nxp,lpc-lpadc

Description

LPC LPADC

Properties

Properties not inherited from the base binding file.

Name	Type	Details
`clk-divider`	`int`	clock divider for the converter This property is required.
`clk-source`	`int`	source to attach the ADC clock to This property is required.
`voltage-ref`	`int`	reference voltage source This property is required.
`calibration-average`	`int`	conversion average number for auto-calibration This property is required.
`power-level`	`int`	power level for the ADC This property is required.
`offset-value-a`	`int`	Offset value A to use if CONFIG_LPADC_DO_OFFSET_CALIBRATION is false This property is required.
`offset-value-b`	`int`	Offset value B to use if CONFIG_LPADC_DO_OFFSET_CALIBRATION is false This property is required.
`#io-channel-cells`	`int`	This property is required. Constant value: `1`

Properties inherited from the base binding file, which defines common properties that may be set on many nodes. Not all of these may apply to the “nxp,lpc-lpadc” compatible.

Name	Type	Details
`reg`	`array`	register space This property is required. See Important properties for more information.
`interrupts`	`array`	interrupts for device This property is required. See Important properties for more information.
`label`	`string`	Human readable string describing the device (used as device_get_binding() argument) This property is required. See Important properties for more information.
`status`	`string`	indicates the operational status of a device Legal values: `'ok'`, `'okay'`, `'disabled'`, `'reserved'`, `'fail'`, `'fail-sss'` See Important properties for more information.
`compatible`	`string-array`	compatible strings This property is required. See Important properties for more information.
`reg-names`	`string-array`	name of each register space
`interrupts-extended`	`compound`	extended interrupt specifier for device
`interrupt-names`	`string-array`	name of each interrupt
`interrupt-parent`	`phandle`	phandle to interrupt controller node
`clocks`	`phandle-array`	Clock gate information
`clock-names`	`string-array`	name of each clock
`#address-cells`	`int`	number of address cells in reg property
`#size-cells`	`int`	number of size cells in reg property
`dmas`	`phandle-array`	DMA channels specifiers
`dma-names`	`string-array`	Provided names of DMA channel specifiers
`io-channels`	`phandle-array`	IO channels specifiers
`io-channel-names`	`string-array`	Provided names of IO channel specifiers
`mboxes`	`phandle-array`	mailbox / IPM channels specifiers
`mbox-names`	`string-array`	Provided names of mailbox / IPM channel specifiers
`wakeup-source`	`boolean`	Property to identify that a device can be used as wake up source. When this property is provided a specific flag is set into the device that tells the system that the device is capable of wake up the system. Wake up capable devices are disabled (interruptions will not wake up the system) by default but they can be enabled at runtime if necessary.

Specifier cell names

io-channel cells: input