CCM HAL

group nrf_ccm_hal

Hardware access layer for managing the AES CCM peripheral.

Enums

enum nrf_ccm_task_t

CCM tasks.

Values:

enumerator NRF_CCM_TASK_KSGEN: Start generation of key-stream.

enumerator NRF_CCM_TASK_CRYPT: Start encryption/decryption.

enumerator NRF_CCM_TASK_STOP: Stop encryption/decryption.

enumerator NRF_CCM_TASK_RATEOVERRIDE: Override DATARATE setting in MODE register.

enum nrf_ccm_event_t

CCM events.

Values:

enumerator NRF_CCM_EVENT_ENDKSGEN: Keystream generation complete.

enumerator NRF_CCM_EVENT_ENDCRYPT: Encrypt/decrypt complete.

enumerator NRF_CCM_EVENT_ERROR: CCM error event.

enum nrf_ccm_short_mask_t

Types of CCM shorts.

Values:

enumerator NRF_CCM_SHORT_ENDKSGEN_CRYPT_MASK: Shortcut for starting encryption/decryption when the key-stream generation is complete.

enum nrf_ccm_int_mask_t

CCM interrupts.

Values:

enumerator NRF_CCM_INT_ENDKSGEN_MASK: Interrupt on ENDKSGEN event.

enumerator NRF_CCM_INT_ENDCRYPT_MASK: Interrupt on ENDCRYPT event.

enumerator NRF_CCM_INT_ERROR_MASK: Interrupt on ERROR event.

enum nrf_ccm_mode_t

CCM modes of operation.

Values:

enumerator NRF_CCM_MODE_ENCRYPTION: Encryption mode.

enumerator NRF_CCM_MODE_DECRYPTION: Decryption mode.

enum nrf_ccm_datarate_t

CCM data rates.

Values:

enumerator NRF_CCM_DATARATE_1M: 1 Mbps.

enumerator NRF_CCM_DATARATE_2M: 2 Mbps.

enumerator NRF_CCM_DATARATE_125K: 125 Kbps.

enumerator NRF_CCM_DATARATE_500K: 500 Kbps.

enum nrf_ccm_length_t

CCM packet length options.

Values:

enumerator NRF_CCM_LENGTH_DEFAULT: Default length.

enumerator NRF_CCM_LENGTH_EXTENDED: Extended length.

Functions

NRF_STATIC_INLINE void nrf_ccm_task_trigger(NRF_CCM_Type *p_reg, nrf_ccm_task_t task)

Function for activating a specific CCM task.

Parameters

p_reg – [in] Pointer to the structure of registers of the peripheral.
task – [in] Task to be activated.

NRF_STATIC_INLINE uint32_t nrf_ccm_task_address_get(NRF_CCM_Type const *p_reg, nrf_ccm_task_t task)

Function for getting the address of a specific CCM task register.

Parameters

p_reg – [in] Pointer to the structure of registers of the peripheral.
task – [in] Requested task.

Returns

Address of the specified task register.

NRF_STATIC_INLINE void nrf_ccm_event_clear(NRF_CCM_Type *p_reg, nrf_ccm_event_t event)

Function for clearing a specific CCM event.

Parameters

p_reg – [in] Pointer to the structure of registers of the peripheral.
event – [in] Event to clear.

NRF_STATIC_INLINE bool nrf_ccm_event_check(NRF_CCM_Type const *p_reg, nrf_ccm_event_t event)

Function for retrieving the state of a specific CCM event.

Parameters

p_reg – [in] Pointer to the structure of registers of the peripheral.
event – [in] Event to be checked.

Return values

true – The event has been generated.
false – The event has not been generated.

NRF_STATIC_INLINE uint32_t nrf_ccm_event_address_get(NRF_CCM_Type const *p_reg, nrf_ccm_event_t event)

Function for getting the address of a specific CCM event register.

Parameters

p_reg – [in] Pointer to the structure of registers of the peripheral.
event – [in] Requested event.

Returns

Address of the specified event register.

NRF_STATIC_INLINE void nrf_ccm_shorts_enable(NRF_CCM_Type *p_reg, uint32_t mask)

Function for enabling the specified shortcuts.

Parameters

p_reg – [in] Pointer to the structure of registers of the peripheral.
mask – [in] Shortcuts to be enabled.

NRF_STATIC_INLINE void nrf_ccm_shorts_disable(NRF_CCM_Type *p_reg, uint32_t mask)

Function for disabling the specified shortcuts.

Parameters

p_reg – [in] Pointer to the structure of registers of the peripheral.
mask – [in] Shortcuts to be disabled.

NRF_STATIC_INLINE void nrf_ccm_shorts_set(NRF_CCM_Type *p_reg, uint32_t mask)

Function for setting the specified shortcuts.

Parameters

p_reg – [in] Pointer to the structure of registers of the peripheral.
mask – [in] Shortcuts to be set.

NRF_STATIC_INLINE void nrf_ccm_int_enable(NRF_CCM_Type *p_reg, uint32_t mask)

Function for enabling specified interrupts.

Parameters

p_reg – [in] Pointer to the structure of registers of the peripheral.
mask – [in] Interrupts to be enabled.

NRF_STATIC_INLINE void nrf_ccm_int_disable(NRF_CCM_Type *p_reg, uint32_t mask)

Function for disabling specified interrupts.

Parameters

p_reg – [in] Pointer to the structure of registers of the peripheral.
mask – [in] Interrupts to be disabled.

NRF_STATIC_INLINE uint32_t nrf_ccm_int_enable_check(NRF_CCM_Type const *p_reg, uint32_t mask)

Function for checking if the specified interrupts are enabled.

Parameters

p_reg – [in] Pointer to the structure of registers of the peripheral.
mask – [in] Mask of interrupts to be checked.

Returns

Mask of enabled interrupts.

NRF_STATIC_INLINE void nrf_ccm_enable(NRF_CCM_Type *p_reg)

Function for enabling the CCM peripheral.

Parameters

p_reg – [in] Pointer to the structure of registers of the peripheral.

NRF_STATIC_INLINE void nrf_ccm_disable(NRF_CCM_Type *p_reg)

Function for disabling the CCM peripheral.

Parameters

p_reg – [in] Pointer to the structure of registers of the peripheral.

NRF_STATIC_INLINE void nrf_ccm_configure(NRF_CCM_Type *p_reg, nrf_ccm_config_t const *p_config)

Function for setting the CCM peripheral configuration.

Parameters

p_reg – [in] Pointer to the structure of registers of the peripheral.
p_config – [in] Pointer to the structure with configuration to be set.

NRF_STATIC_INLINE void nrf_ccm_maxpacketsize_set(NRF_CCM_Type *p_reg, uint8_t size)

Function for setting the length of key-stream generated when the packet length is configured as extended.

Parameters

p_reg – [in] Pointer to the structure of registers of the peripheral.
size – [in] Maximum length of the key-stream.

NRF_STATIC_INLINE bool nrf_ccm_micstatus_get(NRF_CCM_Type const *p_reg)

Function for getting the MIC check result.

Parameters

p_reg – [in] Pointer to the structure of registers of the peripheral.

Return values

true – The MIC check passed.
false – The MIC check failed.

NRF_STATIC_INLINE void nrf_ccm_cnfptr_set(NRF_CCM_Type *p_reg, uint32_t const *p_data)

Function for setting the pointer to the data structure holding the AES key and the CCM NONCE vector.

Parameters

p_reg – [in] Pointer to the structure of registers of the peripheral.
p_data – [in] Pointer to the data structure.

NRF_STATIC_INLINE uint32_t *nrf_ccm_cnfptr_get(NRF_CCM_Type const *p_reg)

Function for getting the pointer to the data structure holding the AES key and the CCM NONCE vector.

Parameters

p_reg – [in] Pointer to the structure of registers of the peripheral.

Returns

Pointer to the data structure.

NRF_STATIC_INLINE void nrf_ccm_inptr_set(NRF_CCM_Type *p_reg, uint32_t const *p_data)

Function for setting the input data pointer.

Parameters

p_reg – [in] Pointer to the structure of registers of the peripheral.
p_data – [in] Input data pointer.

NRF_STATIC_INLINE uint32_t *nrf_ccm_inptr_get(NRF_CCM_Type const *p_reg)

Function for getting the input data pointer.

Parameters

p_reg – [in] Pointer to the structure of registers of the peripheral.

Returns

Input data pointer.

NRF_STATIC_INLINE void nrf_ccm_outptr_set(NRF_CCM_Type *p_reg, uint32_t const *p_data)

Function for setting the output data pointer.

Parameters

p_reg – [in] Pointer to the structure of registers of the peripheral.
p_data – [in] Output data pointer.

NRF_STATIC_INLINE uint32_t *nrf_ccm_outptr_get(NRF_CCM_Type const *p_reg)

Function for getting the output data pointer.

Parameters

p_reg – [in] Pointer to the structure of registers of the peripheral.

Returns

Output data pointer.

NRF_STATIC_INLINE void nrf_ccm_scratchptr_set(NRF_CCM_Type *p_reg, uint32_t const *p_area)

Function for setting the pointer to the scratch area used for temporary storage.

Parameters

p_reg – [in] Pointer to the structure of registers of the peripheral.
p_area – [in] Pointer to the scratch area.

NRF_STATIC_INLINE uint32_t *nrf_ccm_stratchptr_get(NRF_CCM_Type const *p_reg)

Function for getting the pointer to the scratch area.

Parameters

p_reg – [in] Pointer to the structure of registers of the peripheral.

Returns

Pointer to the scratch area.

NRF_STATIC_INLINE void nrf_ccm_datarate_override_set(NRF_CCM_Type *p_reg, nrf_ccm_datarate_t datarate)

Function for setting the data rate override value.

Parameters

p_reg – [in] Pointer to the structure of registers of the peripheral.
datarate – [in] Override value to be applied when the RATEOVERRIDE task is triggered.

NRF_STATIC_INLINE void nrf_ccm_subscribe_set(NRF_CCM_Type *p_reg, nrf_ccm_task_t task, uint8_t channel)

Function for setting the subscribe configuration for a given CCM task.

Parameters

p_reg – [in] Pointer to the structure of registers of the peripheral.
task – [in] Task for which to set the configuration.
channel – [in] Channel through which to subscribe events.

NRF_STATIC_INLINE void nrf_ccm_subscribe_clear(NRF_CCM_Type *p_reg, nrf_ccm_task_t task)

Function for clearing the subscribe configuration for a given CCM task.

Parameters

p_reg – [in] Pointer to the structure of registers of the peripheral.
task – [in] Task for which to clear the configuration.

NRF_STATIC_INLINE void nrf_ccm_publish_set(NRF_CCM_Type *p_reg, nrf_ccm_event_t event, uint8_t channel)

Function for setting the publish configuration for a given CCM event.

Parameters

p_reg – [in] Pointer to the structure of registers of the peripheral.
event – [in] Event for which to set the configuration.
channel – [in] Channel through which to publish the event.

NRF_STATIC_INLINE void nrf_ccm_publish_clear(NRF_CCM_Type *p_reg, nrf_ccm_event_t event)

Function for clearing the publish configuration for a given CCM event.

Parameters

p_reg – [in] Pointer to the structure of registers of the peripheral.
event – [in] Event for which to clear the configuration.

struct nrf_ccm_config_t

#include <>

CCM configuration.

Public Members

nrf_ccm_mode_t mode: Operation mode.

nrf_ccm_datarate_t datarate: Data rate.

nrf_ccm_length_t length: Lenght of the CCM packet.