "Default accuracy (percent)"
    range 0 100
    default 2
    depends on BT_MESH_LIGHT_CTRL_SRV_REG && BT_MESH_LIGHT_CTRL_SRV && BT_MESH && BT
    help
      Default value for the regulator's accuracy (in percent). The accuracy
      determines the regulator's dead zone around the target value, where
      no corrections are made for fluctuating sensor values. The accuracy
      should account for both sensor inaccuracies and system instability,
      to avoid making constant adjustments. May be reconfigured at runtime
      by other models in the mesh network.

(The ‘depends on’ condition includes propagated dependencies from ifs and menus.)