CONFIG_MCR20A_IS_PART_OF_KW2XD_SIP

MCR20A device is part of KW2xD SiP

Type: bool

Help

If this option is set, the driver does not perform a hardware
reset and the CLK_OUT frequency is not set, instead these settings
are performed during the initialization of the SoC.

Direct dependencies

(IEEE802154_MCR20A && BOARD_USB_KW24D512) || (IEEE802154_MCR20A && IEEE802154)

(Includes any dependencies from ifs and menus.)

Default

y

Kconfig definitions

At <Zephyr>/boards/arm/usb_kw24d512/Kconfig.defconfig:27

Included via <Zephyr>/Kconfig:8 → <Zephyr>/Kconfig.zephyr:22

Menu path: (Top)

config MCR20A_IS_PART_OF_KW2XD_SIP
    bool
    default y
    depends on IEEE802154_MCR20A && BOARD_USB_KW24D512

At <Zephyr>/drivers/ieee802154/Kconfig.mcr20a:18

Included via <Zephyr>/Kconfig:8 → <Zephyr>/Kconfig.zephyr:42 → <Zephyr>/drivers/Kconfig:10 → <Zephyr>/drivers/ieee802154/Kconfig:66

Menu path: (Top) → Device Drivers → IEEE 802.15.4 drivers options → NXP MCR20A Driver support

config MCR20A_IS_PART_OF_KW2XD_SIP
    bool "MCR20A device is part of KW2xD SiP"
    depends on IEEE802154_MCR20A && IEEE802154
    help
      If this option is set, the driver does not perform a hardware
      reset and the CLK_OUT frequency is not set, instead these settings
      are performed during the initialization of the SoC.

(The ‘depends on’ condition includes propagated dependencies from ifs and menus.)