CONFIG_RV32M1_INTMUX_CHANNEL_2

INTMUX channel 2

Type: bool

Help

Enable support for INTMUX channel 2.

Direct dependencies

(BT && BOARD_RV32M1_VEGA) || (MULTI_LEVEL_INTERRUPTS && SOC_OPENISA_RV32M1_RISCV32) || (MULTI_LEVEL_INTERRUPTS && SOC_OPENISA_RV32M1_RISCV32) || (!BT && RV32M1_INTMUX)

(Includes any dependencies from ifs and menus.)

Defaults

• n

• y

• y

Kconfig definitions

At <Zephyr>/boards/riscv/rv32m1_vega/Kconfig.defconfig:29

Included via <Zephyr>/Kconfig:8 → <Zephyr>/Kconfig.zephyr:22

Menu path: (Top)

config RV32M1_INTMUX_CHANNEL_2
    bool
    default n
    depends on BT && BOARD_RV32M1_VEGA

---

At <Zephyr>/soc/riscv/openisa_rv32m1/Kconfig.defconfig:105

Included via <Zephyr>/Kconfig:8 → <Zephyr>/Kconfig.zephyr:25 → <nRF>/doc/_build/kconfig/Kconfig.soc.defconfig:1

Menu path: (Top)

config RV32M1_INTMUX_CHANNEL_2
    bool
    default y
    depends on MULTI_LEVEL_INTERRUPTS && SOC_OPENISA_RV32M1_RISCV32

---

At <Zephyr>/soc/riscv/openisa_rv32m1/Kconfig.defconfig:105

Included via <Zephyr>/Kconfig:8 → <Zephyr>/Kconfig.zephyr:27

Menu path: (Top)

config RV32M1_INTMUX_CHANNEL_2
    bool
    default y
    depends on MULTI_LEVEL_INTERRUPTS && SOC_OPENISA_RV32M1_RISCV32

---

At <Zephyr>/drivers/interrupt_controller/Kconfig.rv32m1:35

Included via <Zephyr>/Kconfig:8 → <Zephyr>/Kconfig.zephyr:42 → <Zephyr>/drivers/Kconfig:28 → <Zephyr>/drivers/interrupt_controller/Kconfig:60

Menu path: (Top) → Device Drivers → Interrupt Controllers → OpenISA RV32M1 INTMUX interrupt controller support

config RV32M1_INTMUX_CHANNEL_2
    bool "INTMUX channel 2"
    depends on !BT && RV32M1_INTMUX
    help
      Enable support for INTMUX channel 2.

(The ‘depends on’ condition includes propagated dependencies from ifs and menus.)