CONFIG_2ND_LVL_INTR_03_OFFSET

Level 1 IRQ line for 2ND level aggregator 3

Type: int

Help

This is the level $(prev-level-num) interrupt number for level
$(cur-level-num) interrupt aggregator $(aggregator).

Direct dependencies

BOARD_INTEL_ADSP_CAVS15 || BOARD_INTEL_ADSP_CAVS18 || BOARD_INTEL_ADSP_CAVS20 || BOARD_INTEL_ADSP_CAVS25 || BOARD_INTEL_S1000_CRB || (MULTI_LEVEL_INTERRUPTS && SOC_OPENISA_RV32M1_RISCV32) || (MULTI_LEVEL_INTERRUPTS && SOC_OPENISA_RV32M1_RISCV32) || 2ND_LEVEL_INTERRUPTS

(Includes any dependencies from ifs and menus.)

Defaults

Kconfig definitions

At <Zephyr>/boards/xtensa/intel_adsp_cavs15/Kconfig.defconfig:25

Included via <Zephyr>/Kconfig:8 → <Zephyr>/Kconfig.zephyr:22

Menu path: (Top)

config 2ND_LVL_INTR_03_OFFSET
    int
    default CAVS_ICTL_3_OFFSET
    depends on BOARD_INTEL_ADSP_CAVS15

At <Zephyr>/boards/xtensa/intel_adsp_cavs18/Kconfig.defconfig:25

Included via <Zephyr>/Kconfig:8 → <Zephyr>/Kconfig.zephyr:22

Menu path: (Top)

config 2ND_LVL_INTR_03_OFFSET
    int
    default CAVS_ICTL_3_OFFSET
    depends on BOARD_INTEL_ADSP_CAVS18

At <Zephyr>/boards/xtensa/intel_adsp_cavs20/Kconfig.defconfig:25

Included via <Zephyr>/Kconfig:8 → <Zephyr>/Kconfig.zephyr:22

Menu path: (Top)

config 2ND_LVL_INTR_03_OFFSET
    int
    default CAVS_ICTL_3_OFFSET
    depends on BOARD_INTEL_ADSP_CAVS20

At <Zephyr>/boards/xtensa/intel_adsp_cavs25/Kconfig.defconfig:25

Included via <Zephyr>/Kconfig:8 → <Zephyr>/Kconfig.zephyr:22

Menu path: (Top)

config 2ND_LVL_INTR_03_OFFSET
    int
    default CAVS_ICTL_3_OFFSET
    depends on BOARD_INTEL_ADSP_CAVS25

At <Zephyr>/boards/xtensa/intel_s1000_crb/Kconfig.defconfig:24

Included via <Zephyr>/Kconfig:8 → <Zephyr>/Kconfig.zephyr:22

Menu path: (Top)

config 2ND_LVL_INTR_03_OFFSET
    int
    default CAVS_ICTL_3_OFFSET
    depends on BOARD_INTEL_S1000_CRB

At <Zephyr>/soc/riscv/openisa_rv32m1/Kconfig.defconfig:76

Included via <Zephyr>/Kconfig:8 → <Zephyr>/Kconfig.zephyr:25 → <nRF>/doc/_build/kconfig/Kconfig.soc.defconfig:1

Menu path: (Top)

config 2ND_LVL_INTR_03_OFFSET
    int
    default 27
    depends on MULTI_LEVEL_INTERRUPTS && SOC_OPENISA_RV32M1_RISCV32

At <Zephyr>/soc/riscv/openisa_rv32m1/Kconfig.defconfig:76

Included via <Zephyr>/Kconfig:8 → <Zephyr>/Kconfig.zephyr:27

Menu path: (Top)

config 2ND_LVL_INTR_03_OFFSET
    int
    default 27
    depends on MULTI_LEVEL_INTERRUPTS && SOC_OPENISA_RV32M1_RISCV32

At <Zephyr>/drivers/interrupt_controller/Kconfig.multilevel.aggregator_template:3

Included via <Zephyr>/Kconfig:8 → <Zephyr>/Kconfig.zephyr:42 → <Zephyr>/drivers/Kconfig:28 → <Zephyr>/drivers/interrupt_controller/Kconfig:48 → <Zephyr>/drivers/interrupt_controller/Kconfig.multilevel:65

Menu path: (Top) → Device Drivers → Interrupt Controllers → Multi-level interrupt support → Second-level interrupt support

config 2ND_LVL_INTR_03_OFFSET
    int "Level 1 IRQ line for 2ND level aggregator 3"
    default 0
    depends on 2ND_LEVEL_INTERRUPTS
    help
      This is the level $(prev-level-num) interrupt number for level
      $(cur-level-num) interrupt aggregator $(aggregator).

(The ‘depends on’ condition includes propagated dependencies from ifs and menus.)