CONFIG_NRFX_TIMER

Enable TIMER driver

Type: bool

Direct dependencies

((HAS_HW_NRF_TIMER0 || HAS_HW_NRF_TIMER1 || HAS_HW_NRF_TIMER2 || HAS_HW_NRF_TIMER3 || HAS_HW_NRF_TIMER4) && HAS_NRFX) || ((HAS_HW_NRF_TIMER0 || HAS_HW_NRF_TIMER1 || HAS_HW_NRF_TIMER2 || HAS_HW_NRF_TIMER3 || HAS_HW_NRF_TIMER4) && HAS_NRFX && 0) || ((UART_0_NRF_HW_ASYNC || UART_1_NRF_HW_ASYNC || UART_2_NRF_HW_ASYNC || UART_3_NRF_HW_ASYNC) && UART_NRFX && SERIAL)

(Includes any dependencies from ifs and menus.)

Default

y

Symbols that select this symbol

Kconfig definitions

At <Zephyr>/modules/hal_nordic/nrfx/Kconfig:255

Included via <Zephyr>/Kconfig:8 → <Zephyr>/Kconfig.zephyr:33 → <Zephyr>/modules/Kconfig:6 → <nRF>/doc/_build/kconfig/Kconfig.modules:50 → <Zephyr>/modules/hal_nordic/Kconfig:217

Menu path: (Top) → Modules → hal_nordic (/home/runner/work/sdk-nrf/sdk-nrf/ncs/modules/hal/nordic) → nrfx drivers

config NRFX_TIMER
    bool "Enable TIMER driver"
    depends on (HAS_HW_NRF_TIMER0 || HAS_HW_NRF_TIMER1 || HAS_HW_NRF_TIMER2 || HAS_HW_NRF_TIMER3 || HAS_HW_NRF_TIMER4) && HAS_NRFX

At <Zephyr>/modules/hal_nordic/nrfx/Kconfig:255

Included via <Zephyr>/Kconfig:8 → <Zephyr>/Kconfig.zephyr:33 → <Zephyr>/modules/Kconfig:80 → <Zephyr>/modules/hal_nordic/Kconfig:217

Menu path: (Top) → Modules → nrfx drivers

config NRFX_TIMER
    bool "Enable TIMER driver"
    depends on (HAS_HW_NRF_TIMER0 || HAS_HW_NRF_TIMER1 || HAS_HW_NRF_TIMER2 || HAS_HW_NRF_TIMER3 || HAS_HW_NRF_TIMER4) && HAS_NRFX && 0

At <Zephyr>/drivers/serial/Kconfig.nrfx:378

Included via <Zephyr>/Kconfig:8 → <Zephyr>/Kconfig.zephyr:42 → <Zephyr>/drivers/Kconfig:26 → <Zephyr>/drivers/serial/Kconfig:132

Menu path: (Top) → Device Drivers → Serial Drivers → nRF UART nrfx drivers

config NRFX_TIMER
    bool
    default y
    depends on (UART_0_NRF_HW_ASYNC || UART_1_NRF_HW_ASYNC || UART_2_NRF_HW_ASYNC || UART_3_NRF_HW_ASYNC) && UART_NRFX && SERIAL

(The ‘depends on’ condition includes propagated dependencies from ifs and menus.)