CONFIG_SOC_PART_NUMBER_LPC55XXX

(No prompt – not directly user assignable.)

Type: string

Help

This string holds the full part number of the SoC. It is a hidden
option that you should not set directly. The part number selection
choice defines the default value for this string.

Help

This string holds the full part number of the SoC. It is a hidden
option that you should not set directly. The part number selection
choice defines the default value for this string.

Direct dependencies

(SOC_SERIES_LPC55XXX && SOC_FAMILY_LPC) || (SOC_SERIES_LPC55XXX && SOC_FAMILY_LPC)

(Includes any dependencies from ifs and menus.)

Defaults

“LPC55S16JBD100” if SOC_PART_NUMBER_LPC55S16JBD100
“LPC55S28JBD100” if SOC_PART_NUMBER_LPC55S28JBD100
“LPC55S69JBD100” if SOC_PART_NUMBER_LPC55S69JBD100
“LPC55S69JET98” if SOC_PART_NUMBER_LPC55S69JET98
“LPC55S16JBD100” if SOC_PART_NUMBER_LPC55S16JBD100
“LPC55S28JBD100” if SOC_PART_NUMBER_LPC55S28JBD100
“LPC55S69JBD100” if SOC_PART_NUMBER_LPC55S69JBD100
“LPC55S69JET98” if SOC_PART_NUMBER_LPC55S69JET98

Kconfig definitions

At <Zephyr>/soc/arm/nxp_lpc/lpc55xxx/Kconfig.soc:69

Included via <Zephyr>/Kconfig:8 → <Zephyr>/Kconfig.zephyr:38 → <Zephyr>/soc/Kconfig:15 → <nRF>/doc/_build/kconfig/Kconfig.soc.arch:2 → <Zephyr>/soc/arm/nxp_lpc/Kconfig:14

Menu path: (Top) → Hardware Configuration

config SOC_PART_NUMBER_LPC55XXX
    string
    default "LPC55S16JBD100" if SOC_PART_NUMBER_LPC55S16JBD100
    default "LPC55S28JBD100" if SOC_PART_NUMBER_LPC55S28JBD100
    default "LPC55S69JBD100" if SOC_PART_NUMBER_LPC55S69JBD100
    default "LPC55S69JET98" if SOC_PART_NUMBER_LPC55S69JET98
    depends on SOC_SERIES_LPC55XXX && SOC_FAMILY_LPC
    help
      This string holds the full part number of the SoC. It is a hidden
      option that you should not set directly. The part number selection
      choice defines the default value for this string.

At <Zephyr>/soc/arm/nxp_lpc/lpc55xxx/Kconfig.soc:69

Included via <Zephyr>/Kconfig:8 → <Zephyr>/Kconfig.zephyr:38 → <Zephyr>/soc/Kconfig:18 → <Zephyr>/soc/arm/nxp_lpc/Kconfig:14

Menu path: (Top) → Hardware Configuration

config SOC_PART_NUMBER_LPC55XXX
    string
    default "LPC55S16JBD100" if SOC_PART_NUMBER_LPC55S16JBD100
    default "LPC55S28JBD100" if SOC_PART_NUMBER_LPC55S28JBD100
    default "LPC55S69JBD100" if SOC_PART_NUMBER_LPC55S69JBD100
    default "LPC55S69JET98" if SOC_PART_NUMBER_LPC55S69JET98
    depends on SOC_SERIES_LPC55XXX && SOC_FAMILY_LPC
    help
      This string holds the full part number of the SoC. It is a hidden
      option that you should not set directly. The part number selection
      choice defines the default value for this string.

(The ‘depends on’ condition includes propagated dependencies from ifs and menus.)