CONFIG_UART_NPCX

Nuvoton NPCX embedded controller (EC) serial driver

Type: bool

Help

Enable support for NPCX UART driver.

Help

Enable support for NPCX UART driver. In NPCX9 series, it includes 4
modules which support full-duplex asynchronous receiver-transmitter
with 16-byte transmit and receive buffers.

Help

Enable support for NPCX UART driver.

Help

Enable support for NPCX UART driver. In NPCX9 series, it includes 4
modules which support full-duplex asynchronous receiver-transmitter
with 16-byte transmit and receive buffers.

Help

This option enables the UART driver for NPCX family of
processors.
Say y if you wish to use serial port on NPCX MCU.

Direct dependencies

(SERIAL && SOC_SERIES_NPCX7) || (SERIAL && SOC_SERIES_NPCX9) || (SERIAL && SOC_SERIES_NPCX7) || (SERIAL && SOC_SERIES_NPCX9) || (SOC_FAMILY_NPCX && SERIAL)

(Includes any dependencies from ifs and menus.)

Defaults

y
y
y
y

Symbols selected by this symbol

Kconfig definitions

At <Zephyr>/soc/arm/nuvoton_npcx/npcx7/Kconfig.defconfig.series:25

Included via <Zephyr>/Kconfig:8 → <Zephyr>/Kconfig.zephyr:25 → <nRF>/doc/_build/kconfig/Kconfig.soc.defconfig:1 → <Zephyr>/soc/arm/nuvoton_npcx/Kconfig.defconfig:6

Menu path: (Top)

config UART_NPCX
    bool
    default y
    depends on SERIAL && SOC_SERIES_NPCX7
    help
      Enable support for NPCX UART driver.

At <Zephyr>/soc/arm/nuvoton_npcx/npcx9/Kconfig.defconfig.series:28

Included via <Zephyr>/Kconfig:8 → <Zephyr>/Kconfig.zephyr:25 → <nRF>/doc/_build/kconfig/Kconfig.soc.defconfig:1 → <Zephyr>/soc/arm/nuvoton_npcx/Kconfig.defconfig:6

Menu path: (Top)

config UART_NPCX
    bool
    default y
    depends on SERIAL && SOC_SERIES_NPCX9
    help
      Enable support for NPCX UART driver. In NPCX9 series, it includes 4
      modules which support full-duplex asynchronous receiver-transmitter
      with 16-byte transmit and receive buffers.

At <Zephyr>/soc/arm/nuvoton_npcx/npcx7/Kconfig.defconfig.series:25

Included via <Zephyr>/Kconfig:8 → <Zephyr>/Kconfig.zephyr:27 → <Zephyr>/soc/arm/nuvoton_npcx/Kconfig.defconfig:6

Menu path: (Top)

config UART_NPCX
    bool
    default y
    depends on SERIAL && SOC_SERIES_NPCX7
    help
      Enable support for NPCX UART driver.

At <Zephyr>/soc/arm/nuvoton_npcx/npcx9/Kconfig.defconfig.series:28

Included via <Zephyr>/Kconfig:8 → <Zephyr>/Kconfig.zephyr:27 → <Zephyr>/soc/arm/nuvoton_npcx/Kconfig.defconfig:6

Menu path: (Top)

config UART_NPCX
    bool
    default y
    depends on SERIAL && SOC_SERIES_NPCX9
    help
      Enable support for NPCX UART driver. In NPCX9 series, it includes 4
      modules which support full-duplex asynchronous receiver-transmitter
      with 16-byte transmit and receive buffers.

At <Zephyr>/drivers/serial/Kconfig.npcx:6

Included via <Zephyr>/Kconfig:8 → <Zephyr>/Kconfig.zephyr:42 → <Zephyr>/drivers/Kconfig:26 → <Zephyr>/drivers/serial/Kconfig:172

Menu path: (Top) → Device Drivers → Serial Drivers

config UART_NPCX
    bool "Nuvoton NPCX embedded controller (EC) serial driver"
    select SERIAL_HAS_DRIVER
    select SERIAL_SUPPORT_INTERRUPT
    depends on SOC_FAMILY_NPCX && SERIAL
    help
      This option enables the UART driver for NPCX family of
      processors.
      Say y if you wish to use serial port on NPCX MCU.

(The ‘depends on’ condition includes propagated dependencies from ifs and menus.)