CONFIG_SOC_NRF52811

(No prompt – not directly user assignable.)

Type: bool

Direct dependencies

(SOC_SERIES_NRF52X && SOC_FAMILY_NRF) || (SOC_SERIES_NRF52X && SOC_FAMILY_NRF)

(Includes any dependencies from ifs and menus.)

Defaults

No defaults. Implicitly defaults to n.

Symbols selected by this symbol

Symbols that select this symbol

Kconfig definitions

At <Zephyr>/soc/arm/nordic_nrf/nrf52/Kconfig.soc:91

Included via <Zephyr>/Kconfig:8 → <Zephyr>/Kconfig.zephyr:38 → <Zephyr>/soc/Kconfig:15 → <nRF>/doc/_build/kconfig/Kconfig.soc.arch:2 → <Zephyr>/soc/arm/nordic_nrf/Kconfig:17

Menu path: (Top) → Hardware Configuration

config SOC_NRF52811
    bool
    select HAS_HW_NRF_BPROT
    select HAS_HW_NRF_CCM
    select HAS_HW_NRF_CCM_LFLEN_8BIT
    select HAS_HW_NRF_CLOCK
    select HAS_HW_NRF_COMP
    select HAS_HW_NRF_ECB
    select HAS_HW_NRF_EGU0
    select HAS_HW_NRF_EGU1
    select HAS_HW_NRF_GPIO0
    select HAS_HW_NRF_GPIOTE
    select HAS_HW_NRF_NVMC_PE
    select HAS_HW_NRF_PDM
    select HAS_HW_NRF_POWER
    select HAS_HW_NRF_PPI
    select HAS_HW_NRF_PWM0
    select HAS_HW_NRF_QDEC
    select HAS_HW_NRF_RADIO_BLE_2M
    select HAS_HW_NRF_RADIO_BLE_CODED
    select HAS_HW_NRF_RADIO_IEEE802154
    select HAS_HW_NRF_RNG
    select HAS_HW_NRF_RTC0
    select HAS_HW_NRF_RTC1
    select HAS_HW_NRF_SAADC
    select HAS_HW_NRF_SPI0
    select HAS_HW_NRF_SPIM0
    select HAS_HW_NRF_SPIS0
    select HAS_HW_NRF_SPI1
    select HAS_HW_NRF_SPIM1
    select HAS_HW_NRF_SPIS1
    select HAS_HW_NRF_SWI0
    select HAS_HW_NRF_SWI1
    select HAS_HW_NRF_SWI2
    select HAS_HW_NRF_SWI3
    select HAS_HW_NRF_SWI4
    select HAS_HW_NRF_SWI5
    select HAS_HW_NRF_TEMP
    select HAS_HW_NRF_TIMER0
    select HAS_HW_NRF_TIMER1
    select HAS_HW_NRF_TIMER2
    select HAS_HW_NRF_TWI0
    select HAS_HW_NRF_TWIM0
    select HAS_HW_NRF_TWIS0
    select HAS_HW_NRF_UART0
    select HAS_HW_NRF_UARTE0
    select HAS_HW_NRF_WDT
    depends on SOC_SERIES_NRF52X && SOC_FAMILY_NRF

At <Zephyr>/soc/arm/nordic_nrf/nrf52/Kconfig.soc:91

Included via <Zephyr>/Kconfig:8 → <Zephyr>/Kconfig.zephyr:38 → <Zephyr>/soc/Kconfig:18 → <Zephyr>/soc/arm/nordic_nrf/Kconfig:17

Menu path: (Top) → Hardware Configuration

config SOC_NRF52811
    bool
    select HAS_HW_NRF_BPROT
    select HAS_HW_NRF_CCM
    select HAS_HW_NRF_CCM_LFLEN_8BIT
    select HAS_HW_NRF_CLOCK
    select HAS_HW_NRF_COMP
    select HAS_HW_NRF_ECB
    select HAS_HW_NRF_EGU0
    select HAS_HW_NRF_EGU1
    select HAS_HW_NRF_GPIO0
    select HAS_HW_NRF_GPIOTE
    select HAS_HW_NRF_NVMC_PE
    select HAS_HW_NRF_PDM
    select HAS_HW_NRF_POWER
    select HAS_HW_NRF_PPI
    select HAS_HW_NRF_PWM0
    select HAS_HW_NRF_QDEC
    select HAS_HW_NRF_RADIO_BLE_2M
    select HAS_HW_NRF_RADIO_BLE_CODED
    select HAS_HW_NRF_RADIO_IEEE802154
    select HAS_HW_NRF_RNG
    select HAS_HW_NRF_RTC0
    select HAS_HW_NRF_RTC1
    select HAS_HW_NRF_SAADC
    select HAS_HW_NRF_SPI0
    select HAS_HW_NRF_SPIM0
    select HAS_HW_NRF_SPIS0
    select HAS_HW_NRF_SPI1
    select HAS_HW_NRF_SPIM1
    select HAS_HW_NRF_SPIS1
    select HAS_HW_NRF_SWI0
    select HAS_HW_NRF_SWI1
    select HAS_HW_NRF_SWI2
    select HAS_HW_NRF_SWI3
    select HAS_HW_NRF_SWI4
    select HAS_HW_NRF_SWI5
    select HAS_HW_NRF_TEMP
    select HAS_HW_NRF_TIMER0
    select HAS_HW_NRF_TIMER1
    select HAS_HW_NRF_TIMER2
    select HAS_HW_NRF_TWI0
    select HAS_HW_NRF_TWIM0
    select HAS_HW_NRF_TWIS0
    select HAS_HW_NRF_UART0
    select HAS_HW_NRF_UARTE0
    select HAS_HW_NRF_WDT
    depends on SOC_SERIES_NRF52X && SOC_FAMILY_NRF

(The ‘depends on’ condition includes propagated dependencies from ifs and menus.)