silabs,gecko-ethernet

Vendor: Silicon Laboratories

Description

SiLabs Gecko Ethernet

Properties

Node specific propertiesDeprecated node specific propertiesBase properties

Properties not inherited from the base binding file.

Name	Type	Details
phy-address	int	address of the PHY on the MDIO bus This property is required.
location-rmii	int	location of RMII pins, configuration defined as <location> This property is required.
location-mdio	int	location of MDC and MDIO pins, configuration defined as <location> This property is required.
location-phy_mdc	array	PHY MDC individual pin configuration defined as <location port pin> This property is required.
location-phy_mdio	array	PHY MDIO individual pin configuration defined as <location port pin> This property is required.
location-rmii_refclk	array	Reference clock individual pin configuration defined as <location port pin> This property is required.
location-rmii_crs_dv	array	Receive data valid individual pin configuration defined as <location port pin> This property is required.
location-rmii_txd0	array	Transmit data 0 individual pin configuration defined as <location port pin> This property is required.
location-rmii_txd1	array	Transmit data 1 individual pin configuration defined as <location port pin> This property is required.
location-rmii_tx_en	array	Transmit enable individual pin configuration defined as <location port pin> This property is required.
location-rmii_rxd0	array	Receive data 0 individual pin configuration defined as <location port pin> This property is required.
location-rmii_rxd1	array	Receive data 1 individual pin configuration defined as <location port pin> This property is required.
location-rmii_rx_er	array	Receive error individual pin configuration defined as <location port pin> This property is required.
location-phy_pwr_enable	array	PHY power enable individual pin configuration defined as <port pin>
location-phy_reset	array	PHY reset individual pin configuration defined as <port pin>
location-phy_interrupt	array	PHY interrupt individual pin configuration defined as <port pin>
local-mac-address	uint8-array	Specifies the MAC address that was assigned to the network device
zephyr,random-mac-address	boolean	Use a random MAC address generated when the driver is initialized. Note that using this choice and rebooting a board may leave stale MAC address in peers' ARP caches and lead to issues and delays in communication. (Use "ip neigh flush all" on Linux peers to clear ARP cache.) It is driver specific how the OUI octets are handled. If set we ignore any setting of the local-mac-address property.