CONFIG_CAF_BLE_ADV_SLOW_INT_MIN

Minimum Advertising Interval during slow advertising (N * 0.625 milliseconds)

Type: hex

Help

Minimum Advertising Interval shall be less than or equal to the
Maximum Advertising Interval. The Minimum Advertising Interval and
Maximum Advertising Interval should not be the same value (as stated
in Bluetooth Core Spec 5.2, section 7.8.5)

Direct dependencies

CAF_BLE_ADV && CAF

(Includes any dependencies from ifs and menus.)

Default

0x00a0

Kconfig definition

At <nRF>/subsys/caf/modules/Kconfig.ble_adv:38

Included via <Zephyr>/Kconfig:8 → <Zephyr>/Kconfig.zephyr:33 → <Zephyr>/modules/Kconfig:6 → <nRF>/doc/_build/kconfig/Kconfig.modules:2 → <nRF>/Kconfig.nrf:92 → <nRF>/subsys/Kconfig:50 → <nRF>/subsys/caf/Kconfig:16 → <nRF>/subsys/caf/modules/Kconfig:7

Menu path: (Top) → Modules → nrf (/home/runner/work/sdk-nrf/sdk-nrf/ncs/nrf) → Nordic nRF Connect → Common Application Framework → Enable Bluetooth LE advertising

config CAF_BLE_ADV_SLOW_INT_MIN
    hex "Minimum Advertising Interval during slow advertising (N * 0.625 milliseconds)"
    range 0x0020 0x4000
    default 0x00a0
    depends on CAF_BLE_ADV && CAF
    help
      Minimum Advertising Interval shall be less than or equal to the
      Maximum Advertising Interval. The Minimum Advertising Interval and
      Maximum Advertising Interval should not be the same value (as stated
      in Bluetooth Core Spec 5.2, section 7.8.5)

(The ‘depends on’ condition includes propagated dependencies from ifs and menus.)