nuvoton,npcx-pcc
Vendor: Nuvoton Technology Corporation
Description
Nuvoton, NPCX PCC (Power and Clock Controller) node.
Besides power management, this node is also in charge of configuring the
Oscillator Frequency Multiplier Clock (OFMCLK), which is derived from
High-Frequency Clock Generator (HFCG), is the source clock of Cortex-M4 core
and most of NPCX hardware modules.
Here is an example of configuring OFMCLK and the other clock sources derived
from it in board dts file.
&pcc {
clock-frequency = <DT_FREQ_M(100)>; /* OFMCLK runs at 100MHz */
core-prescaler = <5>; /* CORE_CLK runs at 20MHz */
apb1-prescaler = <5>; /* APB1_CLK runs at 20MHz */
apb2-prescaler = <5>; /* APB2_CLK runs at 20MHz */
apb3-prescaler = <5>; /* APB3_CLK runs at 20MHz */
};
Properties
Properties not inherited from the base binding file.
Name |
Type |
Details |
---|---|---|
|
|
Default frequency in Hz for HFCG output clock (OFMCLK). Currently,
only the following values are allowed:
100000000, 100 MHz
96000000, 96 MHz
90000000, 90 MHz
80000000, 80 MHz
66000000, 66 MHz
50000000, 50 MHz
48000000, 48 MHz
40000000, 40 MHz (default value after reset)
33000000, 33 MHz
This property is required. Legal values: |
|
|
Core clock prescaler (FPRED). It sets the Core frequency, CORE_CLK, by
dividing OFMCLK(MCLK) and needs to meet the following requirements.
- CORE_CLK must be set to 4MHz <= CORE_CLK <= 100MHz.
= Only the following values are allowed:
1, CORE_CLK = OFMCLK
2, CORE_CLK = OFMCLK / 2
3, CORE_CLK = OFMCLK / 3
4, CORE_CLK = OFMCLK / 4
5, CORE_CLK = OFMCLK / 5
6, CORE_CLK = OFMCLK / 6
7, CORE_CLK = OFMCLK / 7
8, CORE_CLK = OFMCLK / 8
9, CORE_CLK = OFMCLK / 9
10, CORE_CLK = OFMCLK / 10
This property is required. Legal values: |
|
|
APB1 prescaler. It sets the APB1 bus frequency, APB1_CLK, by dividing
OFMCLK(MCLK) and needs to meet the following requirements.
- APB1_CLK must be set to 4MHz <= APB1_CLK <= 50MHz.
- APB1_CLK must be an integer division (including 1) of CORE_CLK.
= Only the following values are allowed:
1, APB1_CLK = OFMCLK
2, APB1_CLK = OFMCLK / 2
3, APB1_CLK = OFMCLK / 3
4, APB1_CLK = OFMCLK / 4
5, APB1_CLK = OFMCLK / 5
6, APB1_CLK = OFMCLK / 6
7, APB1_CLK = OFMCLK / 7
8, APB1_CLK = OFMCLK / 8
9, APB1_CLK = OFMCLK / 9
10, APB1_CLK = OFMCLK / 10
This property is required. Legal values: |
|
|
APB2 prescaler. It sets the APB2 bus frequency, APB2_CLK, by dividing
OFMCLK(MCLK) and needs to meet the following requirements.
- APB2_CLK must be set to 8MHz <= APB2_CLK <= 50MHz.
- APB2_CLK must be an integer division (including 1) of CORE_CLK.
= Only the following values are allowed:
1, APB2_CLK = OFMCLK
2, APB2_CLK = OFMCLK / 2
3, APB2_CLK = OFMCLK / 3
4, APB2_CLK = OFMCLK / 4
5, APB2_CLK = OFMCLK / 5
6, APB2_CLK = OFMCLK / 6
7, APB2_CLK = OFMCLK / 7
8, APB2_CLK = OFMCLK / 8
9, APB2_CLK = OFMCLK / 9
10, APB2_CLK = OFMCLK / 10
This property is required. Legal values: |
|
|
APB3 prescaler. It sets the APB3 bus frequency, APB3_CLK, by dividing
OFMCLK(MCLK) and needs to meet the following requirements.
- APB3_CLK must be set to 12.5MHz <= APB3_CLK <= 50MHz.
- APB3_CLK must be an integer division (including 1) of CORE_CLK.
= Only the following values are allowed:
1, APB3_CLK = OFMCLK
2, APB3_CLK = OFMCLK / 2
3, APB3_CLK = OFMCLK / 3
4, APB3_CLK = OFMCLK / 4
5, APB3_CLK = OFMCLK / 5
6, APB3_CLK = OFMCLK / 6
7, APB3_CLK = OFMCLK / 7
8, APB3_CLK = OFMCLK / 8
9, APB3_CLK = OFMCLK / 9
10, APB3_CLK = OFMCLK / 10
This property is required. Legal values: |
|
|
APB4 prescaler. It sets the APB4 bus frequency, APB4_CLK, by dividing
OFMCLK(MCLK) and needs to meet the following requirements.
- APB4_CLK must be set to 8MHz <= APB4_CLK <= 50MHz.
- APB4_CLK must be an integer division (including 1) of CORE_CLK.
= Only the following values are allowed:
1, APB4_CLK = OFMCLK
2, APB4_CLK = OFMCLK / 2
3, APB4_CLK = OFMCLK / 3
4, APB4_CLK = OFMCLK / 4
5, APB4_CLK = OFMCLK / 5
6, APB4_CLK = OFMCLK / 6
7, APB4_CLK = OFMCLK / 7
8, APB4_CLK = OFMCLK / 8
9, APB4_CLK = OFMCLK / 9
10, APB4_CLK = OFMCLK / 10
Legal values: |
|
|
Valid bit-depth of RAM block Power-Down control (RAM_PD) registers.
Each bit in RAM_PDn can power down the relevant RAM block by setting
itself to 1 for better power consumption and this valid bit-depth
varies in different NPCX series.
Legal values: |
|
|
Number of items to expect in a Clock specifier
This property is required. |
Deprecated properties not inherited from the base binding file.
(None)
Properties inherited from the base binding file, which defines common properties that may be set on many nodes. Not all of these may apply to the “nuvoton,npcx-pcc” compatible.
Name |
Type |
Details |
---|---|---|
|
|
register space
This property is required. See Important properties for more information. |
|
|
indicates the operational status of a device
Legal values: See Important properties for more information. |
|
|
compatible strings
This property is required. See Important properties for more information. |
|
|
name of each register space
|
|
|
interrupts for device
See Important properties for more information. |
|
|
extended interrupt specifier for device
|
|
|
name of each interrupt
|
|
|
phandle to interrupt controller node
|
|
|
Human readable string describing the device (used as device_get_binding() argument)
See Important properties for more information. |
|
|
Clock gate information
|
|
|
name of each clock
|
|
|
number of address cells in reg property
|
|
|
number of size cells in reg property
|
|
|
DMA channels specifiers
|
|
|
Provided names of DMA channel specifiers
|
|
|
IO channels specifiers
|
|
|
Provided names of IO channel specifiers
|
|
|
mailbox / IPM channels specifiers
|
|
|
Provided names of mailbox / IPM channel specifiers
|
|
|
Property to identify that a device can be used as wake up source.
When this property is provided a specific flag is set into the
device that tells the system that the device is capable of
wake up the system.
Wake up capable devices are disabled (interruptions will not wake up
the system) by default but they can be enabled at runtime if necessary.
|
Specifier cell names
clock cells: bus, ctl, bit