CONFIG_SPI_DW_FIFO_DEPTH

RX and TX FIFO Depth

Type: int

Help

Corresponds to the SSI_TX_FIFO_DEPTH and
SSI_RX_FIFO_DEPTH of the DesignWare Synchronous
Serial Interface. Depth ranges from 2-256.

Direct dependencies

(SPI_DW && SPI && BOARD_EM_STARTERKIT) || (SPI_DW && SPI && BOARD_HSDK) || SOC_INTEL_S1000 || SOC_INTEL_S1000 || (SPI_DW && SPI)

(Includes any dependencies from ifs and menus.)

Defaults

32
32
32
32

Kconfig definitions

At <Zephyr>/boards/arc/em_starterkit/Kconfig.defconfig:59

Included via <Zephyr>/Kconfig:8 → <Zephyr>/Kconfig.zephyr:22

Menu path: (Top)

config SPI_DW_FIFO_DEPTH
    int
    default 32
    depends on SPI_DW && SPI && BOARD_EM_STARTERKIT

At <Zephyr>/boards/arc/hsdk/Kconfig.defconfig:36

Included via <Zephyr>/Kconfig:8 → <Zephyr>/Kconfig.zephyr:22

Menu path: (Top)

config SPI_DW_FIFO_DEPTH
    int
    default 32
    depends on SPI_DW && SPI && BOARD_HSDK

At <Zephyr>/soc/xtensa/intel_s1000/Kconfig.defconfig:27

Included via <Zephyr>/Kconfig:8 → <Zephyr>/Kconfig.zephyr:25 → <nRF>/doc/_build/kconfig/Kconfig.soc.defconfig:1

Menu path: (Top)

config SPI_DW_FIFO_DEPTH
    int
    default 32
    depends on SOC_INTEL_S1000

At <Zephyr>/soc/xtensa/intel_s1000/Kconfig.defconfig:27

Included via <Zephyr>/Kconfig:8 → <Zephyr>/Kconfig.zephyr:27

Menu path: (Top)

config SPI_DW_FIFO_DEPTH
    int
    default 32
    depends on SOC_INTEL_S1000

At <Zephyr>/drivers/spi/Kconfig.dw:28

Included via <Zephyr>/Kconfig:8 → <Zephyr>/Kconfig.zephyr:42 → <Zephyr>/drivers/Kconfig:40 → <Zephyr>/drivers/spi/Kconfig:58

Menu path: (Top) → Device Drivers → SPI hardware bus support → Designware SPI controller driver

config SPI_DW_FIFO_DEPTH
    int "RX and TX FIFO Depth"
    depends on SPI_DW && SPI
    help
      Corresponds to the SSI_TX_FIFO_DEPTH and
      SSI_RX_FIFO_DEPTH of the DesignWare Synchronous
      Serial Interface. Depth ranges from 2-256.

(The ‘depends on’ condition includes propagated dependencies from ifs and menus.)