nRF5 SDK v13.1.0 ------------------------ Release Date: Week 27, 2017 Highlights: - Added support for the SoftDevice S332 v4.0.x. - Added serialization solution for the combined BLE and ANT SoftDevice. The following toolchains/devices have been used for testing and verification: - ARM: MDK-ARM version 5.18a - GCC: GCC ARM Embedded 4.9 2015q3 - IAR: IAR Workbench 7.80.4 Supported SoftDevices: - S132 v4.0.x - S140 v5.0.0-2.alpha - S212 v4.0.x - S332 v4.0.x Supported boards: - PCA10040 - PCA10056 (limited support; see the "Scope for the nRF52840 chip" section) - Dynastream's D52DK1 (only for ANT examples) For other devices and boards, see the SDK documentation, section "Using the SDK with other boards". *** Scope for the nRF52840 chip ******************************** All examples and libraries for the new chip must be treated as experimental. Some examples have not been ported to run on nRF52840. Check the existing example projects to see which targets are supported. The following SDK features are supported on the new nRF52840 chip: - New 804.15.4 stack library with an example - Most BLE, hardware peripheral, and NFC examples (with some exceptions; see the available example projects for details) - Peripheral HAL and drivers (both for existing and new peripherals) - Cryptography library including CryptoCell CC310 backend - NFC Type 2 Tag and Type 4 Tag - Secure DFU (only with micro-ecc backend) - Serialization of the S140 SoftDevice v5.0.0-2.alpha with UART The following SDK features are not supported on the new nRF52840 chip yet: - ANT - DTM - ESB and Gazell - FreeRTOS - Eddystone *** New features ***************** ** BLE ** - Added S332 projects in Heart Rate Sensor and Heart Rate Collector examples. ** ANT ** - Added support the for the new SoftDevice S332 v4.0.x. - Added S332 examples: 'Ant Shared Channels' and 'ANT and BLE Heart Rate Monitor Relay Application'. - Added an S332 project for the D52DK1 Development Kit in the ANT Message Types example. ** Serialization ** - Added a solution for serialization of combined BLE and ANT SoftDevice using the ble_ant_app_hrm example as the use case. *** Changes ************ ** ANT ** - Removed the nrf_sd_def.h file. It will be now distributed just like the rest of SoftDevice header files through https://www.thisisant.com *** Bugfixes ************* ** Drivers and libraries ** - Fixed a potential overflow in watchdog timer (WDT) driver initialization. *** Known Issues ***************** ** Overall ** - Updating the MDK requires to manually copy the header and linker files into the SDK folder (ARM Keil uVision 4, IAR Workbench, ARMGCC). - When uploading an application to an nRF52 IC using nrfjprog, you must provide the "--reset/-r" argument or powercycle the board. ** BLE ** - Some examples might have excessively verbose logging. - Examples that use the Peer Manager might assert when deleting bonds, because advertising is started twice. - In the Proximity Application, writing "High Alert" to the AlertLevel characteristic of the Link Loss Service does not trigger a high alert when the link is lost. - When an Android device is used as a peripheral, it sends slave security request with the MITM bit set. The central applications in the SDK will reject the security request (Pairing Failed) because they do not support MITM. - Advertisement intervals in the Eddystone Beacon Application are not verified. Clients must ensure that the configured advertisement interval is within the valid range. Note that EID/eTLM configurations might require advertisement intervals to be larger than the default value. ** NFC ** - NFC Type 2 and Type 4 Tag HAL modules require using TIMER4 on nRF52832. - Type 2 Tag on nRF52840 chips might fail unpredictably. - Some mobile phone apps cannot write Type 4 Tag ("NFC Tool" seems to be okay to use). ======================================================================== nRF5 SDK v13.0.0 ------------------------ Release Date: Week 11, 2017 Highlights: - Implemented a new license scheme for the SDK distribution. See the documentation folder for details. - Updated the Bluetooth and ANT examples to support the newest SoftDevices S132 v4.0.2, S140 v5.0.0-2.alpha, and S212 v4.0.0. - Included a new 804.15.4 stack library with an example. - Released the Eddystone example and the NFC Type 4 Tag stack in production quality. - Added workarounds for the nRF52832 anomaly 109 (DMA: DMA access transfers might be corrupted). - Added serialization of the ANT S212 SoftDevice v4.0.0 (experimental). - Added an example showing secure DFU with UART transport layer. - This release does not support nRF51. - This release does not support the S332 SoftDevice. The following toolchains/devices have been used for testing and verification: - ARM: MDK-ARM version 5.18a - GCC: GCC ARM Embedded 4.9 2015q3 - IAR: IAR Workbench 7.60.2 Supported SoftDevices: - S132 v4.0.2 - S140 v5.0.0-2.alpha - S212 v4.0.0 Supported boards: - PCA10040 - PCA10056 (limited support; see the "Scope for the nRF52840 chip" section) - Dynastream's D52DK1 (only for ANT examples) For other devices and boards, see the SDK documentation, section "Using the SDK with other boards". *** Scope for the nRF52840 chip ******************************** All examples and libraries for the new chip must be treated as experimental. Some examples have not been ported to run on nRF52840. Check the existing example projects to see which targets are supported. The following SDK features are supported on the new nRF52840 chip: - New 804.15.4 stack library with an example - Most BLE, hardware peripheral, and NFC examples (with some exceptions; see the available example projects for details) - Peripheral HAL and drivers (both for existing and new peripherals) - Cryptography library including CryptoCell CC310 backend - NFC Type 2 Tag and Type 4 Tag - Secure DFU (only with micro-ecc backend) - Serialization of the S140 SoftDevice v5.0.0-2.alpha with UART The following SDK features are not supported on the new nRF52840 chip yet: - ANT - DTM - ESB and Gazell - FreeRTOS - Eddystone *** New features ***************** ** BLE ** - Added an experimental BLE Multiperipheral example (experimental_ble_app_multiperipheral) that uses the proprietary LED Button Service to show how a peripheral device can manage connections with multiple peers simultaneously. ** ANT ** - Added serialization for S212 v4.0.0. With this solution, an ANT application can run on any architecture, without the SoftDevice. All SoftDevice API calls are transported via UART to an nRF52 device that runs the ANT connectivity application (examples\connectivity\experimental_ant) and the S212 SoftDevice. The ANT I/O example demonstrates the new serialization solution (examples\ant\ant_io_demo, see targets: "ser_s212_uart"). Note that the serialized solution does not support the new API calls added in S212 v4.0.0. The SDK folders with the ANT serialization implementation are not marked as experimental, because the paths would be too long. - Added a new ANT Frequency Agility example (examples\ant\experimental\ant_frequency_agility). ** 804.15.4 ** - Added a full 802.15.4 stack implementation to the SDK. The library (components\experimental_802_15_4) is available only for nRF52840 devices. The MAC layer API is located in components\experimental_802_15_4\api\MAC. The example application is located in examples\802_15_4\experimental\wireless_uart. - Added an experimental Wireless UART example (wireless_uart) that shows how to use the new 804.15.4 stack. ** NFC ** - Added two experimental examples that show NFC pairing (BLE Pairing Using NFC - experimental_ble_nfc_pairing_reference and ble_nfc_pairing_reference_c). ** DFU ** - Added support for serial/UART and an example for a secure DFU bootloader using UART (experimental). - Implemented SoftDevice major version checks for certain upgrade types. - Implemented a delayed reset after the DFU: After a SoftDevice, bootloader, or SoftDevice and bootloader update, a timer will start. If no new update is initiated before its expiration, the device will look for a valid application and launch it. - Added a new set of error codes (extended error codes) that the DFU target may send as a response to the DFU controller to convey the reason for a failure. ** Serialization ** - Added serialization support for the ANT S212 SoftDevice v4.0.0 (experimental). See the ANT section for details. ** Drivers and libraries ** - Added workarounds for the nRF52832 anomaly 109 (DMA: DMA access transfers might be corrupted). Affected drivers: PWM, SPIM, TWIM, SPIS, and TWIS. - Added several new libraries: - Command line interface (CLI) library: Console that supports various serial interfaces (UART, RTT, USB CDC ACM). See the usage example in examples/peripheral/cli. - GFX library: Graphics library that supports simple operations like drawing circles, lines, rectangles, or bitmaps and printing strings. GFX uses an LCD driver interface. Two implementations for popular TFTs have been added (ILI9341, ST7735). See the usage example in examples/peripheral/gfx. - Serial port library: Module for handling UART communication. It supports multibyte transfers, time-outs, and buffering of data. The module is a replacement for app_uart. See the usage example in examples/peripheral/serial. - SPI transaction manager: Module for managing thread-safe access to the SPI driver. The module supports scheduling transactions that consist of multiple transfers. See the usage example in examples/peripheral/spi_master_using_nrf_spi_mngr. - Error code to string converter (STRERR): Module for converting error codes to strings. The module is used by nrf_log. - Added two drivers for TFT LCDs: ILI9341 and ST7735. *** Changes ************ ** BLE ** - Updated all BLE examples to use the nRF Connect PC application (replacing Master Control Panel). - Modified all BLE example to have logging enabled by default, to make testing and debugging the SDK examples more consistent. Note that logging greatly increases power consumption. Therefore, logging should be disabled in any final product or when performing power profiling tests. - Updated the Eddystone example so that it can be released in production quality. - Updated all BLE examples to support the newest SoftDevices S132 v4.0.2 and S140 v5.0.0-2.alpha. - Updated the Peer Manager to handle more than eight links. - Updated all BLE examples to use the GATT module. - Updated the GATT module to handle Data Length update related events. - Improved the Alert Notification example application to more clearly convey the Alert Notification Service. Increased the verbosity on UART instead of relying only on the LEDs. - Removed the experimental label from the Running Speed and Cadence central example application. - Cleaned up the use of RX/TX in the Nordic UART Service (NUS) to match the terminology used in external tools (nRF Connect, nRF Toolbox). - Modified the BLE UART example to enable the use of long ATT_MTU. ** DFU ** - Updated the experimental BLE Buttonless DFU Service to use the RAM-retention register to enter bootloader mode instead of flash access. - Updated the experimental BLE Buttonless DFU Service to use the Secure-DFU UUID (16-bit proprietary Nordic UUID). - Updated the BLE Buttonless DFU characteristic to use a new vendor-specific base UUID (0x8EC9xxxx-F315-4F60-9FB8-838830DAEA50). The UUID changed to 0x8EC90003-F315-4F60-9FB8-838830DAEA50. - Changed the BLE Buttonless DFU characteristic from notification to indication. - Changed the minimum version requirement for nrfutil to v2.2.0. ** NFC ** - Updated the NFC Type 4 Tag library so that it can be released in production quality. The library was moved to components\nfc\t4t_lib. The example that shows the Type 4 Tag library is located in examples\nfc\writable_ndef_msg. - Updated the BLE Heart Rate Collector Example with NFC Pairing and the HID Keyboard Application with BLE pairing using NFC to use the NFC BLE Pairing library (nfc_pair_lib). - Updated the BSP NFC Module so that it can be used without restrictions together with Type 2 and Type 4 Tag libraries. ** Serialization ** - Updated serialization to support the latest BLE SoftDevices S132 v4.0.2 and S140 v5.0.0-2.alpha. ** Drivers and libraries ** - Updated the implementation of app_uart. - Moved the static configuration of app_timer to sdk_config.h. - Updated several hardware drivers: - nrf_drv_power: Added initial support for USB plugging with SoftDevice. - nrf_drv_pwm: Allowed for playbacks to be started using PPI. - nrf_drv_spi: Added an abort function. - nrf_drv_twi: Added a function for checking if the driver is busy. - nrf_drv_uart: Added a function for checking the receiver state. - nrf_drv_csense: Extended the driver to perform measurements using SAADC. COMP is still supported, but it is not recommended for production (see anomaly 84). *** Bugfixes ************* - Fixed several bugs in secure DFU to prevent handling invalid updates. - Updated secure DFU on nRF52840 to utilize the entire 1 MB of flash, up from the old (unintended) limitation of 512 KB. - Fixed a bug where ble_app_hrs_rscs_relay would not dispatch advertising time-out events to the advertising module. - Fixed a bug where ble_app_uart would not handle the disconnected event if it was received before a service discovery was completed. - Fixed a bug where ble_app_pwr_profiling did not initialize the button module. - Fixed a bug where ble_app_proximity would not always trigger "High Alert" on the AlertLevel characteristic when the link was lost. - Fixed a bug where ble_app_uart would be blocked if app_uart_put returned an error. - Fixed a bug where Peer Manager corrupted FDS data in flash. - Fixed a bug where FDS records updated with fds_record_update() would not be garbage collected. - Fixed an unaligned access error in FDS when using certain compiler options in GCC. - Fixed a bug in FDS where a missing swap page went undetected. - Fixed the tick update method in FreeRTOS. - Fixed a bug where wake-on-field functionality would not work with Type 2 and Type 4 Tag libraries. - Several bugfixes and improvements on drivers: - nrf_drv_timer: Fixed a bug in NRF_TIMER_IS_BIT_WIDTH_VALID. - nrf_drv_saadc: Fixed a bug where nrf_drv_saadc_calibrate_offset() enabled a wrong interrupt. - nrf_drv_pwm: Fixed inaccurate description of the NRF_DRV_PWM_FLAG_LOOP flag. *** Known Issues ***************** ** BLE ** - If the S132 SoftDevice is configured with 0 Peripheral roles and 0 Central roles, sd_ble_enable() may corrupt up to 8 bytes above the returned app_ram_base. For applications having such a configuration, set the application RAM start to 8 bytes or more above the returned app_ram_base. ** DFU ** - The S140 SoftDevice currently does not support updating the bootloader. - Secure DFU (serial): - nrfutil currently does not support sending combined zip images (SD+APP, SD+BL+APP, BL+SD). Use individually generated zip-images instead. - The device will not automatically boot the application after a SoftDevice update. Reset the device manually. - Secure DFU (BLE): Updates of SD+BL+APP may time out between the SD+BL and APP stage on certain Android phones. Investigate the time-out value with respect to your mobile app and consider increasing it. ------------------------------------------------------------------------ nRF5 SDK v13.0.0-1.alpha ------------------------ Release Date: Week 50, 2016 This release is an alpha release and should ONLY be used for the following purposes: - Exploring and trying out the new Bluetooth 5 features available with the new SoftDevices. - Trying out new features on the nRF52840 chip. Highlights: - Updated the BLE ATT_MTU Throughput Example (ble_app_att_mtu_throughput) to showcase a PHY data rate of 2 Ms/s and coded PHY for long-range transmission. - Updated the cryptography library to include a CryptoCell CC310 backend (API changes compared to SDK 12.2.0). - Updated the BLE LE Secure Connections Multirole Example (ble_app_multirole_lesc) to use the CryptoCell CC310 backend of the cryptography library (available only for nRF52840). - Added serialization of the new SoftDevices S132 v5.0.0-1.alpha and S140 v5.0.0-1.alpha. Added USB CDC ACM serial as transport layer. - Dropped support for nRF51 Series devices. - Dropped support for RTX. The following toolchains/devices have been used for testing and verification: - ARM: MDK-ARM version 5.18a - GCC: GCC ARM Embedded 4.9 2015q3 - IAR: IAR Workbench 7.30.4 Supported SoftDevices: - S140 v5.0.0-1.alpha - S132 v5.0.0-1.alpha - S212 v2.0.0 - S332 v2.0.0 Supported boards: - PCA10040 - PCA10056 (limited support; see the "Scope for the nRF52840" section) - Dynastream's N5DK1 (only for ANT examples) For other devices and boards, see the SDK documentation, section "Using the SDK with other boards". *** Scope for the nRF52840 chip ******************************** All examples and libraries for the new chip must be treated as experimental. Some examples have not been ported to run on nRF52840. Check the existing example projects to see which targets are supported. The following SDK features are supported on the new nRF52840 chip: - Most BLE, hardware peripheral, and NFC examples (with some exceptions; see the available example projects for details) - Peripheral HAL and drivers (both for existing and new peripherals) - Cryptography library including CryptoCell CC310 backend - NFC Type 2 Tag and Type 4 Tag - Secure DFU (only with micro-ecc backend) - Serialization of the SoftDevices S132 v5.0.0-1.alpha and S140 v5.0.0-1.alpha with UART and USB CDC ACM transport layers The following SDK features are not supported on the new nRF52840 chip yet: - ANT - DTM - ESB and Gazell - FreeRTOS - Eddystone *** New features ***************** ** BLE ** - Updated the BLE ATT_MTU Throughput Example to demonstrate the use of Bluetooth 5 features: - PHY data rate of 2 Ms/s (nRF52832 and nRF52840) - Coded PHY for long-range transmission (nRF52840 only) ** NFC ** - Added a layer of abstraction for NFC OOB pairing, the NFC BLE Pairing Library (nfc_ble_pair_lib). - Added a central and a peripheral NFC BLE example that use the new NFC BLE Pairing Library: - Heart Rate Collector Application with NFC pairing (ble_app_hrs_nfc_c, to be used with the Adafruit shield) - BLE Peripheral example: Heart Rate Application with BLE pairing using NFC Pairing Library (ble_app_hrs_nfc_pairing_lib) ** Cryptography ** - Added a backend to the cryptography library that supports the ARM CryptoCell 310 hardware-accelerated cryptography engine. - Updated the LE Secure Connections Multirole Example to showcase how to use the cryptography library with the CryptoCell CC310 backend (nRF52840 only). ** Serialization ** - Added serialization of the new SoftDevices S132 v5.0.0-1.alpha and S140 v5.0.0-1.alpha. - Added the transport layer USB CDC ACM (nRF52840 only). *** Changes ************ ** Drivers and libraries ** - Refactored the RNG driver. ** BLE ** - Fixed a bug in the Multi-link Example where disconnecting all central links would disable the app_button module. - Fixed two bugs in the Buttonless DFU Template Application: - The example now has writable set on the Control Point characteristic. - The example is now using the correct part of the flash, enabling flashing when a bootloader is present. - Fixed a bug in the ANCS Client Application where NULL-termination of a received attribute could happen outside its allocated buffer. - Fixed a bug in the ANCS Client Application where using RFU attribute IDs could cause illegal memory access. - Modified the LE Secure Connections Multirole Example to prevent creation of a second link to the same peer simultaneously. ** NFC ** - Fixed a bug in NFC Type 2 and Type 4 Tag HAL where NFC would hang when the chip was woken up from SYSTEM_OFF and HFXO was started before NFCT requested it. ** Serialization ** - UART and HCI UART transports have been optimized to better utilize EasyDMA. *** Known Issues **************** ** Overall ** - Updating the MDK requires to manually copy the header and linker files into the SDK folder (ARM Keil uVision 4, IAR Workbench, ARMGCC). - When uploading an application to an nRF52 IC using nrfjprog, you must provide the "--reset/-r" argument or powercycle the board. ** BLE ** - Some examples might have excessively verbose logging. - Examples that use the Peer Manager might assert when deleting bonds, because advertising is started twice. - In the Proximity Application, writing "High Alert" to the AlertLevel characteristic of the Link Loss Service does not trigger a high alert when the link is lost. - When an Android device is used as a peripheral, it sends slave security request with the MITM bit set. The central applications in the SDK will reject the security request (Pairing Failed) because they do not support MITM. - Advertisement intervals in the Eddystone Beacon Application are not verified. Clients must ensure that the configured advertisement interval is within the valid range. Note that EID/eTLM configurations might require advertisement intervals larger than the default value. ** NFC ** - NFC Type 2 and Type 4 Tag HAL modules require using TIMER4 on nRF52832. - Type 2 Tag on nRF52840 chips might fail unpredictably. - Some mobile phone apps cannot write Type 4 Tag ("NFC Tool" seems to be okay to use). ======================================================================== nRF5 SDK v12.2.0 ---------------- Release Date: Week 49, 2016 Highlights: - Added an NFC Type 4 Tag stack (experimental). - Replaced the existing Eddystone example with a new implementation. - Added experimental support for the new nRF52840 chip. See the section "Scope for the nRF52840" for information about which SDK features are supported on the new chip. The following toolchains/devices have been used for testing and verification: - ARM: MDK-ARM version 5.18a - GCC: GCC ARM Embedded 4.9 2015q3 - IAR: IAR Workbench 7.30.4 Supported SoftDevices: - S130 v2.0.1 - S132 v3.0.0 - S212 v2.0.0 - S332 v2.0.0 Supported boards: - PCA10028 - PCA10031 - PCA10040 - PCA10056 (limited support; see the "Scope for the nRF52840" section) - PCA20006 (only for beacon examples) - Dynastream's N5DK1 (only for ANT examples) For other devices and boards, see the SDK documentation, section "Using the SDK with other boards". *** Scope for the nRF52840 chip ******************************** Support for the new development board PCA10056 has been added. All examples and libraries for the new chip should be treated as experimental. The following SDK features are supported on the new nRF52840 chip: - Most BLE, hardware peripheral, and NFC examples (with some exceptions; see the available example projects for details) - Peripheral HAL and drivers (both for existing and new peripherals) - Library supporting CC310 CryptoCell - NFC Type 2 Tag and Type 4 Tag The following SDK features are not supported on the new nRF52840 chip: - ANT - Secure DFU - Serialization - DTM - ESB and Gazell - RTX and FreeRTOS - Eddystone *** New features ***************** ** Drivers and libraries ** - Added a SysTick driver. - Added a queue module (nrf_queue). - Added a memory block allocator module (nrf_balloc). - Added an atomic operations module (nrf_atomic, nRF52 Series only). - Added an atomic FIFO module (app_atfifo, nRF52 Series only). - Added a power management module (nrf_pwr_mgmt). - Added an asynchronous SD card driver using SPI. - Ported fatfs for nRF5 (external library). *** nRF52840 specific updates *** - Added a USB device stack and the following USB classes: HID, MSC, CDC ACM, Audio. - Added a QSPI driver for external memories. - Added support for 2 UART instances. - Added support for 4 PWM instances. - Added support for more GPIO (48 pins). ** BLE ** - Integrated the Eddystone project from GitHub, replacing the existing Eddystone Beacon example. The new implementation follows the specification at https://github.com/google/eddystone (commit 97225a9 from Sep 28, 2016). The new Eddystone library and example supports both nRF51 and nRF52 (experimental). - Added an example to demonstrate ATT throughput with long ATT_MTU and DLE (experimental). - Added a GATT module that encapsulates the long ATT_MTU feature. - Extended the Apple Notification Center Service (ANCS) Service module and example application: - Added 'notification actions' that depend on the app (for example, marking a new email as read or dialing up a missed call). - Added functionality to retrieve app attributes, which allows to get the name of the app that provided a notification. - Extended the Continuous Glucose Monitoring Service (CGMS) example application to handle greater, lesser, or equal filtering for the Record Access control point. - Updated the BLE examples to no longer attempt to re-initiate bonding if encryption fails due to a missing or wrong key. ** NFC ** - Added support for NFC Type 4 Tag with both read and write NDEF access (experimental). - Added support for raw ISO-DEP transmission protocol mode. - Added Type 4 Tag support to the Adafruit Tag Reader example. ** Cryptography ** - Added support for the ARM CryptoCell 310 hardware-accelerated cryptography engine. - Added examples to show how to use the hardware-accelerated cryptography functionality. *** Changes ************ ** Overall ** - Changed the default interrupt priorities for nRF52 to be the same as the SoftDevice event priority. - Prefixed error codes with "NRF_". - Fixed a bug in the clock driver where the driver was failing to handle two requests coming from the same source. - Removed nRF52 support for RTX. RTX is now supported on nRF51 chips only. - Updated the example Secure DFU images. They are now created with the debug flag enabled. - Modified the SoftDevice header files nrf_soc.h and nrf_nvic.h to support PCA10056 (nRF52840). - Split up the files located in the examples\bsp folder to new locations: components\libraries\bsp and components\boards. ** Drivers and libraries ** - Updated the RNG driver so that it supports the SoftDevice being enabled and disabled. Removed the function nrf_drv_rng_pool_capacity(). - Changed the API for function app_button_is_pushed() (located in app_button.h). - Extended the app_gpiote API to support more than 32 pins. Removed unimplemented functions from the API. - Extended the nrf_gpio API to support more than 32 pins. Removed functions that referred to 8-bit ports (for example, nrf_gpio_port_read). - Removed the function nrf_drv_adc_gpio_to_ain() from the nrf_drv_adc API. - Removed the function nrf_drv_comp_gpio_to_ain() from the nrf_drv_comp API. - Removed the function nrf_drv_saadc_gpio_to_ain() from the nrf_drv_saadc API. ** BLE ** - Fixed an issue that would cause some central examples to fail when restarting scanning using a whitelist. - Updated the Peer Manager modules to return NRF_ERROR_STORAGE_FULL instead of NRF_ERROR_NO_MEM. - The field "peer_id" in the Peer Manager structure "pm_peer_data_bonding_t" has been renamed to "peer_ble_id". - Fixed an issue where the Database Discovery Module would not re-initialize properly upon successive discoveries. - Fixed an issue where the Database Discovery Module would fail to discover the extended properties descriptor and the characteristic user description descriptors. - Fixed an issue where the Apple Notification Center Service (ANCS) example application could crash if the connecting iPhone disconnected immediately after connecting. ** NFC ** - Modified the Adafruit NFC Shield library to support reading Type 2 and Type 4 Tags. - Improved performance of the Adafruit library in Type 2 Tag reader mode (faster read). - Added LE Secure Connections OOB values encoding in ble_pair_msg. - Enabled dynamic update of the TK value in ble_pair_msg. *** Known Issues **************** ** Overall ** - Updating the MDK requires to manually copy the header and linker files into the SDK folder (ARM Keil uVision 4, IAR Workbench, ARMGCC). - When uploading an application to an nRF52 IC using nrfjprog, you must provide the "--reset/-r" argument or powercycle the board. - RTX is not supported on nRF52 chips. ** BLE ** - Some examples might have excessively verbose logging. - In the Proximity Application, writing "High Alert" to the AlertLevel characteristic of the Link Loss Service does not trigger a high alert when the link is lost. - When an Android device is used as a peripheral, it sends slave security request with the MITM bit set. The central applications in the SDK will reject the security request (Pairing Failed) because they do not support MITM. - Eddystone Beacon Application: - Advertisement intervals are not verified. Clients must ensure that the configured advertisement interval is within the valid range. Note that EID/eTLM configurations might require advertisement intervals larger than the default value. - Caution: On nRF51 devices, eTLM calculation takes around 500 ms and is performed once per EID slot in the same interrupt level priority as the 'Unlock' functionality. Therefore, if multiple EID slots and an eTLM slot are configured, the client might not be able to unlock a beacon that has an eTLM slot and uses the default advertisement interval. To resolve this issue, increase the advertisement interval. - Buttonless DFU Template Application (experimental): - The project setup of the example is wrong and does not fit into the available space below the DFU bootloader. To fix this problem, change the IROM1 size from 0x61000 to 0x59000. In addition, comment out the code section that reserves a codepage at 0x7E000 for MBR parameters. For details, see https://devzone.nordicsemi.com/question/100609/sdk-12-bootloader-erased-after-programming/ - To switch to DFU mode, you must write to the DFU control point. However, this characteristic is set as read only. Add the following code line to enable the write property: char_md.char_props.write = 1; For details, see https://devzone.nordicsemi.com/question/93414/sdk12-ble_app_buttonless_dfu/#95079 ** NFC ** - NFC Type 2 and Type 4 Tag HAL modules require using TIMER4 on nRF52832. - Type 2 Tag on nRF52840 chips might fail unpredictably. - Some mobile phone apps cannot write Type 4 Tag ("NFC Tool" seems to be okay to use). ======================================================================== nRF5 SDK v12.1.0 ---------------- Release Date: Week 40, 2016 Highlights: - Added serialization of the S132 SoftDevice v3.0.0. Serialization of S130 is now deprecated. - Included the latest MDK v8.9.0 with a crucial workaround for nRF52832 Errata 108: http://infocenter.nordicsemi.com/topic/com.nordic.infocenter.nrf52832.Rev1.errata/anomaly_832_108.html The following toolchains/devices have been used for testing and verification: - ARM: MDK-ARM version 5.18a - GCC: GCC ARM Embedded 4.9 2015q3 - IAR: IAR Workbench 7.30.4 Supported SoftDevices: - S130 v2.0.1 - S132 v3.0.0 - S212 v2.0.0 - S332 v2.0.0 Supported IC revisions: - nRF51422/nRF51822 IC revision 3 - nRF52832 IC revision 1 Supported boards: - PCA10028 - PCA10031 - PCA10040 - PCA20006 (only for beacon examples) - Dynastream's D52 Starter Kit (only for ANT examples) - Arduino Primo v2.1 (board header only) For other devices and boards, see the SDK documentation, section "Using the SDK with other boards". *** New features **************** ** Overall ** - Serialization of the S132 SoftDevice v3.0. *** Changes *********** ** Overall ** - Includes the latest Nordic MDK v8.9.0. - Small documentation updates. *** Known issues **************** ** Overall ** - Updating the MDK requires to manually copy the header and linker files into the SDK folder (ARM Keil uVision 4, IAR Workbench, ARMGCC). - When uploading an application to an nRF52 IC using nrfjprog, you must provide the "--reset/-r" argument or powercycle the board. ** BLE ** - When performing service discoveries after a reconnect, ble_db_discovery might fail to initialize. Refer to this link for a fix: https://devzone.nordicsemi.com/question/92452/nrf52-ble_db_discovery-failed-to-initialize-correctly-when-repeats-the-service-discovery/ - The "UART/Serial Port Emulation over BLE" (ble_app_uart) example does not compile with nrf_log enabled (missing nrf_log sources) - Some examples might have excessively verbose logging. - Performing pairing without bonding will cause examples to assert. To fix this, make sure the call to pm_peer_rank_highest() during PM_EVT_CONN_SEC_SUCCEEDED happens only when the procedure is PM_LINK_SECURED_PROCEDURE_BONDING. - When an Android device is used as a peripheral, it sends slave security request with the MITM bit set. The central applications in the SDK will reject the security request (Pairing Failed) because they do not support MITM. ** Secure DFU ** - nRF Toolbox for iPhone: - When an error occurs, nRF Toolbox does not automatically disconnect. You must therefore reset the board manually to disconnect before you can connect again. - It is not possible to abort a transfer when the device connection is lost. - On resumption, nRF Toolbox does not call execute, which makes it impossible to resume a transfer. - When transferring a combined SoftDevice and bootloader image, the bootloader might not be updated. - On nRF52 devices, the DFU operation is sometimes reported as completed, even though the device is not updated. ** NFC ** - NFC Type 2 Tag HAL requires using TIMER4 on nRF52832. ------------------------------------------------------------------------ nRF5 SDK v12.0.0 ---------------- Release Date: Week 35, 2016 Highlights: - Added a secure DFU bootloader example and bootloader libraries. This is an improved implementation that replaces the legacy DFU. - Added an implementation of the Continuous Glucose Monitoring Service (CGMS). - Added support for the S132 SoftDevice v3.0.0. - Added support for the S212 and S332 SoftDevices v2.0.0. - Added a capacitive sensor driver and library (csense). - Added Gazell support on nRF52 (experimental). - Added new SDK configuration header files to manage static configuration of an application. - Overhauled the log subsystem. - Removed support for the PCA10036 board and nRF52832 Engineering A and B MCUs. - Included a critical MDK update (v8.7.1). - Added support for the CMSIS DSP library. - Missing feature: Serialization of the latest S132 SoftDevice v3.0.0 API (work in progress). The following toolchains/devices have been used for testing and verification: - ARM: MDK-ARM version 5.18a - GCC: GCC ARM Embedded 4.9 2015q3 - IAR: IAR Workbench 7.30.4 Supported SoftDevices: - S130 v2.0.1 - S132 v3.0.0 - S212 v2.0.0 - S332 v2.0.0 Supported IC revisions: - nRF51422/nRF51822 IC revision 3 - nRF52832 IC revision 1 - nRF52832 Engineering C Supported boards: - PCA10028 - PCA10031 - PCA10040 - PCA20006 (only for beacon examples) - Dynastream's D52 Starter Kit (only for ANT examples) - Arduino Primo v2.1 (board header only) For other devices and boards see the SDK documentation, section "Using the SDK with other boards". *** New features **************** ** Overall ** - Added a secure DFU bootloader example and bootloader libraries. This is an improved implementation that replaces the legacy DFU. The example includes support for cryptographically signed operations. ** Drivers and libraries ** - Added a capacitive sensor driver and library for nRF51 and nRF52 based systems. - Added an app_timer profiler to get maximum operation queue usage. - Reduced RAM usage in app_timer and changed the app_timer_cnt_get function (see the migration note in the Timer library documentation). - Added pull-up configuration to the TWIS driver. - Added an FFT FPU example with the CMSIS DSP library. ** BLE ** - Added a Continuous Glucose Monitoring Service (CGMS) implementation, including an example application (experimental). - Added a Bond Management Service (BMS) implementation, including an example application (experimental). - Expanded APIs to support Privacy 1.2. - Updated Direct Test Mode (DTM), including support for nRF52. ** ANT ** - Added new examples: Continuous Waveform Mode, High Duty Search and Background Scanning, and Time Synchronization. ** NFC ** - Added an NFC BSP module (bsp_nfc) and an example showing the usage of NFC as a wakeup source. ** Proprietary ** - Gazell: Ported examples and library to nRF52 (experimental). *** Changes *********** ** Overall ** - Added a new log system across all SDK sources. Replaced printf and the old log system. ** Drivers and libraries ** - Unified the configuration subsystem and moved configuration to one file (sdk_config.h). - Changed the NRF51 and NRF52 ifdefs in drivers to peripheral related ifdefs. - Improved the PWM library (app_pwm): SET/CLEAR tasks instead of TOGGLE in nRF52. - Updated the TWI driver to de-configure GPIO pins in the uninit function (power-saving change). - Unified field names in HAL. - FreeRTOS fixes: - Fixed invalid assertion. - Improved tickless mode. - Simplified the TWI sensor example. - Added PCA10031 support to the led_softblink and low_power_pwm examples. ** Serialization ** - No support. ** BLE ** - Removed the Device Manager modules. All example applications now use the Peer Manager. - Removed the pstorage module. All example applications now use the fstorage module. ** ANT ** - Moved the following examples from experimental to production level: - Advanced Burst - Asynchronous Transmitter - Continuous Scanning Controller - Debug - Message Types - Relay - Search Sharing - Search Uplink ** NFC ** - Moved BLE OOB Pairing Data encoding to a separate module (nfc_ble_oob_advdata). - Modified nfc_t2t_lib and hal_nfc_t2t to conform with Nordic's coding standard. *** Fixed issues **************** ** Drivers and libraries ** - APP_FIFO: Fixed an issue with app_fifo_write writing one byte even though it was requested to write zero bytes. - APP_BUTTON: Memory improvements. - GPIOTE: Fixed handler pointer checking. - PDM: Fixed high power usage and unexpected restart after calling nrf_drv_pdm_stop(). - QDEC: Fixed QDEC un-initialization sequence. - SAADC: Added missing channel calibration. - SAADC: Fixed high power consumption and burst mode (oversampling without external trigger). - SPI: Fixed STOPPED interrupt handling. - SPIS: Fixed registers in get function of the amount of TX and RX done. - TWI: Fixed misc sending bytes and misleading error codes. - TWI: Added pin toggling functionality configuration during init (pin toggling sequence during init may cause issues with some devices). - UART: Fixed data corruption at 1 Mbaud and race conditions. - DELAY: Fixed nrf_delay_us(0) case. ** BLE ** - Fixed an issue where BLE example applications could assert if Button 2 was held to start advertising while in a connection. - Fixed several minor documentation mistakes that could make testing the BLE examples less clear. ** ANT ** - Fixed channel type setup in the following examples: Broadcast, Multi Channels, and Continuous Scanning Controller. ** NFC ** - NDEF Text record: Fixed UTF selection. - NDEF message size calculation. *** Known issues **************** ** Overall ** - Updating the MDK requires to manually copy the header and linker files into the SDK folder (ARM Keil uVision 4, IAR Workbench, ARMGCC). - When uploading an application to an nRF52 IC using nrfjprog, you must provide the "--reset/-r" argument or powercycle the board. ** BLE ** - Some examples might have excessively verbose logging. - Performing pairing without bonding will cause examples to assert. To fix this, make sure the call to pm_peer_rank_highest() during PM_EVT_CONN_SEC_SUCCEEDED happens only when the procedure is PM_LINK_SECURED_PROCEDURE_BONDING. - When an Android device is used as a peripheral, it sends slave security request with the MITM bit set. The central applications in the SDK will reject the security request (Pairing Failed) because they do not support MITM. ** Secure DFU ** - nRF Toolbox for iPhone: - When an error occurs, nRF Toolbox does not automatically disconnect. You must therefore reset the board manually to disconnect before you can connect again. - It is not possible to abort a transfer when the device connection is lost. - On resumption, nRF Toolbox does not call execute, which makes it impossible to resume a transfer. - When transferring a combined SoftDevice and bootloader image, the bootloader might not be updated. - On nRF52 devices, the DFU operation is sometimes reported as completed, even though the device is not updated. ** NFC ** - NFC Type 2 Tag HAL requires using TIMER4 on nRF52832. ======================================================================== nRF5 SDK v11.0.0 ---------------- Release date: Week 10, 2016 Highlights: - Combined SDK supporting both the nRF51 and the nRF52 Series - Moved Peer Manager out of experimental - Moved NFC libraries out of experimental and added support for low power mode - Added drivers for all nRF52 peripherals - Added serialization of the S132 and S130 SoftDevices - Added support for SoftDevices S130 v2.0.0, S132 v2.0.0, S212 v0.9.x, and S332 v0.9.x - Replaced the Enhanced ShockBurst library with a new implementation (based on µESB) - Included a critical MDK update (v8.5.0) - Removed support for CMSIS Packs The following toolchains/devices have been used for testing and verification: - ARM: MDK-ARM version 5.16a - GCC: GCC ARM Embedded 4.9 2015q1 - IAR: IAR Workbench 7.30.4 Supported SoftDevices: - S130 v2.0.0 - S132 v2.0.0 - S212 v0.9.x - S332 v0.9.x Supported IC revisions: - nRF51 IC revision 3 - nRF52 IC revision 1 - nRF52 Engineering C - nRF52 Engineering A and Engineering B (see Compatibility) Supported boards: - PCA10028 - PCA10031 - PCA10036 (see Compatibility) - PCA10040 (see Compatibility) - PCA20006 (only for beacon examples) For other devices and boards, see the SDK documentation, section "Using the SDK with other boards". Compatibility: The SoftDevices that are supported in this SDK are not compatible out-of-the-box with nRF52 Engineering A and Engineering B (the IC revisions present on all versions of PCA10036 and on PCA10040 v0.9.0). However, you can use the latest SoftDevices on Engineering A and B nRF52 chips for development purposes if you implement the workaround for anomaly 73 (TIMER: Event lost, see http://infocenter.nordicsemi.com/topic/com.nordic.infocenter.nrf52/dita/nrf52/errata.html). *** New features **************** ** Drivers and libraries ** - Added a COMP driver (nRF52 only) ** BLE ** - Extended the Peer Manager functionality: - Added an additional data unit (Peer Rank) that can be used for tracking which bonds are most (and least) recently used - Added support for LE Secure Connections in Peer Manager (experimental) - Added an example application for LE Secure Connections (experimental, support for Keil5, IAR, and GCC only) ** ANT ** - Added new examples (experimental): - Advanced Burst - Asynchronous Transmitter - Continuous Scanning Controller - Debug Demo - IO Demo - Message Types - Search Sharing - Search Uplink - ANT OTA bootloader application now uses the SoCLibrary API to perform NVIC operations instead of direct operations - Added multiprotocol examples for the S332 SoftDevice: - Heart Rate Monitor Relay Application - Shared Channels (experimental) ** Serialization ** - Added serialization of the S130 and S132 v2.0.0 SoftDevices ** NFC ** - Added a generic NDEF message parser that can parse NDEF messages to the format that is used by the generic NFC NDEF message builder - Added a module and example for creating NDEF text records - Added and modified NFC pairing examples (experimental): - HID Keyboard Application with BLE pairing using NFC (new) - Heart Rate Application with BLE pairing using NFC (improved user experience) ** Proprietary ** - Added a Low Power Transmitter/Receiver example for ESB *** Changes *********** ** Overall ** - Support for CMSIS Packs has been removed. The SDK is delivered as zip file only. ** Drivers and libraries ** - The MSB and LSB macros have been renamed to MSB_32 and LSB_32. Code using these macros should be changed to use either the 16- or the 32-bit variant. ** BLE ** - Multi-instance handling of Service client modules has been greatly improved. The client examples now handle service discovery in the main application context. The main application context must manage which client instance belongs to which connection link. - The Multi-link Example has been modified to demonstrate multiple client instances in a better way. - The ble_app_multilink_peripheral example has been removed. ble_app_blinky now acts as the peripheral for ble_app_multilink_central. - Heart Rate Application with RTX: Support for nRF52 has been removed. - The Peer Manager is no longer experimental. - The following BLE examples now use Peer Manager: - Central: Running Speed and Cadence Collector (ble_app_rscs_c) - Central and Peripheral: BLE Relay (ble_app_hrs_rscs_relay) BLE LE Secure Connections Multirole (ble_app_multirole_lesc) - Peripheral: Alert Notification (ble_app_alert_notification) Proximity (ble_app_proximity) Glucose (ble_app_gls) HID Keyboard Application with BLE pairing using NFC (experimental_ble_app_hids_keyboard_pairing_nfc) - The behavior of Peer Manager and Device Manager has changed to reject pairing requests from already bonded peer centrals. - Several BLE peripheral examples now support the S332 SoftDevice. - Minor bugfixes in DFU. ** ANT ** - The ANT bootloader was aligned to MBR version 2.0.0. - The following ANT examples now support the S332 SoftDevice (experimental): - ANT Bootloader/DFU - Message Types ** NFC ** - The Adafruit Tag Reader Example has been extended to show added NDEF parsing functionality. - The NFC Type 2 Tag HAL was improved with a workaround for supporting low power mode. ** Proprietary ** - A new implementation of the Enhanced ShockBurst (ESB) protocol supporting both nRF51 and nRF52 has been added. *** Fixed issues **************** ** Drivers and libraries ** - GPIOTE: Fixed the problem of lost events in low-accuracy sense toggle mode - SAADC: Added functionality to use one AIN with multiple channels - UART: Fixed a glitch on TX pin when initializing the driver - UART: Fixed the problem that TX bytes were sent in wrong order in app_uart_fifo ** BLE ** - Removed a vulnerability in Peer Manager and Device Manager that would allow malicious attackers to overwrite the bonding information of a bonded device ** ANT ** - Fixed the handling of send-until-success request types in the ANT request controller - Fixed an ant_evt_t structure member alignment bug ** NFC ** - Fixed the NFC examples to work when the UART logger is enabled - Fixed a buffer leakage bug in the module for creating application/vnd.bluetooth.le.oob records *** Known issues **************** ** Drivers and libraries ** - Using the NVIC API directly and not through a SoftDevice causes problems, especially when NVIC_EnableIRQ or NVIC_DisableIRQ are called from critical sections. ** BLE ** - All BLE examples have been tested only on PCA10028 and PCA10040. - BLE Examples that use pairing are incompatible with examples in SDK version 6.1 and earlier that do not use pairing. ** ANT ** - Previous versions of the ANT DFU example are incompatible with the ANT S212/S332 SoftDevices version 0.9.x. ** NFC ** - NFCT requires using TIMER4 on nRF52832. ** FPU ** - When the FPU is in use, it triggers the FPU_IRQn interrupt when one of the six exception flags (IDC, IXC, UFC, OFC, DZC, IOC) is set. The FPU interrupt will always set the pending flag (even if the interrupt is not enabled), irrespective of whether the user is interested in the exception bit. The pending flag then prevents the SoftDevice from going into low power mode when sd_app_evt_wait() is called. Therefore, always clear the exception bits and the pending interrupt before calling sd_app_evt_wait(). See the code below for an example implementation. FPU exception bit definition: http://infocenter.arm.com/help/index.jsp?topic=/com.arm.doc.dui0553a/BABBFJEC.html Example code: { // Set bit 7 and bits 4..0 in the mask to one (0x ...00 1001 1111) #define FPU_EXCEPTION_MASK 0x0000009F ... /* Clear exceptions and PendingIRQ from the FPU unit */ __set_FPSCR(__get_FPSCR() & ~(FPU_EXCEPTION_MASK)); (void) __get_FPSCR(); NVIC_ClearPendingIRQ(FPU_IRQn); /* Call SoftDevice Wait For event */ error_code = sd_app_evt_wait(); } ======================================================================== nRF5 SDK v11.0.0-2.alpha ------------------------ Release date: Week 51, 2015 Highlights: - Common SDK supporting both the nRF51 and the nRF52 Series - Added support for SoftDevices S130 v2.0.0, S132 v2.0.0, and S212 v0.5.1 - Permanently removed support for SoftDevices S110 and S120 - Temporarily removed support for ANTBLE SoftDevices - Enhanced Peer Manager and FDS modules - Enhanced DFU module - Configured nrf_log to use UART by default - Added HardFault handler - Added drivers for nRF52 peripherals: nrf_drv_i2s, nrf_drv_pdm, nrf_drv_pwm - Enhanced drivers to work for both nRF51 and nRF52: nrf_drv_twi, nrf_drv_spi, nrf_drv_uart, nrf_drv_timer, nrf_drv_ppi, nrf_drv_clock - Added FreeRTOS and RTX support for nRF52 - Added NFC modules: Type 2 Tag parser, generic NDEF message builder, new NFC records and messages - Added support for Adafruit PN532 NFC shield to provide NFC Forum Device (Poller) functionality - Improved support for NFC: enhanced NFC Type 2 Tag library and Connection Handover module The following toolchains/devices have been used for testing and verification: - ARM: MDK-ARM version 5.16a - GCC: GCC ARM Embedded 4.9 2015q1 - IAR: IAR Workbench 7.30.4 - Windows XP SP3 32-bit - Windows 7 SP1 64-bit - Windows 8.1 Supported SoftDevices: - S130 v2.0.0-7.alpha - S132 v2.0.0-7.alpha - S210 v5.0.0 - S212 v0.5.1.alpha Supported boards: - PCA10028 - PCA10031 - PCA10036 - PCA10040 - PCA20006 (only for beacon examples) - Dynastream's N5DK1 (only for ANT examples) For other devices and boards, see the SDK documentation, section "Using the SDK with other boards". Drivers and libraries: New features: - Added driver and example for PWM peripheral (nrf_drv_pwm). - Added driver and example for I2S peripheral (nrf_drv_i2s). - Added driver for PDM peripheral (nrf_drv_pdm). - Enhanced nrf_drv_twi and nrf_drv_spi to support AUTOLOG and triggering transfers from PPI. - Added double buffering of RX buffers to nrf_drv_uart. - Extended nrf_drv_timer to support more compare channels and low power counter mode in nRF52. - Extended nrf_drv_ppi API to support forks. - Added support for FreeRTOS and RTX on nRF52. - Simplified SPI and SPIS examples. Fixed issues: - In certain cases, FreeRTOS on nRF51 kept interrupts disabled after context switch (see https://devzone.nordicsemi.com/question/57993/tickless-freertos-in-sdk-100-app_uart). Known issues: - The FreeRTOS nRF51 port has a wrong assertion during system startup. If you are using assertions, you can safely ignore it. Alternatively, comment out line 188 in port_cmsis.c. Changes: - Enhanced nrf_drv_clock driver (asynchronous clock management). Serialization: - Work in progress; not included in this release. ANT: New features: - Added support for the S212 SoftDevice v0.5.1.alpha. - Added ANT DFU support for nRF52. Known issues: - When using the ANT OTA Updater v1.2. for nRF52, there is a flash memory address limitation of 0x40000 (256 KB) for the application. BLE: Changes: - All BLE examples have been tested only on PCA10028 and PCA10040. - The S13x SoftDevice v2.0.0-7.alpha is configurable, which leads to a variable RAM setup: - Added a macro to the softdevice_handler module to check the RAM configuration against the SoftDevice parameters. - Added a wrapper function for the sd_enable function to the softdevice_handler module, which can output the required RAM start address if the one passed to the SoftDevice is not correct. - DFU: - Added an experimental nRF52 bootloader. - Updated the SoftDevice initalization according to API changes in S132 v2.0.0-7.alpha. - Updated to MBR version v2.0.0-1 alpha. - Introduced nrf_log as default logging module (UART) in all BLE examples. - Peer Manager & FDS have received incremental improvements and bug fixes. Known issues: - In the HRS/RSCS Relay example, button presses do not have any effect. - ble_app_cts_c requires an increased UART_TX_BUF_SIZE. The size can be set in nrf_log.c. - DTM for nRF52 does not support long packets according to the Bluetooth 4.2 specification. - Inconsistent behavior in DFU with devices running Android v6.0.1. - The BLE and serial DFU examples do not work when using CMSIS Packs. Use the zip version of the SDK instead. NFC: New features: - Added a Type 2 Tag parser. - Added a generic NFC NDEF message builder (the builder is used to implement all specific records and messages). - Added modules to create Windows LaunchApp records, Android Application Records, and common application launch messages. Added an associated example. - Ported the Adafruit NFC library for the Adafruit PN532 Shield, which provides NFC Forum Device capabilities. Added an associated example to read tags. - Added modules to create application/vnd.bluetooth.le.oob records, application/vnd.bluetooth.ep.oob records, ac records, Hs records, and BLE pairing messages. Changes: - Improved the NFC Type 2 Tag library: tested and power-optimized the library and enhanced it with RTT logger capability. - Re-implemented NFC URI record and message. Refactored the associated example. - Enhanced and re-implemented the NFC Connection Handover solution (pairing using NFC). - Re-implemented the BLE NFC pairing example. Known issues: - NFC examples do not work when UART logger is enabled. ======================================================================== nRF51 SDK v10.0.0 ----------------- Release date: Week 46, 2015 Highlights: - New BLE Peer Manager (experimental), replacement for the BLE Device Manager - FreeRTOS support - New ANT modules, additional examples, and new and expanded ANT+ profiles - Support for Dynastream's N5 Starter Kit - Three new BLE Services - Precompiled HEX files The following toolchains/devices have been used for testing and verification: - ARM: MDK-ARM version 5.14.0.0 and 5.16a - GCC: GCC ARM Embedded 4.9 2015q1 - IAR: IAR Workbench 7.30.4 - Windows XP SP3 32-bit - Windows 7 SP1 64-bit - Windows 8.1 Supported SoftDevices: - S110 v8.0.0 - S120 v2.1.0 - S130 v1.0.0 - S210 v5.0.0 - S310 v3.0.0 Supported boards: - PCA10028 - PCA10031 - Dynastream's N5DK1 (only for ANT examples) For other devices and boards, see the SDK documentation, section "Using the SDK with other boards". Changes: Drivers and libraries: New features: - Ported FreeRTOS to run on nRF51. Added two FreeRTOS examples: one to run on bare metal and one running a BLE HRS example using the S110 and S130 SoftDevices. - Added a TWI transaction manager module for managing access to an I2C bus. Added an example that uses this module to control two sensors on the same I2C bus. - Added an example that shows how to use the TWI driver. - Added a low-power PWM module (software-controlled low-accuracy PWM). Added an example that shows how to use this module. - Added an LED softblink module that uses the low-power PWM. Added an example that shows how to use this module. - Ported app_uart to use the UART driver and moved it to the libraries folder. - Ported app_gpiote to use the GPIOTE driver. - Added nrf_log, a logging module that supports printf and that can use either UART or SEGGER RTT as transport medium. Fixed issues: - Mailbox module moved out of serialization. - Bug fixes in app_timer module. - App_timer module no longer requires to define the number of timers used in the application. - Bug fixes in PWM module. Changes: - FIFO library: Extended APIs for multi-byte read and write to the FIFO. - Memory Manager module: - Extended number of block categories to 7 (from 3). - More RAM-efficient management of memory blocks. - Added a diagnostic function to help determine the right configuration needed for the application. Serialization: New features: - Added a command for resetting the connectivity chip. ANT: New features: - Added the following new ANT modules: - ant_encryption - ant_key_manager - ant_search_config - Extended/changed the following existing ANT modules: - ant_channel_config - ant_stack_config - ant_state_indicator - Refactored the ANT/ANT+ examples and profiles to make them look more similar to the BLE profiles and examples: - The following ANT+ profiles have been extracted and extended: Bicycle Power (ant_bpwr), Bicycle Speed & Cadence (ant_bsc), Stride Based Speed & Distance (ant_sdm) - All ANT+ examples have been refactored to use extracted profiles. - All ANT+/ANT examples have been refactored to use created modules. - Added three new ANT examples: - ant_scalable - ant_scalable_encrypted - ant_scan_and_forward BLE: - Added an experimental module named Peer Manager. This module will eventually replace the existing Device Manager. The new Peer Manager improves on the Device Manager in multiple ways, mainly by supporting concurrent central and peripheral connections. - Added an experimental flash memory module named Flash Data Storage (FDS), which greatly reduces the need for time-consuming write and clear operations. When using FDS, data can be arbitrarily long or short (within about a page). All pieces of data are tagged with types, which makes it easy to version data. - Updated the experimental HRS/RSCS Relay example: - It now uses the new Peer Manager instead of the Device Manager. Therefore, it now supports bonding in both central and peripheral roles. - It uses the new nrf_log module, which can use SEGGER RTT. - Removed the app_s130_demo example. - Added an experimental example supporting the Eddystone beacon format. - Added the BLE Connection State module, which keeps track of certain states of each connection (for example, whether it is encrypted) and can also keep track of user-defined states. - Added the Mapped Flags module, which keeps track of flags that are mapped to keys. It is used by the BLE Connection State module. - Added ble_gatt_db.h (containing a GATT service structure) and modified ble_db_discovery module to use it. BLE Services: - Updated the Bluetoothds_template application (experimental) to be compatible with Bluetooth Developer Studio v1.0 and the Nordic Semiconductor NRF5X v1.1.8 plugin. - Added three new services: - Location Navigation Service (experimental) - Proprietary LED Button Service (experimental) - Nordic UART Client Service (experimental) Fixed issues: - App_pwm occasionally gives inverted signal. Known issues: - Device Manager is not supported in multi-role S130 operation. - Device Manager works in peripheral or central only operation on S130. This must be decided at compile time. - The DFU over BLE example has been tested to work with a minimum connection interval of 11.25 ms. The application cannot handle connection intervals lower than 11.25 ms and may undergo a system reset in the middle of a firmware update. Workaround: If you face unexpected disconnects during the firmware update process, consider increasing the connection interval used by the master. - The old manual procedure for testing buttonless DFU, as specified in the documentation, can lead to the DFU process hanging or returning an error when used with Master Control Panel 3.8 and newer. - Bootloader binaries (.bin files) generated with the GCC makefile should not be used. Instead, generate the bootloader bin files using nrfutils, found on GitHub. ======================================================================== nRF52 SDK v0.9.2 ---------------- Release date: Week 42, 2015 This is an amendment to nRF52 SDK v0.9.1. Highlights: - New targets to enable the two near field communication (NFC) examples to run on the new PCA10040 development board with nRF52832 IC rev. Engineering B. Libraries: - Extended the NFC HAL layer of the NFC library to support the NFCT peripherial for both the chip version delivered with the nRF52 Preview Development Kit (Engineering A: QFAA-AA0, QFAA-AC0, CGAA-AA0) and the chip version delivered with the nRF52 Development Kit (Engineering B: QFAA-BA0, QFAA-BB0, CHAA-AA0, CHAA-AB0). Examples: - Added PCA10040 as target bord for the following examples: - Heart Rate Example with pairing over NFC - NFC URL Record Application Known issues/workarounds: - To use the software workarounds implemented for PCA10036 (part of nRF52 Preview Development Kit), globally define HAL_NFC_ENGINEERING_A_FTPAN_WORKAROUND in your project. - The TIMER4 peripheral is used to implement one of the workarounds for PCA10036. This workaround is not used for PCA10040. - The ble_app_hrs_pairing_nfc example is unable to wake up from system off. ======================================================================== nRF52 SDK v0.9.1 ---------------- Release date: Week 29, 2015 This is an amendment to nRF52 SDK v0.9.0. Highlights: - Support for near field communication (NFC) Libraries/Services: - Added a library that supports Type 2 NFC-A tag functionality in read-only state - Added a module to generate NFC NDEF messages for BLE pairing over NFC - Added a module to generate NFC NDEF messages with an URI record type - Extended the ble_advdata module Examples: - Added ble_app_hrs_pairing_nfc example that demonstrates pairing over NFC (with S132 SoftDevice) - Added record_url NFC example that demonstrates exposing a URL record (without SoftDevice) Limitations: - The current version of the NFC library uses TIMER4. - The ble_app_hrs_pairing_nfc example has been tested only with Samsung Galaxy S6. - If the path to the SDK directory is too long, compilation in Keil fails. To work around this problem, move the SDK higher in the folder tree or use shorter folder names. ======================================================================== nRF51 SDK v9.0.0 ---------------- Release Date: Week 28, 2015 Highlights: - Support for S210 SoftDevice v5.0.0 - Support for S310 SoftDevice v3.0.0 - Documentation moved to Infocenter - DFU Signing using Elliptic Curve Cryptography added as experimental - Available in the zip file only - Running Speed and Cadence relay example showing concurrent central/peripheral functionality of S130 The following toolchains/devices have been used for testing and verification: - ARM: MDK-ARM version 5.14.0.0 - GCC: GCC ARM Embedded 4.9 2015q1 - IAR: IAR Workbench 7.20 - Windows XP SP3 32-bit - Windows 7 SP1 64-bit - Windows 8.1 Supported SoftDevices: - S110 v8.0.0 - S120 v2.1.0 - S130 v1.0.0 - S210 v5.0.0 - S310 v3.0.0 Supported boards: - PCA10028 - PCA10031 For other devices and boards, see the SDK documentation, section "Using the SDK with other boards". Changes: - Flash access module has been refactored (pstorage). ANT: - Both the S310 and the S210 SoftDevices now support an extended number of ANT channels (16). Libraries: - Heart Rate Monitor Profile - ANT stack configuration - ANT channel configuration - ANT channel state indicator - ANT pulse simulator Examples: - The ANT HRM examples have been refactored. - The Bicycle Power examples (ant_bicycle_pwr) support S310. ANT + BLE (S310): The following examples were added: - Bluetooth LE and ANT combined heart rate example (ble_ant_app_hrm). - Experimental ANT Shared Channels (experimental_ant_shared_channel_master_to_master, experimental_ant_shared_channel_slave). BLE: - Advertising module has a new mode: Low Duty Cycle Directed Advertising. - Running Speed and Cadence Client added as experimental. - Bluetooth Developer Studio template added as experimental. - Heart Rate Sensor example (ble_app_hrs) supports S310. - Running Speed and Cadence example (ble_app_rscs) supports S310. - Combined Peripheral and Central example added as experimental. - DFU Signing using Elliptic Curve Cryptography added as experimental (using the same elliptic curve and hashing algorithm as Bluetooth Low Energy 4.2 Secure Connections). Fixed issues: - Pstorage now supports updates of bond split across two pages. - Advertising module can be set to infinite time-out. - Corrected clock source in BLE multiactivity beacon example. - Serialization HCI transport layer: Receiving packet-buffer is not freed while sending ACK or NACK. Known issues: - Device Manager is not supported in multi-role S130 operation. - Device Manager works in peripheral or central only operation on S130. This must be decided at compile time. - The DFU over BLE example has been tested to work with a minimum connection interval of 11.25 ms. The application cannot handle connection intervals lower than 11.25 ms and may undergo a system reset in the middle of a firmware update. Workaround: If you face unexpected disconnects during the firmware update process, consider increasing the connection interval used by the master. - App_pwm occasionally gives inverted signal. - The old manual procedure for testing buttonless DFU, as specified in the documentation, can lead to the DFU process hanging or returning an error when used with Master Control Panel 3.8 and newer. ======================================================================== nRF52 SDK v0.9.0 ---------------- Release date: 17.06.2015 Highlights: - Support for PCA10036 board v1.0.0 with nRF52832 QFAAAA - Support for S132 SoftDevice v1.0.0-3.alpha (hex included) - Support for S212 SoftDevice v0.2.0-1.alpha - Support for Keil5 without CMSIS Packs - Support for GCC - Same structure as nRF51 SDK v8.1.0 - New peripheral drivers - Documentation moved to Infocenter The following toolchains/devices have been used for testing and verification: - ARM: MDK-ARM version 5.14.0.0 - GCC: GCC ARM Embedded 4.9 2015q1 - Windows 7 SP1 64-bit Supported SoftDevices: - S132 v1.0.0-3.alpha - S212 v0.2.0-1.alpha Supported boards: - PCA10036 v1.0.0 Examples: - Most examples are ported from nRF51 SDK v8.1.0 - BLE examples run with the S132 SoftDevice - ANT examples run with the S212 SoftDevice - The following examples are included: - BLE peripheral examples - BLE central example - New BLE combined central and peripheral example - ANT examples - HW peripheral examples - New SAADC example - New TWI master with TWI slave example - BLE/serial DFU bootloader - Direct Test Mode Application Drivers: - Includes all drivers from nRF51 SDK v8.1.0 - New drivers: - SPI driver that supports SPI and SPIM - UART driver that supports UART and UARTE - SAADC HAL driver - TWI slave driver - SAADC driver Libraries/Services: - Same functionality as for nRF51 SDK v8.1.0 - The following libraries and services are included: - BLE libraries - BLE Services - Transport Services - Other libraries/components Known issues: - Device might reset when a Bluetooth link layer procedure and flash operation happens in parallel. - Inconsistent behavior with Nexus devices running Android v5.1.1, for example: - DFU fails - Link loss might reset the nRF52 device (such behavior might occur with other devices as well) - After a power cycle, a UART lockup between Segger J-Link and nRF52 might occur - Before a serial DFU operation or DTM can be executed, "nrfjprog --reset" must be run ======================================================================== nRF51 SDK v. 8.1.1 ------------------ This is a supplement to the nRF51 SDK v8.1.0 release notes. This release does not include any code changes compared to nRF51 SDK v8.1.0., except for a minor addition that is described in the "Changes" section. Fixed issues: - Project does not compile if nrf_drv_ppi is used together with SoftDevice S110, S120 or S210. Issue exists only in CMSIS PACK release. Changes: - Released new SoftDevice packs: nRF_SoftDevice_S110.8.0.1, nRF_SoftDevice_S120.2.0.1 and nRF_SoftDevice_S210.4.0.1-5 with updated nrf_sd_def.h. Supported SoftDevices: - S110 8.0.0 - S120 2.0.0 - S130 1.0.0 - S210 4.0.1 ======================================================================== nRF51 SDK v8.1.0 ---------------- Highlights: - Support for SoftDevice S130 v1.0.0 - Serialization supporting SoftDevice S110, S120, and S130 - ANCS updated and no longer in experimental state - GCC updated to new version: ARMGCC 4.9 q1-2015 - DFU example now has support for IAR and GCC The following toolchains/devices have been used for testing and verification: - ARM: MDK-ARM version 4.72.10, 5.13.0.0, 5.14.0.0 - GCC: gcc-arm-embedded 4.9 2015q1 - IAR: IAR Embedded Workbench for ARM version 7.20.2 - Windows XP SP3 32-bit - Windows 7 SP1 64-bit - Windows 8.1 Supported devices: - This SDK is optimized for IC revision 3. For details, see the "nRF51 Series Compatibility Matrix" document (ATTN-51) available on www.nordicsemi.com. Note 1: To run the ANT examples, you must use an nRF51422 device. Note 2: Some of the examples using the SoftDevice will not fit on the 128 kB variant of the chip. Supported SoftDevices: - S110 8.0.0 - S120 2.0.0 - S130 1.0.0 - S210 4.0.1 Supported boards: - PCA10028 - PCA10031 For other devices and boards, see the SDK documentation, section "Using the SDK with other boards", or use SDK v6.x.x. Changes: ANT + BLE (dual stack): - Not included in this release due to conflicting interface between SoftDevice S310 and S110. Use SDK v7.2.0 for S310 support. - S310 support will be reintroduced in a future release. BLE: - SoftDevices: - Support for S130 v1.0.0. - Serialization: - Fully serialized S110, S120, and S130 API. - Modules/Services: - New button module (bsp_btn_ble) that enables functionality such as disconnect, turn off whitelist, go to sleep. - Advertising module now supports scan response data - Examples: - ANCS example is no longer in experimental state. Proprietary: - IAR support for proprietary examples. Peripheral drivers & libraries: - New peripheral drivers: TWI, SWI, and GPIOTE. - New PWM driver. PWM example updated to use the driver. Fixed issues: - NRFFOSDK-2044: Fixed issue in app_gpiote. - NRFFOSDK-3855: Fixed issue in Current Time Service. Known issues: - Device Manager is not supported in multirole S130 operation. - Device Manager works in peripheral or central only operation on S130. This must be decided at compile time. - The DFU over BLE example has been tested to work with a minimum connection interval of 11.25 ms. The application cannot handle connection intervals lower than 11.25 ms and may undergo a system reset in the middle of a firmware update. Workaround: If you face unexpected disconnects during the firmware update process, consider increasing the connection interval. - ANT: - NRFFOSDK-755: HRM TX buttons example may report wrong total elapsed time. - BLE: - A few APIs of the Device Manager are not implemented. Also, documentation providing examples of how the API can be used is missing. - NRFFOSDK-2824: Device Manager (pstorage) does not support update of bond split across two pages. - Proprietary: - The nRF24Lxx ESB examples found in the legacy nRFready SDKs do not work out of the box with the nRF51 ESB examples. This is due to: - The legacy examples do not use "payload in ACK". - The legacy examples use RF channel 2 (not 10 as the nRF51 examples). - The examples do not use dynamic payload length. The legacy examples need to add the following to work with the nRF51 examples: hal_nrf_setup_dynamic_payload(0xFF); hal_nrf_enable_dynamic_payload(true); hal_nrf_enable_ack_payload(true); hal_nrf_set_rf_channel(10); In addition, the legacy PTX example must add code for handling the payloads received in ACK. - The Gazell Link Layer examples are not fully "out of the box" compatible with the legacy Gazell examples provided in the nRFgo SDK for nRF24Lxx devices. The timeslot periods and channel tables require adjustment. - Timeslot period: Edit the gzll_params.h file used in the nRF24Lxx projects or use the nrf_gzll_set_timeslot_period() function in the nRF51 projects (nRF51 Gazell timeslot period = 0.5*GZLL_RX_PERIOD). - Channel table: Edit the gzll_params.h file used in the nRF24Lxx projects or use the nrf_gzll_set_channel_table() function in the nRF51 projects. - Gazell does not support "Low Power Host mode" (Host mode 1). ======================================================================== nRF51 SDK v8.0.0 ---------------- Highlights: - Support for the latest S110, S120, and S130 SoftDevices. (S310 is not supported.) - SoftDevices included in the SDK. - Greatly increased driver and HAL coverage. - New service client and profile example: Current Time Service/Time Profile. - IAR support for most examples. The following toolchains/devices have been used for testing and verification: - ARM: MDK-ARM Version 4.72.10, 5.13.0.0, 5.14.0.0 - GCC: gcc-arm-embedded 4.7 2013q1 - IAR: IAR Embedded Workbench for ARM version 7.20.2 - Windows XP SP3 32-bit - Windows 7 SP1 64-bit - Windows 8.1 Supported devices: - This SDK is optimized for IC revision 3. For details, see the "nRF51 Series Compatibility Matrix" document (ATTN-51) available on www.nordicsemi.com. Note 1: To run the ANT examples, you must use an nRF51422 device. Note 2: Some of the examples using the SoftDevice will not fit on the 128 kB variant of the chip. Supported SoftDevices: - S110 8.0.0 - S120 2.0.0 - S130 0.9.0-1.alpha - S210 4.0.1 Supported boards: - PCA10028 - PCA10031 For other devices and boards, see the SDK documentation, section "Using the SDK with other boards", or use SDK v6.x.x. Changes: Toolchain/IDE: - The nRF51 SDK now supports the following toolchains in most examples: - Keil 5.14 (with packs) - Keil 5.14 (without packs) - Keil 4.72.10 - ARM GCC 4.7 2013q1 - IAR 7.20.2 - The supported SoftDevices are now included in the SDK and can be flashed directly from Keil, as a separate target. ANT + BLE (dual stack): - Removed support for the S310 SoftDevice for BLE API compatibility reasons. For support, use SDK v7.2.0. BLE: - SoftDevices: - The SDK now supports the S110 SoftDevice v8.0.0. - The SDK now supports the S120 SoftDevice v2.0.0. - The SDK now supports the S130 SoftDevice v0.9.0-1.alpha. - Serialization: - Serialization support has been removed. For support, use SDK v7.2.0 with appropriate SoftDevices. - Modules/Services: - Added a new advertising module (ble_advertising) that provides automatic handling of directed/fast/slow advertising, with and without whitelist. - Nordic UART Service (ble_nus), detached from the UART over BLE Example. - Added Current Time Service Client (ble_cts_c). - Service Changed characteristic has been implemented for DFU, so that the indication is sent when transitioning between application and bootloader. - Implemented a mechanism for sharing of IRK and LTK from application to bootloader. This allows for whitelist advertising and reconnection in DFU mode using existing keys. - Examples: - The UART over BLE Example is no longer experimental. - Added a Time Profile (ble_app_cts_c) example using the Current Time Service Client implementation. Drivers/Libraries: - Added hardware abstraction layer for the following hardware peripherals: - ADC (Analog-to-digital converter) - CLOCK (Clock management) - LPCOMP (Low power comparator) - PPI (Programmable Peripheral Interconnect) - QDEC (Quadrature decoder) - RNG (Random number generator) - RTC (Real time counter) - TIMER (Timer/counter) - WDT (Watchdog timer) - Added drivers for the following peripherals: - CLOCK (Clock management) - LPCOMP (Low power comparator) - PPI (Programmable Peripheral Interconnect) - QDEC (Quadrature decoder) - RNG (Random number generator) - RTC (Real time counter) - TIMER (Timer/counter) - WDT (Watchdog timer) - Added modules: - app_simple_timer (Simple timer based on TIMER1) Hardware Examples: - Added: - adc_simple (NRF_ADC) - clock (NRF_DRV_CLOCK) - lpcomp (NRF_DRV_LPCOMP) - qdec (NRF_DRV_QDEC) - simple_timer (APP_SIMPLE_TIMER) - wdt (NRF_DRV_WDT) - Modified: - ppi (NRF_DRV_PPI) - rng (NRF_DRV_RNG) - rtc (NRF_DRV_RTC) - timer (NRF_DRV_TIMER) Fixed issues: - Fixed pstorage issue where different applications could write to the same page. Known issues: - The DFU over BLE example has been tested to work with a minimum connection interval of 11.25 ms. The application cannot handle connection intervals lower than 11.25 ms and may undergo a system reset in the middle of a firmware update. Workaround: If you face unexpected disconnects during the firmware update process, consider increasing the connection interval used by the master. - ANT: - NRFFOSDK-755: HRM TX buttons example may report wrong total elapsed time - BLE: - A few APIs of the Device Manager are not implemented. Also, documentation providing examples of how the API can be used is missing. - NRFFOSDK-2824: Device Manager (pstorage) does not support update of bond split across two pages. - Proprietary: - The nRF24Lxx ESB examples found in the legacy nRFready SDKs do not work out of the box with the nRF51 ESB examples. This is due to: - The legacy examples do not use "payload in ACK". - The legacy examples use RF channel 2 (not 10 as the nRF51 examples). - The examples do not use dynamic payload length. The legacy examples need to add the following to work with the nRF51 examples: hal_nrf_setup_dynamic_payload(0xFF); hal_nrf_enable_dynamic_payload(true); hal_nrf_enable_ack_payload(true); hal_nrf_set_rf_channel(10); In addition, the legacy PTX example must add code for handling the payloads received in ACK. - The Gazell Link Layer examples are not fully "out of the box" compatible with the legacy Gazell examples provided in the nRFgo SDK for nRF24Lxx devices. The timeslot periods and channel tables require adjustment. - Timeslot period: Edit the gzll_params.h file used in the nRF24Lxx projects or use the nrf_gzll_set_timeslot_period() function in the nRF51 projects (nRF51 Gazell timeslot period = 0.5*GZLL_RX_PERIOD). - Channel table: Edit the gzll_params.h file used in the nRF24Lxx projects or use the nrf_gzll_set_channel_table() function in the nRF51 projects. - Gazell does not support "Low Power Host mode" (Host mode 1). ======================================================================== nRF51 SDK v7.2.0 ---------------- Following toolchains/devices have been used for testing and verification: - ARM: MDK-ARM Version 5.12, 5.13 - GCC: gcc-arm-embedded 4.7 2013q1 - IAR: no support in this release - Windows XP SP3 32-bit - Windows 7 SP1 64-bit - Windows 8.1 Supported devices - This SDK is optimized for IC revision 3. For details, see the "nRF51 Series Compatibility Matrix" document (ATTN-51) available on www.nordicsemi.com. Note 1: To run the ANT examples, you must use an nRF51422 device. Note 2: Some of the examples using the SoftDevice will not fit on the 128 kB variant of the chip. Note 3: Some of the serialization examples are too big to be compiled using the free version of Keil. Supported SoftDevices: - S110 7.1.0 - S120 1.0.1 - S130 0.5.0-1.alpha - S210 4.0.1 - S310 2.0.1 Supported boards: - PCA10028 - PCA10031 - S110 connectivity support for Wavetek WT51822 For other devices and boards, see the SDK documentation, section "Using the SDK with other boards", or use SDK v6.x.x. Changes: - ANT: - ANT-FS client example: Added callback to allow applications to execute custom code while waiting for the burst to complete - Major rework on ANT DFU example - Added new ANT hub-2-hub/shared channel example - Added S310 target support for DTM example - BLE DFU is now supported for S310 Fixed issues: - ANT: - ANT-FS: Fixed bug with transfer sequence number error causing download failures - ANT-FS: Fixed bug where upon exhaustion of m_retry, the link time-out has been mistakenly disabled by a burst transfer - Fixed issue in linker script for S310 - Fixed memory corruption issue by using dedicated buffers for ANT and BLE stack events respectively on S310 - Fixed an issue where the ANT OTA Updater application v0.8 would not support hex files with code size larger than 65535 bytes Known issues: - SEGGER J-Link software has some issues with Keil. See http://www.segger.com/IDE_Integration_Keil.html#knownproblems for details. - Keil 5.13 may issue a warning about missing packs even when all Nordic Semiconductor packs are correctly installed. - The DFU over BLE example has been tested to work with a minimum connection interval of 11.25 ms. The application cannot handle connection intervals lower than 11.25 ms and may undergo a system reset in the middle of a firmware update. Workaround: If you face unexpected disconnects during the firmware update process, consider increasing the connection interval used by the master. - ANT: - NRFFOSDK-755: HRM TX buttons example may report wrong total elapsed time - BLE: - NRFFOSDK-3135: S120 examples: RAM is limited to 16 kB, because S120 V1.0.1 does not support utilizing the whole flash on the QFACAB chip - NRFFOSDK-119: Only the ble_app_proximity_low_power and ble_app_hrs applications are power optimized - S120 examples: Flash clear operation may fail when connected. Impact of this in the S120 examples is that if the peer loses the bond and a rebonding occurs, flash clear fails and a DM_EVT_DEVICE_CONTEXT_STORED event is notified with a failure. - A few APIs of the Device Manager are not implemented. Also, documentation providing examples of how the API can be used is missing. - NRFFOSDK-2824: Device Manager (pstorage) does not support update of bond split across two pages. - Proprietary: - Temperature example does not give sane output values. This is a hardware-related issue described in PAN_028 and will be fixed in future silicon. - The nRF24Lxx ESB examples found in the legacy nRFready SDKs do not work out of the box with the nRF51 ESB examples. This is due to: - The legacy examples do not use "payload in ACK". - The legacy examples use RF channel 2 (not 10 as the nRF51 examples). - The examples do not use dynamic payload length. The legacy examples need to add the following to work with the nRF51 examples: hal_nrf_setup_dynamic_payload(0xFF); hal_nrf_enable_dynamic_payload(true); hal_nrf_enable_ack_payload(true); hal_nrf_set_rf_channel(10); In addition, the legacy PTX example must add code for handling the payloads received in ACK. - The Gazell Link Layer examples are not fully "out of the box" compatible with the legacy Gazell examples provided in the nRFgo SDK for nRF24Lxx devices. The timeslot periods and channel tables require adjustment. - Timeslot period: Edit the gzll_params.h file used in the nRF24Lxx projects or use the nrf_gzll_set_timeslot_period() function in the nRF51 projects (nRF51 Gazell timeslot period = 0.5*GZLL_RX_PERIOD). - Channel table: Edit the gzll_params.h file used in the nRF24Lxx projects or use the nrf_gzll_set_channel_table() function in the nRF51 projects. - Gazell does not support "Low Power Host mode" (Host mode 1). ======================================================================== nRF51 SDK v7.1.0 ---------------- Following toolchains/devices have been used for testing and verification: - ARM: MDK-ARM Version 5.12 - GCC: gcc-arm-embedded 4.7 2013q1 - IAR: no support in this release - Windows XP SP3 32-bit - Windows 7 SP1 64-bit - Windows 8.1 Tested with devices: - nRF51422 QFACAB For others devices, use SDK 6.x.x. Supported SoftDevices: - S110 7.1.0 - S120 1.0.1 - S130 0.5.0-1.alpha - S210 4.0.1 - S310 2.0.0 Supported boards: - PCA10028 - PCA10031 - S110 connectivity support for Wavetek WT51822 For other boards, use SDK V6.x.x. Changes: - Experimental support for over-the-air firmware update using the ANT radio protocol - New experimental example ANT relay demo - Support for S310 ANT+BLE version 2.0.0 - Re-introduce Device Firmware Update via UART - BLE DFU single bank support for bootloader+softdevice update Fixed issues: - NRFFOSDK-3119 Fixed issue in app_timer where issuing start/stop from interrupt context caused long delays Known issues: - SEGGER J-Link software has some issues with Keil. See http://www.segger.com/IDE_Integration_Keil.html#knownproblems for more details. - The DFU over BLE example has been tested to work with a minimum connection interval of 11.25 ms. The application cannot handle connection intervals lower than 11.25 ms and may undergo a system reset in the middle of a firmware update. Workaround: If you face unexpected disconnects during the firmware update process, consider increasing the connection interval used by the master ANT - The OTA Updater application v.0.8 does not support hex files with code size larger than 65535 bytes. - NRFFOSDK-366: ANT-FS host: download sometimes fails when downloading a large file - NRFFOSDK-755: HRM TX buttons example may report wrong total elapsed time BLE - NRFFOSDK-3135: S120 examples: RAM is limited to 16 kB, because S120 V1.0.1 does not support utilizing the whole flash on the QFACAB chip - NRFFOSDK-119: Only the ble_app_proximity_low_power and ble_app_hrs applications are power optimized - S120 examples: Flash clear operation may fail when connected. Impact of this in the S120 examples is that if the peer loses the bond and a rebonding occurs, flash clear fails and a DM_EVT_DEVICE_CONTEXT_STORED event is notified with a failure. - A few APIs of the Device Manager are not implemented. Also, documentation providing examples of how the API can be used is missing. - NRFFOSDK-2824: Device Manager (pstorage) does not support update of bond split across two pages. Proprietary: - Temperature example does not give sane output values. This is a hardware-related issue described in PAN_028 and will be fixed in future silicon. - The nRF24Lxx ESB examples found in the legacy nRFready SDKs do not work out of the box with the nRF51 ESB examples. This is due to: - The legacy examples do not use "payload in ACK". - The legacy examples use RF channel 2 (not 10 as the nRF51 examples). - The examples do not use dynamic payload length. The legacy examples need to add the following to work with the nRF51 examples: hal_nrf_setup_dynamic_payload(0xFF); hal_nrf_enable_dynamic_payload(true); hal_nrf_enable_ack_payload(true); hal_nrf_set_rf_channel(10); In addition, the legacy PTX example must add code for handling the payloads received in ACK. - The Gazell Link Layer examples are not fully "out of the box" compatible with the legacy Gazell examples provided in the nRFgo SDK for nRF24Lxx devices. The timeslot periods and channel tables require adjustment. - Timeslot period: Edit the gzll_params.h file used in the nRF24Lxx projects or use the nrf_gzll_set_timeslot_period() function in the nRF51 projects (nRF51 Gazell timeslot period = 0.5*GZLL_RX_PERIOD). - Channel table: Edit the gzll_params.h file used in the nRF24Lxx projects or use the nrf_gzll_set_channel_table() function in the nRF51 projects. - Gazell does not support "Low Power Host mode" (Host mode 1). ======================================================================== nRF51 SDK v. 7.0.1 ------------------ This is a supplement to the nRF51 SDK v7.0.0 release notes. This release does not include any code changes compared to nRF51 SDK v7.0.0, except for a minor addition that is described in the "Changes" section. Fixed issues: - Replaced DeviceFamilyPack v1.1.3, which has a wrong URL, with DeviceFamilyPack v1.1.4. - Added a version field to Pack examples descriptions (NordicSemiconductor.nRF_Examples.pdsc). - Added missing Nordic Semiconductor nRF51 MDK installer to the repository distribution (nRF51_SDK_x.x.x_xxxxxxx.zip). - Added missing message sequence charts to the documentation. - Changed incorrect description of supported SoftDevices in the release notes (see below for the correct list of supported SoftDevices). Changes: - Added all the register and bitfields for the SPIM peripheral (present in the nRF51802 device) to the HAL header files and replaced the pack nRF_Drivers v1.0.0 with nRF_Drivers v1.1.0. Supported SoftDevices: - S110 7.1.0 - S120 1.0.1 - S130 0.5.0-1.alpha - S210 4.0.1 nRF51 SDK v7.0.0 ---------------- Following toolchains/devices have been used for testing and verification: - ARM: MDK-ARM Version 5.12 - GCC: gcc-arm-embedded 4.7 2013q1 - IAR: no support in this release - Windows XP SP3 32-bit - Windows 7 SP1 64-bit - Windows 8.1 Tested with devices: - nRF51422 QFACAB For others devices, use SDK 6.x.x. Supported SoftDevices: - S110 7.1.0 - S120 1.0.0 S120 1.0.1 - S130 0.5.0-1.alpha - S210 4.0.1 - S310 1.0.0 Supported boards: - PCA10028 - PCA10031 - S110 connectivity support for Wavetek WT51822 For other boards, use SDK V6.x.x. Changes: - New folder structure - Moved from installer to CMSIS pack format - Added support for PCA100028 and PCA10031 - Deprecated support for previous boards - Added support for RTX tickless ANT - Changed the ANT examples to support S210 SoftDevice v4.0.1 - Added experimental Background Scanning example ANT + BLE (Dual stack) - Removed support for S310 SoftDevice (for support, use SDK v6.x.x) BLE - DFU: Added experimental mechanism to exchange encryption keys between application and BootLoader - DFU: Added identification of firmware versions in the init packet - Added experimental BLE nRF UART example - Added experimental ANCS example - Added experimental example demonstrating usage of S130 SoftDevice - Added HRS example with RTX Proprietary - Deprecated the following examples (for support, use SDK v6.x.x): * ADNS2080 Mouse Sensor Driver Application * Cherry8x16 Keyboard Application * Button Debouncer Example * nRF6350 Radio Configuration Example * PWM Analyzer Example * Motor Control Example * TWI Master Example Fixed issues: - NRFFOSDK-362: Reset button won't work after programming without cycling the target power - NRFFOETT-205: The nRF51822 installer will not run if no C:\ drive exists - No installer - NRFFOSDK-236: When the bundled J-Link OB CDC driver installation dialog appears, the error message "Failed to install driver (Timeout occurred)" might appear - No installer - NRFFOSDK-363: Flashing software using SEGGER is NOT possible when the device is in SYSTEM_OFF mode Known issues: - SEGGER J-Link software has some issues with Keil. See http://www.segger.com/IDE_Integration_Keil.html#knownproblems for more details. - The DFU over BLE example has been tested to work with a minimum connection interval of 11.25 ms. The application cannot handle connection intervals lower than 11.25 ms and may undergo a system reset in the middle of a firmware update. Workaround: If you face unexpected disconnects during the firmware update process, consider increasing the connection interval used by the master ANT - NRFFOSDK-366: ANT-FS host: download sometimes fails when downloading a large file - NRFFOSDK-755: HRM TX buttons example may report wrong total elapsed time BLE - NRFFOSDK-3135: S120 examples: RAM is limited to 16 kB, because S120 V1.0.1 does not support utilizing the whole flash on the QFACAB chip - NRFFOSDK-119: Only the ble_app_proximity_low_power and ble_app_hrs applications are power optimized - S120 examples: Flash clear operation may fail when connected. Impact of this in the S120 examples is that if the peer loses the bond and a rebonding occurs, flash clear fails and a DM_EVT_DEVICE_CONTEXT_STORED event is notified with a failure. - A few APIs of the Device Manager are not implemented. Also, documentation providing examples of how the API can be used is missing. - NRFFOSDK-2824: Device Manager (pstorage) does not support update of bond split across two pages. Proprietary: - NRFFOSDK-1769: Not all examples have makefiles, nor have they been tested with the new toolchain. Expect minor compilation issues. - Temperature example does not give sane output values. This is a hardware-related issue described in PAN_028 and will be fixed in future silicon. - The nRF24Lxx ESB examples found in the legacy nRFready SDKs do not work out of the box with the nRF51 ESB examples. This is due to: - The legacy examples do not use "payload in ACK". - The legacy examples use RF channel 2 (not 10 as the nRF51 examples). - The examples do not use dynamic payload length. The legacy examples need to add the following to work with the nRF51 examples: hal_nrf_setup_dynamic_payload(0xFF); hal_nrf_enable_dynamic_payload(true); hal_nrf_enable_ack_payload(true); hal_nrf_set_rf_channel(10); In addition, the legacy PTX example must add code for handling the payloads received in ACK. - The Gazell Link Layer examples are not fully "out of the box" compatible with the legacy Gazell examples provided in the nRFgo SDK for nRF24Lxx devices. The timeslot periods and channel tables require adjustment. - Timeslot period: Edit the gzll_params.h file used in the nRF24Lxx projects or use the nrf_gzll_set_timeslot_period() function in the nRF51 projects (nRF51 Gazell timeslot period = 0.5*GZLL_RX_PERIOD). - Channel table: Edit the gzll_params.h file used in the nRF24Lxx projects or use the nrf_gzll_set_channel_table() function in the nRF51 projects. - Gazell does not support "Low Power Host mode" (Host mode 1). ======================================================================== nRF51 SDK v. 6.1.0 ------------------ Following toolchains/devices have been used for testing and verification: - ARM: MDK-ARM Version 5.10.x/5.11.x - GCC: gcc-arm-embedded 4.7 2013q1 - IAR: Embedded Workbench for ARM 6.60 - Windows XP SP3 32 bit - Windows 7 SP1 64 bit - Windows 8.0/8.1 Tested with devices: - nRF51822 QFAAG0 - nRF51822 QFAAGC - nRF51822 QFAAFA - nRF51422 QFAAE0 For others devices, use SDK 4.x.x Supported SoftDevices: - S110 7.0.0 - S120 1.0.0 - S210 3.0.0 - S310 1.0.0 Supported boards: - PCA10000 v1.0 (Only for use with Master Emulator) - PCA10000 v2.1.0 and 2.2.0 - PCA10001 v2.1.0 and 2.2.0 - PCA10004 v2.1.0 - PCA10005 v2.1.0 and 2.2.0 - PCA10003 v3.0.0 Changes: - Added Keil 5 uvprojx files for most example projects. - Extended GCC support, most examples now supplied with Makefiles. ANT - None. ANT + BLE (Dual stack) - None. BLE - Device firmware upgrade with support for OTA update of SoftDevice, app and bootloader is no longer in experimental status. - Buttonless bootloader mode, enter bootloader mode via over-the-air command (see ble_app_hrs example, using ble_app_hrs_dfu.uvproj project). - Device manager (BLE bond handling) for S110 and S120 are no longer in experimental status. - db_discovery module (for GATT database discovery) for S120 is no longer in experimental status. - New reliable transport layer for S110 SoftDevice serialization. - Example ble_app_hrs_c (heart rate collector) for S120 is no longer in experimental status. - Example ble_app_multilink_central for S120 is no longer in experimental status. - Example ble_app_multilink_peripheral for S110 is no longer in experimental status. - Experimental examples ble_app_ancs and ble_app_multiactivity have been deprecated from this release. - Experimental example ble_app_uart for pca10001 has been deprecated from this release. Proprietary - None. Fixed issues: - NRFFOSDK-2884: Fixed issue in app_button module (function app_button_is_pushed). - NRFFOSDK-1341: Added missing characteristic in Blood Glucose application. - NRFFOSDK-2859: Removed redundant code in Blood Glucose application. - NRFFOSDK-2557: Fixed some doxygen documentation errors. Known issues: - When flashing from Keil 4, a pop-up might appear stating "Cannot Load Flash Device Description !". Solution: - Write new flash algorithm settings to the uvopt file. Press ALT+F7 to open "Options for Target" dialog. Select "Options for Target" -> "Utilities". Press "Settings" button to see flashing algorithms. Verify that "nRF51xxx" is in the list of flashing algorithms, if not add it by pressing the "Add" button. Exit and save settings by pressing "OK". This is also important to do if you did find the "nRF51xxx" in the list of flashing algorithms. - If you have an existing KEIL project target set to use device variant "nRF51", a pop-up might appear stating that you have to "update your device selection". Solution: Press ALT+F7 to open "Options for Target" dialog. Select "Options for Target" -> "Device". Choose "Nordic nRF51 Series Devices" from the Database list. Select the variant of the nRF51 chip that is used for the KEIL project target. - When using J-Link software prior to version 4.66, a warning might appear when entering "Options for Target" -> "Debug" -> "Settings". The warning indicates that the device is unknown to the specific version of the J-Link software. Solution: Upgrade J-Link software to version 4.66 or later. - Segger J-Link software has some issues with Keil. See http://www.segger.com/IDE_Integration_Keil.html#knownproblems for more details. - On some Windows XP machines, J-Link CDC installer fails producing an error message saying it could not find JLinkCDCDriver_x86.msi. Solution: Try running the installer C:\Program Files\SEGGER\JLinkARM_V\USBDriver\JLinkCDCInstaller_V1.2b.exe manually. - NRFFOETT-205 - The nRF51822 installer will not run if no C:\ drive exists - NRFFOSDK-236 - When the bundled J-Link OB CDC driver installation dialog appears, the error message "Failed to install driver (Timeout occurred)" might appear . Ignore it. - NRFFOSDK-362 - Reset button won't work after programming without cycling the target power. - NRFFOSDK-363 - Flashing software using SEGGER is NOT possible when the device is in SYSTEM_OFF mode Solution: Wake-up the current application from SYSTEM_OFF before flashing a new application. - The DFU over BLE example has been tested to work with a minimum connection interval of 11.25 ms. This application will not be able to handle connection intervals lower than 11.25 ms and may undergo a system reset in the middle of a firmware update. Workaround: If you face unexpected disconnects during firmware update process, consider increasing the connection interval used by the master. ANT - NRFFOSDK-366 - ANT-FS host: download sometimes fails when downloading a large file. - NRFFOSDK-755 - HRM TX buttons example may report wrong total elapsed time. BLE - NRFFOSDK-119 - Only the "....\sdk\nrf5822\Board\nrf6310\ble\ble_app_pwr_profiling\","....\sdk\nrf5822\Board\pca10001\ble\ble_app_proximity\ ", and "....\sdk\nrf5822\Board\pca10001\ble\ble_app_hrs\ " applications are power optimized. - S120 Examples: Flash clear operation may fail when connected. Impact of this in the S120 examples is that if peer loses the bond and a re-bonding occurs, flash clear fails, and DM_EVT_DEVICE_CONTEXT_STORED event is notified with a failure. - Device manager has a few APIs unimplemented. Also documentation providing examples of how API can be used is missing. - NRFFOSDK-2824: Device manager (pstorage) doesn't support update of bond split across two pages. Proprietary: - NRFFOSDK-1769: Not all examples have makefiles, nor have they been tested with the new toolchain. Expect minor compilation issues. - Using Keil versions 4.53 and older will not work unless you change configuration in jlinksettings.ini. See User Guide for more details. - Temperature example does not give sane output values. This is hardware related issue described in PAN_028 and will be fixed in future silicon. - The nRF24Lxx ESB examples found in the legacy nRFready SDKs do not work out of the box with the nRF51 ESB examples. This is due to: - The legacy examples do not use "payload in ACK". - The legacy examples use RF channel 2 (not 10 as the nRF51 examples). - The examples do not use dynamic payload length. The legacy examples need to add the following in order to work with the nRF51 examples: hal_nrf_setup_dynamic_payload(0xFF); hal_nrf_enable_dynamic_payload(true); hal_nrf_enable_ack_payload(true); hal_nrf_set_rf_channel(10); In addition, the legacy PTX example must add code for handling the payloads received in ACK. - The Gazell Link Layer examples are not fully "out of the box" compatible with the legacy Gazell examples provided in the nRFgo SDK for nRF24Lxx devices. The timeslot periods and channel tables require adjustment. - Timeslot period: Edit gzll_params.h file used in the nRF24Lxx projects, or use the nrf_gzll_set_timeslot_period() function in the nRF51 projects (nRF51 Gazell timeslot period = 0.5*GZLL_RX_PERIOD). - Channel table: Edit gzll_params.h file used in the nRF24Lxx projects, or use the nrf_gzll_set_channel_table() function in the nRF51 projects. - Gazell does not support "Low Power Host mode" (Host mode 1). ======================================================================== nRF51 SDK v. 6.0.0 ------------------ Following toolchains/devices have been used for testing and verification: - ARM: MDK-ARM Version 5.10.x/5.11.x - GCC: gcc-arm-embedded 4.7 2013q1 - IAR: Embedded Workbench for ARM 6.60 - Windows XP SP3 32 bit - Windows 7 SP1 64 bit - Windows 8.0/8.1 Tested with devices: - nRF51822 QFAAG0 - nRF51822 QFAAGC - nRF51822 QFAAFA - nRF51422 QFAAE0 For others devices, use SDK 4.x.x Supported SoftDevices: - S110 7.0.0 - S120 1.0.0 - S210 3.0.0 - S310 1.0.0 Supported boards: - PCA10000 v1.0 (Only for use with Master Emulator) - PCA10000 v2.1.0 and 2.2.0 - PCA10001 v2.1.0 and 2.2.0 - PCA10004 v2.1.0 - PCA10005 v2.1.0 and 2.2.0 - PCA10003 v3.0.0 Changes: - Added partial support for Keil 5 uvprojx files. ANT - None ANT + BLE (Dual stack) BLE - New module device manager replaces bond manager for storing persistent data - Experimental device manager support for s120 (BLE central) - S110 serialization solution has been reworked - 100% s110 BLE APIs are now serialized - S110 support for application concurrent multiprotocol radio access - Pstorage module: Added API for doing range updates - Experimental: Device firmware upgrade now supports updating both SoftDevice and bootloader for s110 Proprietary - Enhanced ShockBurst: Added nrf_esb_reuse_pid() function to API, giving "reuse payload" functionality. - Gazell: Added "suspend" mode enabling sharing of radio and PPI. - Gazell: HW resources are released when Gazell is being disabled or entering suspend mode. - Gazell: HW resources are reconfigured when Gazell is being enabled or exiting from suspend mode. Fixed issues: - NRFFOSDK-2542 - SoftDevice related documentation for S110, S120 and S310 BLE stack is not consistent. When looking up SoftDevice application interface or message sequence charts, it is possible that one is looking at incorrect interface. Recommendation hence is to look at SoftDevice headers to ensure correct appplication interface. This is also applicable for Serialization library references. This will be fixed in next release. - SDK documentation has been splitted into 4 seperate documents with a common index page. ANT - None ANT + BLE (Dual stack) - S310 Heart Rate Relay Example: Bonding does not always function as expected. If bonding is enabled using compiler flag it is recommended to perform service discovery before bonding to minimize chances of unexpected behaviour. BLE Proprietary - Enhanced ShockBurst/Gazell: Received packets in Host/PRX mode with CRC error can no longer return ACK to device. - NRFFOSDK-2470: app_timer - Fixed issue where starting and stopping the timer repeatedly caused errors in the module Known issues: - When flashing from Keil 4, a pop-up might appear stating "Cannot Load Flash Device Description !". Solution: - Write new flash algorithm settings to the uvopt file. Press ALT+F7 to open "Options for Target" dialog. Select "Options for Target" -> "Utilities". Press "Settings" button to see flashing algorithms. Verify that "nRF51xxx" is in the list of flashing algorithms, if not add it by pressing the "Add" button. Exit and save settings by pressing "OK". This is also important to do if you did find the "nRF51xxx" in the list of flashing algorithms. - If you have an existing KEIL project target set to use device variant "nRF51", a pop-up might appear stating that you have to "update your device selection". Solution: Press ALT+F7 to open "Options for Target" dialog. Select "Options for Target" -> "Device". Choose "Nordic nRF51 Series Devices" from the Database list. Select the variant of the nRF51 chip that is used for the KEIL project target. - When using J-Link software prior to version 4.66, a warning might appear when entering "Options for Target" -> "Debug" -> "Settings". The warning indicates that the device is unknown to the specific version of the J-Link software. Solution: Upgrade J-Link software to version 4.66 or later. - Segger J-Link software has some issues with Keil. See http://www.segger.com/IDE_Integration_Keil.html#knownproblems for more details. - On some Windows XP machines, J-Link CDC installer fails producing an error message saying it could not find JLinkCDCDriver_x86.msi. Solution: Try running the installer C:\Program Files\SEGGER\JLinkARM_V\USBDriver\JLinkCDCInstaller_V1.2b.exe manually. - NRFFOETT-205 - The nRF51822 installer will not run if no C:\ drive exists - NRFFOSDK-236 - When the bundled J-Link OB CDC driver installation dialog appears, the error message "Failed to install driver (Timeout occurred)" might appear . Ignore it. - NRFFOSDK-362 - Reset button won't work after programming without cycling the target power. - NRFFOSDK-363 - Flashing software using SEGGER is NOT possible when the device is in SYSTEM_OFF mode Solution: Wake-up the current application from SYSTEM_OFF before flashing a new application. - The DFU over BLE example has been tested to work with a minimum connection interval of 11.25 ms. This application will not be able to handle connection intervals lower than 11.25 ms and may undergo a system reset in the middle of a firmware update. Workaround: If you face unexpected disconnects during firmware update process, consider increasing the connection interval used by the master. ANT - NRFFOSDK-366 - ANT-FS host: download sometimes fails when downloading a large file. - NRFFOSDK-755 - HRM TX buttons example may report wrong total elapsed time. BLE - NRFFOSDK-119 - Only the "....\sdk\nrf5822\Board\nrf6310\ble\ble_app_pwr_profiling\","....\sdk\nrf5822\Board\pca10001\ble\ble_app_proximity\ ", and "....\sdk\nrf5822\Board\pca10001\ble\ble_app_hrs\ " applications are power optimized. - S120 Examples: Flash clear operation may fail when connected. Impact of this in the S120 examples is that if peer loses the bond and a re-bonding occurs, flash clear fails, and DM_EVT_DEVICE_CONTEXT_STORED event is notified with a failure. - Device manager has a few APIs unimplemented. Also documentation providing examples of how API can be used is missing. - NRFFOSDK-2824: Device manager (pstorage) doesn't support update of bond split across two pages. Proprietary: - NRFFOSDK-1769: Not all examples have makefiles, nor have they been tested with the new toolchain. Expect minor compilation issues. - Using Keil versions 4.53 and older will not work unless you change configuration in jlinksettings.ini. See User Guide for more details. - Temperature example does not give sane output values. This is hardware related issue described in PAN_028 and will be fixed in future silicon. - The nRF24Lxx ESB examples found in the legacy nRFready SDKs do not work out of the box with the nRF51 ESB examples. This is due to: - The legacy examples do not use "payload in ACK". - The legacy examples use RF channel 2 (not 10 as the nRF51 examples). - The examples do not use dynamic payload length. The legacy examples need to add the following in order to work with the nRF51 examples: hal_nrf_setup_dynamic_payload(0xFF); hal_nrf_enable_dynamic_payload(true); hal_nrf_enable_ack_payload(true); hal_nrf_set_rf_channel(10); In addition, the legacy PTX example must add code for handling the payloads received in ACK. - The Gazell Link Layer examples are not fully "out of the box" compatible with the legacy Gazell examples provided in the nRFgo SDK for nRF24Lxx devices. The timeslot periods and channel tables require adjustment. - Timeslot period: Edit gzll_params.h file used in the nRF24Lxx projects, or use the nrf_gzll_set_timeslot_period() function in the nRF51 projects (nRF51 Gazell timeslot period = 0.5*GZLL_RX_PERIOD). - Channel table: Edit gzll_params.h file used in the nRF24Lxx projects, or use the nrf_gzll_set_channel_table() function in the nRF51 projects. - Gazell does not support "Low Power Host mode" (Host mode 1). ======================================================================== nRF51 SDK v. 5.2.0 ------------------ Following toolchains/devices have been used for testing and verification: - ARM: MDK-ARM Version 5.10.x - GCC: gcc-arm-embedded 4.7 2013q1 - IAR: Embedded Workbench for ARM 6.60 - Windows XP SP3 32 bit - Windows 7 SP1 64 bit - Windows 8.0/8.1 - The BLE example applications for HID Keyboard and HID Mouse have been tested with HID host running on Windows 8.1. Tested with devices: - nRF51822 QFAAG0 - nRF51822 QFAAGC - nRF51822 QFAAFA - nRF51422 QFAAE0 For others devices, use SDK 4.x.x Supported SoftDevices: - S110 6.0.0 - S120 1.0.0-1.alpha - S210 3.0.0 - S310 1.0.0 Supported boards: - PCA10000 v1.0 (Only for use with Master Emulator) - PCA10000 v2.1.0 and 2.2.0 - PCA10001 v2.1.0 and 2.2.0 - PCA10004 v2.1.0 - PCA10005 v2.1.0 and 2.2.0 - PCA10003 v3.0.0 Changes: - app_button module: Detect both push and release, instead of just push - Persistent storage (pstorage) module: - Support for writing to used memory regions with the new update API. - Support for clearing single blocks. - Added get_status API to identify pending flash operations. ANT - None ANT + BLE (Dual stack) - Support for s310 SoftDevice added. - Heart rate monitor example project support added. - Added Device Firmware Update (DFU) example for s310. BLE - New experimental device manager module for managing bonds on s120. - Beacon example added. It is available at nrf51822\Board\nrf6310\s110\ble_app_beacon and nrf51822\Board\pca10001\s110\ble_app_beacon. - Multiple GATT clients: The Database Discovery module available in nrf51822\Board\nrf6310\s120\experimental\common folder can now be used to discover two GATT services at the peer. - Serialized s110 advertisement example has been removed. - HID Keyboard application modified to send upper case letters on pressing Button 2. Proprietary - None Fixed issues: ANT - None ANT + BLE (Dual stack) - None BLE - NRFFOSDK-1897: Glucose: Fixed bug where authentication was not initiated when connecting to already bonded master. - NRFFOSDK-2318: Glucose Feature values had incorrect values for 'General Device Fault Supported', 'Time fault Supported', and 'Multiple Bond Supported'. This has been fixed. - ANCS: The advertising interval of the Apple Notification Center Client example application is reduced to 25 ms. Previously it was 250 ms which made it hard to discover from the peer device. - NRFFOSDK-2357: Blood Pressure application changed to check if indication is enabled before attempting to send an indication to the peer - NRFFOSDK-2336: HID Keyboard application fixed to send the correct Input Report bytes when in Boot Mode. - Fixed issue in bond manager related to clearing of whitelist on deleting all bonds. - NRFFOSDK-2162: New pstorage get_status API used to allow for flash access to be completed before system off. Proprietary - NRFFOETT-644 - Gazell / ESB: Fixed some documentation issues. Known issues: - NRFFOSDK-2542 - SoftDevice related documentation for S110, S120 and S310 BLE stack is not consistent. When looking up SoftDevice application interface or message sequence charts, it is possible that one is looking at incorrect interface. Recommendation hence is to look at SoftDevice headers to ensure correct appplication interface. This is also applicable for Serialization library references. This will be fixed in next release. - When flashing from Keil 4, a pop-up might appear stating "Cannot Load Flash Device Description !". Solution: - Write new flash algorithm settings to the uvopt file. Press ALT+F7 to open "Options for Target" dialog. Select "Options for Target" -> "Utilities". Press "Settings" button to see flashing algorithms. Verify that "nRF51xxx" is in the list of flashing algorithms, if not add it by pressing the "Add" button. Exit and save settings by pressing "OK". This is also important to do if you did find the "nRF51xxx" in the list of flashing algorithms. - If you have an existing KEIL project target set to use device variant "nRF51", a pop-up might appear stating that you have to "update your device selection". Solution: Press ALT+F7 to open "Options for Target" dialog. Select "Options for Target" -> "Device". Choose "Nordic nRF51 Series Devices" from the Database list. Select the variant of the nRF51 chip that is used for the KEIL project target. - When using J-Link software prior to version 4.66, a warning might appear when entering "Options for Target" -> "Debug" -> "Settings". The warning indicates that the device is unknown to the specific version of the J-Link software. Solution: Upgrade J-Link software to version 4.66 or later. - Segger J-Link software has some issues with Keil. See http://www.segger.com/IDE_Integration_Keil.html#knownproblems for more details. - On some Windows XP machines, J-Link CDC installer fails producing an error message saying it could not find JLinkCDCDriver_x86.msi. Solution: Try running the installer C:\Program Files\SEGGER\JLinkARM_V\USBDriver\JLinkCDCInstaller_V1.2b.exe manually. - NRFFOETT-205 - The nRF51822 installer will not run if no C:\ drive exists - NRFFOSDK-236 - When the bundled J-Link OB CDC driver installation dialog appears, the error message "Failed to install driver (Timeout occurred)" might appear . Ignore it. - NRFFOSDK-362 - Reset button won't work after programming without cycling the target power. - NRFFOSDK-363 - Flashing software using SEGGER is NOT possible when the device is in SYSTEM_OFF mode Solution: Wake-up the current application from SYSTEM_OFF before flashing a new application. - The DFU over BLE example has been tested to work with a minimum connection interval of 11.25 ms. This application will not be able to handle connection intervals lower than 11.25 ms and may undergo a system reset in the middle of a firware update. Workaround: If you face unexpected disconnects during firmware update process, consider increasing the connection interval used by the master. ANT - NRFFOSDK-366 - ANT-FS host: download sometimes fails when downloading a large file. - NRFFOSDK-755 - HRM TX buttons example may report wrong total elapsed time. ANT + BLE (Dual stack) - S310 Heart Rate Relay Example: Bonding does not always function as expected. If bonding is enabled using compiler flag it is recommended to perform service discovery before bonding to minimize chances of unexpected behavior. BLE - NRFFOSDK-119 - Only the "....\sdk\nrf5822\Board\nrf6310\ble\ble_app_pwr_profiling\","....\sdk\nrf5822\Board\pca10001\ble\ble_app_proximity\ ", and "....\sdk\nrf5822\Board\pca10001\ble\ble_app_hrs\ " applications are power optimized. - NRFFOSDK-472 - Bonding information in flash are not erased during programming of a new application. (If the bonding information is not erased manually - by pressing button 1 during start-up - the new application might assert. ) - S120 Examples: Flash clear operation may fail when connected. Impact of this in the S120 examples is that if peer loses the bond and a re-bonding occurs, flash clear fails, and DM_EVT_DEVICE_CONTEXT_STORED event is notified with a failure. - Device manager is an experimental module and has a few APIs unimplemented. Also documentation providing examples of how API can be used is missing. Proprietary: - NRFFOSDK-1769: Not all examples have makefiles, nor have they been tested with the new toolchain. Expect minor compilation issues. - Using Keil versions 4.53 and older will not work unless you change configuration in jlinksettings.ini. See User Guide for more details. - Temperature example does not give sane output values. This is hardware related issue described in PAN_028 and will be fixed in future silicon. - The nRF24Lxx ESB examples found in the legacy nRFready SDKs do not work out of the box with the nRF51 ESB examples. This is due to: - The legacy examples do not use "payload in ACK". - The legacy examples use RF channel 2 (not 10 as the nRF51 examples). - The examples do not use dynamic payload length. The legacy examples need to add the following in order to work with the nRF51 examples: hal_nrf_setup_dynamic_payload(0xFF); hal_nrf_enable_dynamic_payload(true); hal_nrf_enable_ack_payload(true); hal_nrf_set_rf_channel(10); In addition, the legacy PTX example must add code for handling the payloads received in ACK. - The Gazell Link Layer examples are not fully "out of the box" compatible with the legacy Gazell examples provided in the nRFgo SDK for nRF24Lxx devices. The timeslot periods and channel tables require adjustment. - Timeslot period: Edit gzll_params.h file used in the nRF24Lxx projects, or use the nrf_gzll_set_timeslot_period() function in the nRF51 projects (nRF51 Gazell timeslot period = 0.5*GZLL_RX_PERIOD). - Channel table: Edit gzll_params.h file used in the nRF24Lxx projects, or use the nrf_gzll_set_channel_table() function in the nRF51 projects. - Gazell does not support "Low Power Host mode" (Host mode 1). ======================================================================== nRF51 SDK v. 5.1.0 ------------------ Following toolchains/devices have been used for testing and verification: - ARM: MDK-ARM Version 5.0.5.x - GCC: gcc-arm-embedded 4.7 2013q1 - IAR: Embedded Workbench for ARM 6.60 - Windows XP SP3 32 bit - Windows 7 SP1 64 bit - Windows 8.0/8.1 - The BLE example applications for HID Keyboard and HID Mouse have been tested with HID host running on Windows 8.1. Tested with devices: - nRF51822 QFAAGC (For others, use SDK 4.x.x) - nRF51822 QFAAFA (For others, use SDK 4.x.x) - nRF51422 QFAADA (For others, use SDK 4.x.x) Supported SoftDevices: - S110 6.0.0 - S120 0.8.0-2.alpha - S210 3.0.0-3.beta - S310 1.0.0-2.alpha Supported boards: - PCA10000 v1.0 (Only for use with Master Emulator) - PCA10000 v2.1.0 and 2.2.0 - PCA10001 v2.1.0 and 2.2.0 - PCA10004 v2.1.0 - PCA10005 v2.1.0 and 2.2.0 Changes: - Moved and renamed SoftDevice header folders: from nrf51822/Include/ble/softdevice to nrf51822/Include/s110 from nrf51422/Include/ble/softdevice to nrf51422/Include/s210 - Added SoftDevice headers for s120 and s310 at: nrf51822/Include/s120 nrf51422/Include/s310 - Moved ANT examples from nrf51422/Board//ant to nrf51422/Board//s210 - Moved s110 SoftDevice examples from nrf51822/Board//ble to nrf51822/Board//s110 - Added folder for s310 examples in nrf51422/Board//s310 - Added folder for s120 SoftDevice examples in nrf51822/Board//s120 ANT - The flash layout settings of all ANT examples have been adapted to suit the new flash layout of S210 SoftDevice. BLE - Added experimental Multilink (up to 8) Central example which uses s120 SoftDevice. - Added experimental Heart Rate collector example which uses s120 SoftDevice. - Added prototype iBeacon example. Proprietary Fixed issues: - NRFFOETT-671: Added support for creating new nRF51 projects in Keil 5. ANT - NRFFOETT-438: The API documentation of S210 SoftDevice is now correctly structured in the SDK documentation. BLE Proprietary Known issues: - When flashing from Keil 4, a pop-up might appear stating "Cannot Load Flash Device Description !". Solution: - Write new flash algorithm settings to the uvopt file. Press ALT+F7 to open "Options for Target" dialog. Select "Options for Target" -> "Utilities". Press "Settings" button to see flashing algorithms. Verify that "nRF51xxx" is in the list of flashing algorithms, if not add it by pressing the "Add" button. Exit and save settings by pressing "OK". This is also important to do if you did find the "nRF51xxx" in the list of flashing algorithms. - If you have an existing KEIL project target set to use device variant "nRF51", a pop-up might appear stating that you have to "update your device selection". Solution: Press ALT+F7 to open "Options for Target" dialog. Select "Options for Target" -> "Device". Choose "Nordic nRF51 Series Devices" from the Database list. Select the variant of the nRF51 chip that is used for the KEIL project target. - When using J-Link software prior to version 4.66, a warning might appear when entering "Options for Target" -> "Debug" -> "Settings". The warning indicates that the device is unknown to the specific version of the J-Link software. Solution: Upgrade J-Link software to version 4.66 or later. - Segger J-Link software has some issues with Keil. See http://www.segger.com/IDE_Integration_Keil.html#knownproblems for more details. - On some Windows XP machines, J-Link CDC installer fails producing an error message saying it could not find JLinkCDCDriver_x86.msi. Solution: Try running the installer C:\Program Files\SEGGER\JLinkARM_V\USBDriver\JLinkCDCInstaller_V1.2b.exe manually. - NRFFOETT-205 - The nRF51822 installer will not run if no C:\ drive exists - NRFFOSDK-236 - When the bundled J-Link OB CDC driver installation dialog appears, the error message "Failed to install driver (Timeout occurred)" might appear . Ignore it. - NRFFOSDK-362 - Reset button won't work after programming without cycling the target power. - NRFFOSDK-363 - Flashing software using SEGGER is NOT possible when the device is in SYSTEM_OFF mode Solution: Wake-up the current application from SYSTEM_OFF before flashing a new application. - The DFU over BLE example has been tested to work with a minimum connection interval of 11.25 ms. This application will not be able to handle connection intervals lower than 11.25 ms and may undergo a system reset in the middle of a firware update. Workaround: If you face unexpected disconnects during firmware update process, consider increasing the connection interval used by the master. ANT - NRFFOSDK-366 - ANT-FS host: download sometimes fails when downloading a large file. - NRFFOSDK-755 - HRM TX buttons example may report wrong total elapsed time. BLE - NRFFOSDK-119 - Only the "....\sdk\nrf5822\Board\nrf6310\ble\ble_app_pwr_profiling\","....\sdk\nrf5822\Board\pca10001\ble\ble_app_proximity\ ", and "....\sdk\nrf5822\Board\pca10001\ble\ble_app_hrs\ " applications are power optimized. - NRFFOSDK-472 - Bonding information in flash are not erased during programming of a new application. (If the bonding information is not erased manually - by pressing button 1 during start-up - the new application might assert. ) - NRFFOSDK-2162 - Heart Rate application for PCA10001 possible inconsistent system attributes on power cycle. It is possible that the system attributes on power cycle are not consistent with the ones updated during previous connection. Proprietary: - NRFFOSDK-1769: Not all examples have makefiles, nor have they been tested with the new toolchain. Expect minor compilation issues. - Using Keil versions 4.53 and older will not work unless you change configuration in jlinksettings.ini. See User Guide for more details. - Temperature example does not give sane output values. This is hardware related issue described in PAN_028 and will be fixed in future silicon. - The nRF24Lxx ESB examples found in the legacy nRFready SDKs do not work out of the box with the nRF51 ESB examples. This is due to: - The legacy examples do not use "payload in ACK". - The legacy examples use RF channel 2 (not 10 as the nRF51 examples). - The examples do not use dynamic payload length. The legacy examples need to add the following in order to work with the nRF51 examples: hal_nrf_setup_dynamic_payload(0xFF); hal_nrf_enable_dynamic_payload(true); hal_nrf_enable_ack_payload(true); hal_nrf_set_rf_channel(10); In addition, the legacy PTX example must add code for handling the payloads received in ACK. - The Gazell Link Layer examples are not fully "out of the box" compatible with the legacy Gazell examples provided in the nRFgo SDK for nRF24Lxx devices. The timeslot periods and channel tables require adjustment. - Timeslot period: Edit gzll_params.h file used in the nRF24Lxx projects, or use the nrf_gzll_set_timeslot_period() function in the nRF51 projects (nRF51 Gazell timeslot period = 0.5*GZLL_RX_PERIOD). - Channel table: Edit gzll_params.h file used in the nRF24Lxx projects, or use the nrf_gzll_set_channel_table() function in the nRF51 projects. - Gazell does not support "Low Power Host mode" (Host mode 1). ======================================================================== nRF51 SDK v. 5.0.0 ------------------ Following toolchains/devices have been used for testing and verification: - ARM: MDK-ARM Version 4.72.1.0 - GCC: gcc-arm-embedded 4.7 2013q1 - IAR: embedded workbench for ARM 6.60 - Windows XP SP3 32 bit - Windows 7 SP1 64 bit - Windows 8.0/8.1 - The BLE example applications for HID Keyboard and HID Mouse have been tested with HID host running on Windows 8.1. Tested with devices: - nRF51822 QFAAGC (For others, use SDK 4.x.x) - nRF51822 QFAAFA (For others, use SDK 4.x.x) - nRF51422 QFAADA (For others, use SDK 4.x.x) Supported SoftDevices: - S110 6.0.0-3 Beta - Expected to be Compatible with SoftDevice S110 V6.0.0 production version Supported boards: - PCA10000 v1.0 (Only for use with Master Emulator) - PCA10000 v2.1.0 and 2.2.0 - PCA10001 v2.1.0 and 2.2.0 - PCA10004 v2.1.0 - PCA10005 v2.1.0 NOTE: The ANT examples in this release will only work on nRF51422 QFAADA engineering samples. Currently no official boards/kits exist that work with these examples. Changes: - Added pstorage module for handling asynchronous non-volatile memory (flash) access via SoftDevice API - Existing BLE event handler has been extended into the new SoftDevice handler module. The new SoftDevice handler module allows for fetching SoC, BLE and ANT events - Restructured documentation ANT BLE - Changes for support of S110 V6.0.0-3 Beta - Added Apple Notification Center in experimental Proprietary - SPI slave driver and example code added - Include new ESB library which uses the same peripherals as the S110 SoftDevice Fixed issues: ANT BLE Proprietary Known issues: - Creating a blank project with Keil V5.0 it is not possible to choose the nRF51 series. Solution: Start new projects by making a copy of any existing keil project from the SDK - If you have an existing KEIL project target set to use device variant "nRF51", a pop-up might appear stating that you have to "update your device selection". Solution: Press ALT+F7 to open "Options for Target" dialog. Select "Options for Target" -> "Device". Choose "Nordic nRF51 Series Devices" from the Database list. Select the variant of the nRF51 chip that is used for the KEIL project target. - When using J-Link software prior to version 4.66, a warning might appear when entering "Options for Target" -> "Debug" -> "Settings". The warning indicates that the device is unknown to the specific version of the J-Link software. Solution: Upgrade J-Link software to version 4.66 or later. - Segger J-Link software has some issues with Keil. See http://www.segger.com/IDE_Integration_Keil.html#knownproblems for more details. - On some Windows XP machines, J-Link CDC installer fails producing an error message saying it could not find JLinkCDCDriver_x86.msi. Solution: Try running the installer C:\Program Files\SEGGER\JLinkARM_V\USBDriver\JLinkCDCInstaller_V1.2b.exe manually. - NRFFOETT-205 - The nRF51822 installer will not run if no C:\ drive exists - NRFFOSDK-236 - When the bundled J-Link OB CDC driver installation dialog appears, the error message "Failed to install driver (Timeout occurred)" might appear . Ignore it. - NRFFOSDK-362 - Reset button won't work after programming without cycling the target power. - NRFFOSDK-363 - Flashing software using SEGGER is NOT possible when the device is in SYSTEM_OFF mode Solution: Wake-up the current application from SYSTEM_OFF before flashing a new application. - The DFU over BLE example has been tested to work with a minimum connection interval of 11.25 ms. This application will not be able to handle connection intervals lower than 11.25 ms and may undergo a system reset in the middle of a firware update. Workaround: If you face unexpected disconnects during firmware update process, consider increasing the connection interval used by the master. ANT - NRFFOETT-438 - Documentation on S210 SoftDevice API wrongly structured. All SoftDevice functions appear as SVCALL in the Doxygen page. - NRFFOSDK-366 - ANT-FS host: download sometimes fails when downloading a large file. - NRFFOSDK-755 - HRM TX buttons example may report wrong total elapsed time. BLE - NRFFOSDK-119 - Only the "....\sdk\nrf5822\Board\nrf6310\ble\ble_app_pwr_profiling\","....\sdk\nrf5822\Board\pca10001\ble\ble_app_proximity\ ", and "....\sdk\nrf5822\Board\pca10001\ble\ble_app_hrs\ " applications are power optimized. - NRFFOSDK-472 - Bonding information in flash are not erased during programming of a new application. (If the bonding information is not erased manually - by pressing button 1 during start-up - the new application might assert. ) - NRFFOSDK-2162 - Heart Rate application for PCA10001 possible inconsistent system attributes on power cycle. It is possible that the system attributes on power cycle are not consistent with the ones updated during previous connection. Proprietary: - NRFFOSDK-1769: Not all examples have makefiles, nor have they been tested with the new toolchain. Expect minor compilation issues. - Using Keil versions 4.53 and older will not work unless you change configuration in jlinksettings.ini. See User Guide for more details. - Temperature example does not give sane output values. This is hardware related issue described in PAN_028 and will be fixed in future silicon. - The nRF24Lxx ESB examples found in the legacy nRFready SDKs do not work out of the box with the nRF51 ESB examples. This is due to: - The legacy examples do not use "payload in ACK". - The legacy examples use RF channel 2 (not 10 as the nRF51 examples). - The examples do not use dynamic payload length. The legacy examples need to add the following in order to work with the nRF51 examples: hal_nrf_setup_dynamic_payload(0xFF); hal_nrf_enable_dynamic_payload(true); hal_nrf_enable_ack_payload(true); hal_nrf_set_rf_channel(10); In addition, the legacy PTX example must add code for handling the payloads received in ACK. - The Gazell Link Layer examples are not fully "out of the box" compatible with the legacy Gazell examples provided in the nRFgo SDK for nRF24Lxx devices. The timeslot periods and channel tables require adjustment. - Timeslot period: Edit gzll_params.h file used in the nRF24Lxx projects, or use the nrf_gzll_set_timeslot_period() function in the nRF51 projects (nRF51 Gazell timeslot period = 0.5*GZLL_RX_PERIOD). - Channel table: Edit gzll_params.h file used in the nRF24Lxx projects, or use the nrf_gzll_set_channel_table() function in the nRF51 projects. - Gazell does not support "Low Power Host mode" (Host mode 1). ======================================================================== nRF51 SDK v. 4.4.2 ------------------ Following toolchains/devices have been used for testing and verification: - ARM: MDK-ARM Version 4.72.1.0 - GCC: gcc-arm-embedded 4.7 2013q1 - IAR: embedded workbench for ARM 6.60 - N51822 QFAACA on PCA10004 module on nRF6310 motherboard - N51822 QFAAFA on PCA10005 module on nRF6310 motherboard - Windows XP SP3 32 bit - Windows 7 SP1 64 bit - Windows 8.0/8.1 - BLE SoftDevice Version : s110_nrf51822_5.2.1 - The BLE example applications for HID Keyboard and HID Mouse have been tested with HID host running on Windows 8.1. - Supported boards in nRF51 SDK v. 4.4.2: - PCA10000 v1.0 (Only for use with Master Emulator) - PCA10000 v2.0.0 - PCA10001 v1.0 through v2.1.0 - PCA10003 v1.0 through v2.0.0 - PCA10004 v1.0 through v2.0.0 - PCA10005 v1.0 through v2.1.0 - PCA10006 v1.0 through v2.0.0 - PCA10007 v1.0 through v2.0.0 - PCA10014 v1.0 - PCA10018 v1.0.0 through v1.1.0 Changes: ANT None BLE - Removed ble_dfu_send_hex.exe from device_firmware_update experimental folder. Similar feature is now available in latest Master Control Panel application. Proprietary None Fixed issues: - NRFFOSDK-1750 - Added PAN-11 workaround in PPI, PWM, and Simple PWM motor control examples. - NRFFOSDK-1633 - Added PAN-56 workaround in TWI master driver. ANT None BLE - NRFFOSDK-1025 - The field max_len in rep_char_add signature in ble_hids.c has been corrected to uint16_t. - NRFFOSDK-1921 - In case IRK is distrubuted by a peer using public address whitelist is updated for both IRK and address. - NRFFOSDK-1899 - System attributes re-initialized on rebonding. - NRFFOSDK-1900 - Removed false detection of DIV collisions. - NRFFOSDK-1993 - Increased buffer in hci_mem_pool_internal.h fix the serialization examples. Proprietary None Known issues: - If you have an existing KEIL project target set to use device variant "nRF51", a pop-up might appear stating that you have to "update your device selection". Solution: Press ALT+F7 to open "Options for Target" dialog. Select "Options for Target" -> "Device". Choose "Nordic nRF51 Series Devices" from the Database list. Select the variant of the nRF51 chip that is used for the KEIL project target. - When using J-Link software prior to version 4.66, a warning might appear when entering "Options for Target" -> "Debug" -> "Settings". The warning indicates that the device is unknown to the specific version of the J-Link software. Solution: Upgrade J-Link software to version 4.66 or later. - Segger J-Link software has some issues with Keil. See http://www.segger.com/IDE_Integration_Keil.html#knownproblems for more details. - On some Windows XP machines, J-Link CDC installer fails producing an error message saying it could not find JLinkCDCDriver_x86.msi. Solution: Try running the installer C:\Program Files\SEGGER\JLinkARM_V\USBDriver\JLinkCDCInstaller_V1.2b.exe manually. - NRFFOETT-205 - The nRF51822 installer will not run if no C:\ drive exists - NRFFOSDK-236 - When the bundled J-Link OB CDC driver installation dialog appears, the error message "Failed to install driver (Timeout occurred)" might appear . Ignore it. - NRFFOSDK-362 - Reset button won't work after programming without cycling the target power. - NRFFOSDK-363 - Flashing software using SEGGER is NOT possible when the device is in SYSTEM_OFF mode Solution: Wake-up the current application from SYSTEM_OFF before flashing a new application. - The DFU over BLE example has been tested to work with a minimum connection interval of 11.25 ms. This application will not be able to handle connection intervals lower than 11.25 ms and may undergo a system reset in the middle of a firware update. Workaround: If you face unexpected disconnects during firmware update process, consider increasing the connection interval used by the master. ANT - NRFFOETT-438 - Documentation on S210 SoftDevice API wrongly structured. All SoftDevice functions appear as SVCALL in the Doxygen page. - NRFFOSDK-366 - ANT-FS host: download sometimes fails when downloading a large file. - NRFFOSDK-755 - HRM TX buttons example may report wrong total elapsed time. BLE - NRFFOSDK-119 - Only the "....\sdk\nrf5822\Board\nrf6310\ble\ble_app_pwr_profiling\","....\sdk\nrf5822\Board\pca10001\ble\ble_app_proximity\ ", and "....\sdk\nrf5822\Board\pca10001\ble\ble_app_hrs\ " applications are power optimized. - NRFFOSDK-472 - Bonding information in flash are not erased during programming of a new application. (If the bonding information is not erased manually - by pressing button 1 during start-up - the new application might assert. ) Proprietary: - NRFFOSDK-1769: Not all examples have makefiles, nor have they been tested with the new toolchain. Expect minor compilation issues. - Using Keil versions 4.53 and older will not work unless you change configuration in jlinksettings.ini. See User Guide for more details. - Temperature example does not give sane output values. This is hardware related issue described in PAN_028 and will be fixed in future silicon. - The nRF24Lxx ESB examples found in the legacy nRFready SDKs do not work out of the box with the nRF51 ESB examples. This is due to: - The legacy examples do not use "payload in ACK". - The legacy examples use RF channel 2 (not 10 as the nRF51 examples). - The examples do not use dynamic payload length. The legacy examples need to add the following in order to work with the nRF51 examples: hal_nrf_setup_dynamic_payload(0xFF); hal_nrf_enable_dynamic_payload(true); hal_nrf_enable_ack_payload(true); hal_nrf_set_rf_channel(10); In addition, the legacy PTX example must add code for handling the payloads received in ACK. - The Gazell Link Layer examples are not fully "out of the box" compatible with the legacy Gazell examples provided in the nRFgo SDK for nRF24Lxx devices. The timeslot periods and channel tables require adjustment. - Timeslot period: Edit gzll_params.h file used in the nRF24Lxx projects, or use the nrf_gzll_set_timeslot_period() function in the nRF51 projects (nRF51 Gazell timeslot period = 0.5*GZLL_RX_PERIOD). - Channel table: Edit gzll_params.h file used in the nRF24Lxx projects, or use the nrf_gzll_set_channel_table() function in the nRF51 projects. - Gazell does not support "Low Power Host mode" (Host mode 1). ======================================================================== nRF51 SDK v. 4.4.1 ------------------ Following toolchains/devices have been used for testing and verification: - ARM: MDK-ARM Version 4.71.2 - GCC: gcc-arm-embedded 4.7 2013q1 - IAR: embedded workbench for ARM 6.60 - N51422 QFAACA on PCA10003 evaluation kit board - N51822 QFAACA on PCA10004/5 module on nRF6310 motherboard - Windows XP SP3 32 bit - Windows 7 SP1 64 bit - BLE SoftDevice Version : s110_nrf51822_5.2.1 - The BLE example applications for HID Keyboard and HID Mouse have been tested with HID host running on Windows 8.1 Preview. Changes: - DFU documentation improved. ANT None BLE - NRFFOSDK-1759: Example IAR application for Heart Rate Service added. - NRFFOSDK-1271: Speed and Cadence Control Point added to Cycling Speed and Cadence Service. Proprietary - ESB: Improved tolerance to delayed interrupts. Fixed issues: - NRFFOSDK-1592: Risk of losing timer interrupts when the resolution of the timer is very high, e.g. 1 ms resolution, is now fixed. ANT None BLE - NRFFOETT-399: An IRK is added to the bond manager's whitelist only if the address type of the master is 'resolvable'. - NRFFOETT-552: DTM application is now implementing PCN_083 - NRFFOSDK-1828: Key refresh was triggering a link failure when re-bonding to a master. This is now fixed. - NRFFOETT-571: Premature disconnection scenario handling added to bond manager. Previously this was resulting in system attributes of a master to be cleared. Proprietary - ESB: The nrf_esb_tx_failed() callback function was never called when dynamic acknowledgement was used. This is now fixed. Known issues: - If you have an existing KEIL project target set to use device variant "nRF51", a pop-up might appear stating that you have to "update your device selection". Solution: Press ALT+F7 to open "Options for Target" dialog. Select "Options for Target" -> "Device". Choose "Nordic nRF51 Series Devices" from the Database list. Select the variant of the nRF51 chip that is used for the KEIL project target. - When using J-Link software prior to version 4.66, a warning might appear when entering "Options for Target" -> "Debug" -> "Settings". The warning indicates that the device is unknown to the specific version of the J-Link software. Solution: Upgrade J-Link software to version 4.66 or later. - Segger J-Link software has some issues with Keil. See http://www.segger.com/IDE_Integration_Keil.html#knownproblems for more details. - On some Windows XP machines, J-Link CDC installer fails producing an error message saying it could not find JLinkCDCDriver_x86.msi. Solution: Try running the installer C:\Program Files\SEGGER\JLinkARM_V\USBDriver\JLinkCDCInstaller_V1.2b.exe manually. - NRFFOETT-205 - The nRF51822 installer will not run if no C:\ drive exists - NRFFOSDK-236 - When the bundled J-Link OB CDC driver installation dialog appears, the error message "Failed to install driver (Timeout occurred)" might appear . Ignore it. - NRFFOSDK-362 - Reset button won't work after programming without cycling the target power. - NRFFOSDK-363 - Flashing software using SEGGER is NOT possible when the device is in SYSTEM_OFF mode Solution: Wake-up the current application from SYSTEM_OFF before flashing a new application. - The DFU over BLE example has been tested to work with a minimum connection interval of 11.25 ms. This application will not be able to handle connection intervals lower than 11.25 ms and may undergo a system reset in the middle of a firware update. Workaround: If you face unexpected disconnects during firmware update process, consider increasing the connection interval used by the master. ANT - NRFFOETT-438 - Documentation on S210 SoftDevice API wrongly structured. All SoftDevice functions appear as SVCALL in the Doxygen page. - NRFFOSDK-366 - ANT-FS host: download sometimes fails when downloading a large file. - NRFFOSDK-755 - HRM TX buttons example may report wrong total elapsed time. BLE - NRFFOSDK-119 - Only the "....\sdk\nrf5822\Board\nrf6310\ble\ble_app_pwr_profiling\","....\sdk\nrf5822\Board\pca10001\ble\ble_app_proximity\ ", and "....\sdk\nrf5822\Board\pca10001\ble\ble_app_hrs\ " applications are power optimized. - NRFFOSDK-472 - Bonding information in flash are not erased during programming of a new application. (If the bonding information is not erased manually - by pressing button 1 during start-up - the new application might assert. ) Proprietary: - NRFFOSDK-1769: Not all examples have makefiles, nor have they been tested with the new toolchain. Expect minor compilation issues. - Using Keil versions 4.53 and older will not work unless you change configuration in jlinksettings.ini. See User Guide for more details. - Temperature example does not give sane output values. This is hardware related issue described in PAN_028 and will be fixed in future silicon. - The nRF24Lxx ESB examples found in the legacy nRFready SDKs do not work out of the box with the nRF51 ESB examples. This is due to: - The legacy examples do not use "payload in ACK". - The legacy examples use RF channel 2 (not 10 as the nRF51 examples). - The examples do not use dynamic payload length. The legacy examples need to add the following in order to work with the nRF51 examples: hal_nrf_setup_dynamic_payload(0xFF); hal_nrf_enable_dynamic_payload(true); hal_nrf_enable_ack_payload(true); hal_nrf_set_rf_channel(10); In addition, the legacy PTX example must add code for handling the payloads received in ACK. - The Gazell Link Layer examples are not fully "out of the box" compatible with the legacy Gazell examples provided in the nRFgo SDK for nRF24Lxx devices. The timeslot periods and channel tables require adjustment. - Timeslot period: Edit gzll_params.h file used in the nRF24Lxx projects, or use the nrf_gzll_set_timeslot_period() function in the nRF51 projects (nRF51 Gazell timeslot period = 0.5*GZLL_RX_PERIOD). - Channel table: Edit gzll_params.h file used in the nRF24Lxx projects, or use the nrf_gzll_set_channel_table() function in the nRF51 projects. - Gazell does not support "Low Power Host mode" (Host mode 1). ======================================================================== nRF51 SDK v. 4.4.0 ------------------ Following toolchains/devices have been used for testing and verification: - ARM: MDK-ARM Version 4.71.2 - GCC: gcc-arm-embedded 4.7 2013q1 - N51422 QFAACA on PCA10003 evaluation kit board - N51822 QFAACA on PCA10004/5 module on nRF6310 motherboard - Windows XP SP3 32 bit - Windows 7 SP1 64 bit - BLE SoftDevice Version : s110_nrf51822_5.2.1 - The BLE example applications for HID Keyboard and HID Mouse have been tested with HID host running on Windows 8. Changes: - Device Firmware Update example released as part of the main SDK. - Added support for image transfer over BLE. - HCI Transport Layer used for serial transfer. - Note: This example is implemented to work on nRF6310 motherboard because it uses Button 7 to enter bootloader mode on reset. This is because Button 0 and Button 1 are used by other SDK applications as wakeup buttons. If this example is to be changed to work for evaluation kit board, then this should be taken into consideration. - PC application examples for performing firmware updates using HCI and BLE added in nrf6310\device_firmware_updates\experimental folder. - UICR Configuration example added to the SDK. It can be found in nrf6310\uicr_config_example folder. ANT None BLE - NRFFOETT-507: ble_app_dtm missing bytes on UART fixed. - NRFFOSDK-73 : HID keyboard application will now send one key press per notification. Proprietary None Fixed issues: ANT None BLE - NRFFOSDK-1432: Buffer overflow issue in ble_bondmngr_sys_attr_store() function fixed. - NRFFOETT-339: CCCD values (System Atributes) are now restored on reconnection to a known master only after the link is encrypted. Proprietary None Known issues: - If you have an existing KEIL project target set to use device variant "nRF51", a pop-up might appear stating that you have to "update your device selection". Solution: Press ALT+F7 to open "Options for Target" dialog. Select "Options for Target" -> "Device". Choose "Nordic nRF51 Series Devices" from the Database list. Select the variant of the nRF51 chip that is used for the KEIL project target. - When using J-Link software prior to version 4.66, a warning might appear when entering "Options for Target" -> "Debug" -> "Settings". The warning indicates that the device is unknown to the specific version of the J-Link software. Solution: Upgrade J-Link software to version 4.66 or later. - Segger J-Link software has some issues with Keil. See http://www.segger.com/IDE_Integration_Keil.html#knownproblems for more details. - On some Windows XP machines, J-Link CDC installer fails producing an error message saying it could not find JLinkCDCDriver_x86.msi. Solution: Try running the installer C:\Program Files\SEGGER\JLinkARM_V\USBDriver\JLinkCDCInstaller_V1.2b.exe manually. - NRFFOETT-205 - The nRF51822 installer will not run if no C:\ drive exists - NRFFOSDK-236 - When the bundled J-Link OB CDC driver installation dialog appears, the error message "Failed to install driver (Timeout occurred)" might appear . Ignore it. - NRFFOSDK-362 - Reset button won't work after programming without cycling the target power. - NRFFOSDK-363 - Flashing software using SEGGER is NOT possible when the device is in SYSTEM_OFF mode Solution: Wake-up the current application from SYSTEM_OFF before flashing a new application. - NRFFOSDK-1774: During SDK installation, chosing custom install location for SDK examples will create Start Menu shortcuts that point to Keil installation location. - NRFFOSDK-1592: There is a risk of losing timer interrupts when the resolution of the timer is very high, e.g. 1 ms resolution. - The DFU over BLE example has been tested to work with a minimum connection interval of 11.25 ms. This application will not be able to handle connection intervals lower than 11.25 ms and may undergo a system reset in the middle of a firware update. Workaround: If you face unexpected disconnects during firmware update process, consider increasing the connection interval used by the master. ANT - NRFFOETT-438 - Documentation on S210 SoftDevice API wrongly structured. All SoftDevice functions appear as SVCALL in the Doxygen page. - NRFFOSDK-366 - ANT-FS host: download sometimes fails when downloading a large file. - NRFFOSDK-755 - HRM TX buttons example may report wrong total elapsed time. BLE - NRFFOETT-399 - The bond manager will use distrubted IRK in its whitelist regardless of the type of central's address and should actually use the irk if distributed and if the central's address is not public, and not random_static and not random_private_non_resovable. - NRFFOSDK-119 - Only the "....\sdk\nrf5822\Board\nrf6310\ble\ble_app_pwr_profiling\","....\sdk\nrf5822\Board\pca10001\ble\ble_app_proximity\ ", and "....\sdk\nrf5822\Board\pca10001\ble\ble_app_hrs\ " applications are power optimized. - NRFFOSDK-472 - Bonding information in flash are not erased during programming of a new application. (If the bonding information is not erased manually - by pressing button 1 during start-up - the new application might assert. ) Proprietary: - NRFFOSDK-1769: Not all examples have makefiles, nor have they been tested with the new toolchain. Expect minor compilation issues. - Using Keil versions 4.53 and older will not work unless you change configuration in jlinksettings.ini. See User Guide for more details. - Temperature example does not give sane output values. This is hardware related issue described in PAN_028 and will be fixed in future silicon. - The nRF24Lxx ESB examples found in the legacy nRFready SDKs do not work out of the box with the nRF51 ESB examples. This is due to: - The legacy examples do not use "payload in ACK". - The legacy examples use RF channel 2 (not 10 as the nRF51 examples). - The examples do not use dynamic payload length. The legacy examples need to add the following in order to work with the nRF51 examples: hal_nrf_setup_dynamic_payload(0xFF); hal_nrf_enable_dynamic_payload(true); hal_nrf_enable_ack_payload(true); hal_nrf_set_rf_channel(10); In addition, the legacy PTX example must add code for handling the payloads received in ACK. - The Gazell Link Layer examples are not fully "out of the box" compatible with the legacy Gazell examples provided in the nRFgo SDK for nRF24Lxx devices. The timeslot periods and channel tables require adjustment. - Timeslot period: Edit gzll_params.h file used in the nRF24Lxx projects, or use the nrf_gzll_set_timeslot_period() function in the nRF51 projects (nRF51 Gazell timeslot period = 0.5*GZLL_RX_PERIOD). - Channel table: Edit gzll_params.h file used in the nRF24Lxx projects, or use the nrf_gzll_set_channel_table() function in the nRF51 projects. - Gazell does not support "Low Power Host mode" (Host mode 1). ======================================================================== nRF51 SDK v. 4.3.0 ------------------ Following toolchains/devices have been used for testing and verification: - ARM: MDK-ARM Version 4.60 - GCC: gcc-arm-embedded 4.7 2013q1 - N51422 QFAACA on PCA10003 evaluation kit board - N51822 QFAACA on PCA10004/5 module on nRF6310 motherboard - Windows XP SP3 32 bit - Windows 7 SP1 64 bit - BLE SoftDevice Version : s110_nrf51822_5.2.0 Changes: - Supported GCC toolchain switched from CodeSourcery to gcc-arm-embedded. - New gcc startup file, linker scripts, and makefiles. - Updated CMSIS header files in Include/gcc to the latest revision (3.20). - Makefile target "all" now runs "clean" and "debug" targets instead of incremental "release" target. - nrf.h requires projects to have a define for a chip to enable some needed workarounds. - SDK examples now support PCA10000 v2.0.0. To make the examples work on the older PCA10000 v1.0, the UART pins need to be remapped in the pca10000.h header file. For v1.0 #define RX_PIN_NUMBER 3 #define TX_PIN_NUMBER 1 #define CTS_PIN_NUMBER 2 #define RTS_PIN_NUMBER 0 For v2.0.0 #define RX_PIN_NUMBER 11 #define TX_PIN_NUMBER 9 #define CTS_PIN_NUMBER 10 #define RTS_PIN_NUMBER 8 ANT - ANT examples have been updated to support the newest UART API. BLE - HCI Transport Layer from Bluetooth Specification v4.0 introduced for BLE S110 Serialized Applications. - BLE S110 Serialization Examples released as part of the main SDK. - Updated serialized ble_app_advertising and ble_app_hrs to use app_scheduler. - Connection Parameter update module : Added possibility to request different connection parameters multiple times. A new event, BLE_CONN_PARAMS_EVT_SUCCEEDED has been created. Event handler implementation needs to take this into account, especially if they were implemented to trigger a disconnect regardless of the type of event. - Added Makefile and Eclipse project file for ble_app_hrs. - Changed hard coded flash pages to be FICR CODESIZE dependent. Proprietary - Gazell: - Added Gazell Pairing Host source code and board example. Backwards compatible with nRF24L Gazell Pairing Device and Host modules. - Added function nrf_gzll_set_auto_disable(uint32_t num_ticks), to disable Gazell after a number of timeslots. - Added function nrf_gzll_get_tick_count(). - Gazell Pairing Device now uses nrf_gzll_get_tick_count() in order to implement a delay. This reduces current consumption. - Default sync_lifetime value has been increased to 3*channel_table_size*number_of_timeslots_per_channel. This improves performance in high-interference environments. Current users who are satisfied with the performance may wish to maintain the minimum value of 1*channel_table_size*number_of_timeslots_per_channel, in order to avoid any slight increase in current consumption. - Enhanced ShockBurst: - ESB PTX now calls nrf_esb_tx_success() callback instead of nrf_esb_tx_failed() for NOACK packets. - Fix in nrf_esb_set_mode() - Information concerning backwards compatibility with nRF24L devices has been moved to the User Guide. Fixed issues: - Examples doing flash writes were not waiting for writes to finish. ANT - NRFFOSDK-1312 - Changed ANTFS_TRANSMIT_POWER define in antfs.h from 0 to 3. The define previously had an incorrect definition which set the power value to -20dBm instead of 0dBm even though the comment indicated 0dBm. BLE - NRFFOETT-402 - DFU Bootloader application in experimental project now sets stack pointer correctly before executing reset vector of application. Proprietary - NRFFOETT-301 - Radio example uses obsolete RADIO_TXPOWER_TXPOWER_Neg40dBm definition. - Fixed issue in TWI HW driver. Event was not cleared before waiting it to get cleared. - Floating point ABI used by Makefiles was incorrect. Now using mabi-float=soft. - Gazell/ESB: Fixed set_mode() functionality. - Gazell GCC board examples startup and run correctly with the GCC libraries. - A Gazell Device nows stop the RSSI measurement when no ACK is received, improving the base current consumption. Known issues: - If you have an existing KEIL project target set to use device variant "nRF51", a pop-up might appear stating that you have to "update your device selection". Solution: Press ALT+F7 to open "Options for Target" dialog. Select "Options for Target" -> "Device". Choose "Nordic nRF51 Series Devices" from the Database list. Select the variant of the nRF51 chip that is used for the KEIL project target. - When using J-Link software prior to version 4.66, a warning might appear when entering "Options for Target" -> "Debug" -> "Settings". The warning indicates that the device is unknown to the specific version of the J-Link software. Solution: Upgrade J-Link software to version 4.66 or later. - Segger J-Link software has some issues with Keil. See http://www.segger.com/IDE_Integration_Keil.html#knownproblems for more details. - On some Windows XP machines, J-Link CDC installer fails producing an error message saying it could not find JLinkCDCDriver_x86.msi. Solution: Try running the installer C:\Program Files\SEGGER\JLinkARM_V\USBDriver\JLinkCDCInstaller_V1.2b.exe manually. - NRFFOETT-205 - The nRF51822 installer will not run if no C:\ drive exists - NRFFOSDK-236 - When the bundled J-Link OB CDC driver installation dialog appears, the error message "Failed to install driver (Timeout occurred)" might appear . Ignore it. - NRFFOSDK-362 - Reset button won't work after programming without cycling the target power. - NRFFOSDK-363 - Flashing software using SEGGER is NOT possible when the device is in SYSTEM_OFF mode Solution: Wake-up the current application from SYSTEM_OFF before flashing a new application. ANT - NRFFOETT-438 - Documentation on S210 SoftDevice API wrongly structured. All SoftDevice functions appear as SVCALL in the Doxygen page. - NRFFOSDK-366 - ANT-FS host: download sometimes fails when downloading a large file. - NRFFOSDK-755 - HRM TX buttons example may report wrong total elapsed time. BLE - NRFFOETT-399 - The bond manager will use distrubted IRK in its whitelist regardless of the type of central's address and should actually use the irk if distributed and if the central's address is not public, and not random_static and not random_private_non_resovable. - NRFFOSDK-1432 - A buffer overflow has been discovered in the BLE bond manager upon system attributes store. Workaround, define BLE_BONDMNGR_MAX_BONDED_MASTERS in ble_bondmngr_cfg.h to be 1 higher than the number of bond required by the applicaiton. - NRFFOSDK-119 - Only the "....\sdk\nrf5822\Board\nrf6310\ble\ble_app_pwr_profiling\","....\sdk\nrf5822\Board\pca10001\ble\ble_app_proximity\ ", and "....\sdk\nrf5822\Board\pca10001\ble\ble_app_hrs\ " applications are power optimized. - NRFFOSDK-472 - Bonding information in flash are not erased during programming of a new application. (If the bonding information is not erased manually - by pressing button 1 during start-up - the new application might assert. ) Proprietary: - Not all examples have makefiles, nor have they been tested with the new toolchain. Expect minor compilation issues. - Using Keil versions 4.53 and older will not work unless you change configuration in jlinksettings.ini. See User Guide for more details. - Temperature example does not give sane output values. This is hardware related issue described in PAN_028 and will be fixed in future silicon. - The nRF24Lxx ESB examples found in the legacy nRFready SDKs do not work out of the box with the nRF51 ESB examples. This is due to: - The legacy examples do not use "payload in ACK". - The legacy examples use RF channel 2 (not 10 as the nRF51 examples). - The examples do not use dynamic payload length. The legacy examples need to add the following in order to work with the nRF51 examples: hal_nrf_setup_dynamic_payload(0xFF); hal_nrf_enable_dynamic_payload(true); hal_nrf_enable_ack_payload(true); hal_nrf_set_rf_channel(10); In addition, the legacy PTX example must add code for handling the payloads received in ACK. - The Gazell Link Layer examples are not fully "out of the box" compatible with the legacy Gazell examples provided in the nRFgo SDK for nRF24Lxx devices. The timeslot periods and channel tables require adjustment. - Timeslot period: Edit gzll_params.h file used in the nRF24Lxx projects, or use the nrf_gzll_set_timeslot_period() function in the nRF51 projects (nRF51 Gazell timeslot period = 0.5*GZLL_RX_PERIOD). - Channel table: Edit gzll_params.h file used in the nRF24Lxx projects, or use the nrf_gzll_set_channel_table() function in the nRF51 projects. - Gazell does not support "Low Power Host mode" (Host mode 1). ======================================================================== nRF51 SDK v. 4.2.0 ------------------ Following toolchains/devices have been used for testing and verification: - ARM: MDK-ARM Version 4.60 - N51422 QFAACA on PCA10003 evaluation kit board - N51822 QFAACA on PCA10004/5 module on nRF6310 motherboard - Windows XP SP3 32 bit - Windows 7 SP1 64 bit - BLE SoftDevice Version : s110_nrf51822_5.1.0 Changes: ANT BLE - NRFFOSDK-623 - BLE S110 DFU Bootloader prototype added to experimental folder. - NRFFOSDK-996 - Delete of individual bonds in Bond Manager. API extension. Validity check of stored bond added to Bond Manager API. - NRFFOSDK-745 - Extended BLE S110 Serialized API. Added serialized Heartrate example to exprimental folder. Proprietary Fixed issues: - NRFFOSDK-1015 - nRFgo Display lock up after a reset ANT BLE - NRFFOSDK-486 - All applications using bond manager will assert when the maximum number of bonded masters is passed. Proprietary Known issues: - If you have an existing KEIL project target set to use device variant "nRF51", a pop-up might appear stating that you have to "update your device selection". Solution: Press ALT+F7 to open "Options for Target" dialog. Select "Options for Target" -> "Device". Choose "Nordic nRF51 Series Devices" from the Database list. Select the variant of the nRF51 chip that is used for the KEIL project target. - When using J-Link software prior to version 4.66, a warning might appear when entering "Options for Target" -> "Debug" -> "Settings". The warning indicates that the device is unknown to the specific version of the J-Link software. Solution: Upgrade J-Link software to version 4.66 or later. - Segger J-Link software has some issues with Keil. See http://www.segger.com/IDE_Integration_Keil.html#knownproblems for more details. - On some Windows XP machines, J-Link CDC installer fails producing an error message saying it could not find JLinkCDCDriver_x86.msi. Solution: Try running the installer C:\Program Files\SEGGER\JLinkARM_V\USBDriver\JLinkCDCInstaller_V1.2b.exe manually. - NRFFOETT-205 - The nRF51822 installer will not run if no C:\ drive exists - NRFFOSDK-236 - When the bundled J-Link OB CDC driver installation dialog appears, the error message "Failed to install driver (Timeout occurred)" might appear . Ignore it. - NRFFOSDK-362 - Reset button won't work after programming without cycling the target power. - NRFFOSDK-363 - Flashing software using SEGGER is NOT possible when the device is in SYSTEM_OFF mode Solution: Wake-up the current application from SYTEM_OFF before flashing a new application. ANT - NRFFOSDK-366 - ANT-FS host: download sometimes fails when downloading a large file. - NRFFOSDK-755 - HRM TX buttons example may report wrong total elapsed time. BLE - NRFFOSDK-119 - Only the "....\sdk\nrf5822\Board\nrf6310\ble\ble_app_pwr_profiling\","....\sdk\nrf5822\Board\pca10001\ble\ble_app_proximity\ ", and "....\sdk\nrf5822\Board\pca10001\ble\ble_app_hrs\ " applications are power optimized. - NRFFOSDK-472 - Bonding information in flash are not erased during programming of a new application. (If the bonding information is not erased manually - by pressing button 1 during start-up - the new application might assert. ) Proprietary: - Using Keil versions 4.53 and older will not work unless you change configuration in jlinksettings.ini. See User Guide for more details. - Temperature example does not give sane output values. This is hardware related issue described in PAN_028 and will be fixed in future silicon. - The nRF24Lxx ESB examples found in the legacy nRFready SDKs do not work out of the box with the nRF51 ESB examples. This is due to: - The legacy examples do not use "payload in ACK". - The legacy examples use RF channel 2 (not 10 as the nRF51 examples). - The examples do not use dynamic payload length. The legacy examples need to add the following in order to work with the nRF51 examples: hal_nrf_setup_dynamic_payload(0xFF); hal_nrf_enable_dynamic_payload(true); hal_nrf_enable_ack_payload(true); hal_nrf_set_rf_channel(10); In addition, the legacy PTX example must add code for handling the payloads received in ACK. - The Gazell Link Layer examples are not fully "out of the box" compatible with the legacy Gazell examples provided in the nRFgo SDK for nRF24Lxx devices. The timeslot periods and channel tables require adjustment. - Timeslot period: Edit gzll_params.h file used in the nRF24Lxx projects, or use the nrf_gzll_set_timeslot_period() function in the nRF51 projects (nRF51 Gazell timeslot period = 0.5*GZLL_RX_PERIOD). - Channel table: Edit gzll_params.h file used in the nRF24Lxx projects, or use the nrf_gzll_set_channel_table() function in the nRF51 projects. - Gazell does not support "Low Power Host mode" (Host mode 1). ======================================================================== nRF51 SDK v. 4.1.0 ------------------ Following toolchains/devices have been used for testing and verification: - ARM: MDK-ARM Version 4.60 - N51422 QFAACA on PCA10003 evaluation kit board - N51822 QFAACA on PCA10004/5 module on nRF6310 motherboard - Windows XP SP3 32 bit - Windows 7 SP1 64 bit - BLE SoftDevice Version : s110_nrf51822_5.0.0 Changes: - nRF51 device variant removed from KEIL device database and replaced with nRF51 series specific devices. - Added nrf6310_experimental folder to the nRF51 SDK which contains examples and modules under development. - Experimental version of the SoftDevice S110 serialization API with examples. - Removed obsolete Master Emulator firmware from the release (nrf51822\Board\pca10000\ble\master_emulator\MEFW_nRF51822_firmware.hex). - Renamed twi_sw_master_example to twi_master_example ANT BLE - Updated SoftDevice S110 specific documentation to include message sequence charts. Proprietary Fixed issues: - NRFFOETT-257 - twi_master_clear_bus() functionality fix done. - NRFFOSDK-953 - twi_hw_master.c functionality fix done. ANT BLE - NRFFOSDK-758 - Button 1 does not wake up Bluetooth examples applications. To erase bonding information from system-off mode, press both button 0 and button 1. Proprietary Known issues: - If you have an existing KEIL project target set to use device variant "nRF51", a pop-up might appear stating that you have to "update your device selection". Solution: Press ALT+F7 to open "Options for Target" dialog. Select "Options for Target" -> "Device". Choose "Nordic nRF51 Series Devices" from the Database list. Select the variant of the nRF51 chip that is used for the KEIL project target. - When using J-Link software prior to version 4.66, a warning might appear when entering "Options for Target" -> "Debug" -> "Settings". The warning indicates that the device is unknown to the specific version of the J-Link software. Solution: Upgrade J-Link software to version 4.66 or later. - Segger J-Link software has some issues with Keil. See http://www.segger.com/IDE_Integration_Keil.html#knownproblems for more details. - On some Windows XP machines, J-Link CDC installer fails producing an error message saying it could not find JLinkCDCDriver_x86.msi. Solution: Try running the installer C:\Program Files\SEGGER\JLinkARM_V\USBDriver\JLinkCDCInstaller_V1.2b.exe manually. - NRFFOETT-205 - The nRF51822 installer will not run if no C:\ drive exists - NRFFOSDK-236 - When the bundled J-Link OB CDC driver installation dialog appears, the error message "Failed to install driver (Timeout occurred)" might appear . Ignore it. - NRFFOSDK-362 - Reset button won't work after programming without cycling the target power. - NRFFOSDK-363 - Flashing software using SEGGER is NOT possible when the device is in SYSTEM_OFF mode Solution: Wake-up the current application from SYTEM_OFF before flashing a new application. ANT - NRFFOSDK-366 - ANT-FS host: download sometimes fails when downloading a large file. - NRFFOSDK-755 - HRM TX buttons example may report wrong total elapsed time. BLE - NRFFOSDK-119 - Only the "....\sdk\nrf5822\Board\nrf6310\ble\ble_app_pwr_profiling\","....\sdk\nrf5822\Board\pca10001\ble\ble_app_proximity\ ", and "....\sdk\nrf5822\Board\pca10001\ble\ble_app_hrs\ " applications are power optimized. - NRFFOSDK-472 - Bonding information in flash are not erased during programming of a new application. (If the bonding information is not erased manually - by pressing button 1 during start-up - the new application might assert. ) - NRFFOSDK-486 - All applications using the bond manager will assert when the maximum number of bonded masters is passed. See proximity application documentation. Proprietary: - Using Keil versions 4.53 and older will not work unless you change configuration in jlinksettings.ini. See User Guide for more details. - Temperature example does not give sane output values. This is hardware related issue described in PAN_028 and will be fixed in future silicon. - The nRF24Lxx ESB examples found in the legacy nRFready SDKs do not work out of the box with the nRF51 ESB examples. This is due to: - The legacy examples do not use "payload in ACK". - The legacy examples use RF channel 2 (not 10 as the nRF51 examples). - The examples do not use dynamic payload length. The legacy examples need to add the following in order to work with the nRF51 examples: hal_nrf_setup_dynamic_payload(0xFF); hal_nrf_enable_dynamic_payload(true); hal_nrf_enable_ack_payload(true); hal_nrf_set_rf_channel(10); In addition, the legacy PTX example must add code for handling the payloads received in ACK. - The Gazell Link Layer examples are not fully "out of the box" compatible with the legacy Gazell examples provided in the nRFgo SDK for nRF24Lxx devices. The timeslot periods and channel tables require adjustment. - Timeslot period: Edit gzll_params.h file used in the nRF24Lxx projects, or use the nrf_gzll_set_timeslot_period() function in the nRF51 projects (nRF51 Gazell timeslot period = 0.5*GZLL_RX_PERIOD). - Channel table: Edit gzll_params.h file used in the nRF24Lxx projects, or use the nrf_gzll_set_channel_table() function in the nRF51 projects. - Gazell does not support "Low Power Host mode" (Host mode 1). ======================================================================== nRF51 SDK v. 4.0.1 ------------------ Following toolchains/devices have been used for testing and verification: - ARM: MDK-ARM Version 4.60 - N51422 QFAACA on PCA10006 module on nRF6310 motherboard - N51822 QFAACA on PCA10001 evaluation kit board - Windows XP SP3 32-bit - Windows 7 SP1 64-bit - BLE SoftDevice Version : s110_nrf51822_4.0.0-2.beta Changes: - Adressed poor search functionality in the documentation by upgrading used Doxygen version and adding a CHM version of the documentation. Proprietary - ESB/Gazell: A hard PLL rampdown is now implemented which shortens the TX to RX switching time to match nRF24L devices. Fixed issues: - NRFFOSDK-801 - Project memory layout was incorrect for S110 4.0.0 targets. - NRFFOETT-249 - gcc_nrf51_s110.ld had wrong SoftDevice size. ANT BLE - NRFFOSDK-807 - Made changes to the default assert handler. - NRFFOSDK-800 - Bug when switching between BLE and Gazell mode on buttons presses fixed. - NRFFOETT-225 - DTM didn't work with Tescom TC3000C and R&S CBT. - NRFFOETT-262 - Evaluation kit BLE examples had button pin pullup resistors disabled. - NRFFOSDK-804 - Excluded ble_sps.c and ble_sps.h from release as they have not been fully implemented. Proprietary - ESB/Gazell: The peripherals are no longer prepared for use by the nrf_esb_init() and nrf_gzll_init() functions. This is performed in the SystemInit() function. Known issues: - Segger JLink has some issues with Keil. See http://www.segger.com/IDE_Integration_Keil.html#knownproblems for more details. On some Windows XP machines JLink CDC installer fails with error message saying it could not find JLinkCDCDriver_x86.msi. Try running the installer C:\Program Files\SEGGER\JLinkARM_V\USBDriver\JLinkCDCInstaller_V1.2b.exe manually. - NRFFOETT-205 - The nRF51 SDK installer will not run if no C:\ drive exists - NRFFOSDK-236 - When the bundled JLink OB CDC driver installation dialog appears, it might pop up an error saying "Failed to install driver (Timeout occurred)". Ignore it. - NRFFOSDK-362 - Reset button won't work after programming without cycling the target power - NRFFOSDK-363 - Flashing a software using SEGGER is NOT possible when the device is in SYSTEM_OFF mode (implies to wake-up the current application from SYTEM_OFF before flashing a new application) ANT - NRFFOSDK-366 - ANT-FS host: download some times fails when downloading large file. - NRFFOSDK-755 - HRM TX buttons example may report wrong total elapsed time. BLE - NRFFOSDK-119 - Only the "....\sdk\nrf5822\Board\nrf6310\ble\ble_app_pwr_profiling\","....\sdk\nrf5822\Board\pca10001\ble\ble_app_proximity\ ", and "....\sdk\nrf5822\Board\pca10001\ble\ble_app_hrs\ " applications are power optimized - NRFFOSDK-472 - Bonding information in flash are not erased during programming of a new application If the bonding information are not erased manually - by pressing button 1 during start-up - the new application might assert. - NRFFOSDK-486 - All applications using bond manager will assert when the maximum number of bonded masters is passed - See proximity application documentation. - NRFFOSDK-758 - Button 1 does not wake up Bluetooth examples applications. To erase bonding information from system-off mode, press on both button 0 and button 1. - NRFFOSDK-759 - Unable to switch to BLE mode from gazell mode in Multiprotocol application Proprietary: - Using Keil versions 4.53 and older will not work unless you change configuration in jlinksettings.ini. See User Guide for more details. - Temperature example does not give sane output values. This is hardware related issue described in PAN_028 and will be fixed in future silicon. - The nRF24Lxx ESB examples found in the legacy nRFready SDKs do not work out of the box with the nRF51 ESB examples. This is due to: - The legacy examples do not use "payload in ACK". - The legacy examples use RF channel 2 (not 10 as the nRF51 examples). - The examples do not use dynamic payload length. The legacy examples need to add the following in order to work with the nRF51 examples: hal_nrf_setup_dynamic_payload(0xFF); hal_nrf_enable_dynamic_payload(true); hal_nrf_enable_ack_payload(true); hal_nrf_set_rf_channel(10); In addition, the legacy PTX example must add code for handling the payloads received in ACK. - The Gazell Link Layer examples are not fully "out of the box" compatible with the legacy Gazell examples provided in the nRFgo SDK for nRF24Lxx devices. The timeslot periods and channel tables require adjustment. - Timeslot period: Edit gzll_params.h file used in the nRF24Lxx projects, or use the nrf_gzll_set_timeslot_period() function in the nRF51 projects (nRF51 Gazell timeslot period = 0.5*GZLL_RX_PERIOD). - Channel table: Edit gzll_params.h file used in the nRF24Lxx projects, or use the nrf_gzll_set_channel_table() function in the nRF51 projects. - Gazell does not support "Low Power Host mode" (Host mode 1). ======================================================================== nRF51 SDK v. 4.0.0 ----------------- Following toolchains/devices have been used for testing and verification: - ARM: MDK-ARM Version 4.60 - N51422 QFAACA on PCA10006 module on nRF6310 motherboard - N51822 QFAACA on PCA10001 evaluation kit board - Windows XP SP3 32-bit - Windows 7 SP1 64-bit Changes: - NRFFOSDK-192 - Interrupt driven low power UART module added. - NRFFOSDK-543 - Set of common modules used by nRF51xxx examples added. ANT - NRFFOSDK-312 - adapt to renaming of SoftDevice S210 V2.0.0 APIs BLE - NRFFOSDK-55 - adapt to renaming of SoftDevice S110 V4.0.0 APIs Fixed issues: - NRFFOSDK-563 - nRF51 SDK installer - Keil CDB not installing correctly on PC's running Win7 w/Asian Locales (prim: Japanese/Chinese). ANT - NRFFOSDK-484 - HRM TX background pages are not following 65th packet rule according to spec BLE - NRFFOSDK-361 - System attributes are stored in flash only after disconnect. API ble_bondmngr_sys_attr_store to save system attributes while in a connection is now available. Known issues: - Segger JLink has some issues with Keil. See http://www.segger.com/IDE_Integration_Keil.html#knownproblems for more details. On some Windows XP machines JLink CDC installer fails with error message saying it could not find JLinkCDCDriver_x86.msi. Try running the installer C:\Program Files\SEGGER\JLinkARM_V\USBDriver\JLinkCDCInstaller_V1.2b.exe manually. - NRFFOETT-205 - The nRF51822 installer will not run if no C:\ drive exists - NRFFOSDK-236 - When the bundled JLink OB CDC driver installation dialog appears, it might pop up an error saying "Failed to install driver (Timeout occurred)". Ignore it. - NRFFOSDK-362 - Reset button won't work after programming without cycling the target power - NRFFOSDK-363 - Flashing a software using SEGGER is NOT possible when the device is in SYSTEM_OFF mode (implies to wake-up the current application from SYTEM_OFF before flashing a new application) ANT - NRFFOSDK-366 - ANT-FS host: download some times fails when downloading large file. - NRFFOSDK-755 - HRM TX buttons example may report wrong total elapsed time. BLE - NRFFOSDK-119 - Only the "....\sdk\nrf5822\Board\nrf6310\ble\ble_app_pwr_profiling\","....\sdk\nrf5822\Board\pca10001\ble\ble_app_proximity\ ", and "....\sdk\nrf5822\Board\pca10001\ble\ble_app_hrs\ " applications are power optimized - NRFFOSDK-472 - Bonding information in flash are not erased during programming of a new application If the bonding information are not erased manually - by pressing button 1 during start-up - the new application might assert. - NRFFOSDK-486 - All applications using bond manager will assert when the maximum number of bonded masters is passed - See proximity application documentation. - NRFFOSDK-758 - Button 1 does not wake up Bluetooth examples applications. To erase bonding information from system-off mode, press on both button 0 and button 1. - NRFFOSDK-759 - Unable to switch to BLE mode from gazell mode in Multiprotocol application Proprietary: - ESB/Gazell: Calling nrf_esb_init() or nrf_gzll_init() will disable usage of the GPIOTE peripheral. - Using Keil versions 4.53 and older will not work unless you change configuration in jlinksettings.ini. See User Guide for more details. - Temperature example does not give sane output values. This is hardware related issue described in PAN_028 and will be fixed in future silicon. - The nRF24Lxx ESB examples found in the legacy nRFready SDKs do not work out of the box with the nRF51 ESB examples. This is due to: - The legacy examples do not use "payload in ACK". - The legacy examples use RF channel 2 (not 10 as the nRF51 examples). - The examples do not use dynamic payload length. The legacy examples need to add the following in order to work with the nRF51 examples: hal_nrf_setup_dynamic_payload(0xFF); hal_nrf_enable_dynamic_payload(true); hal_nrf_enable_ack_payload(true); hal_nrf_set_rf_channel(10); In addition, the legacy PTX example must add code for handling the payloads received in ACK. - The Gazell Link Layer examples are not fully "out of the box" compatible with the legacy Gazell examples provided in the nRFgo SDK for nRF24Lxx devices. The timeslot periods and channel tables require adjustment. - Timeslot period: Edit gzll_params.h file used in the nRF24Lxx projects, or use the nrf_gzll_set_timeslot_period() function in the nRF51 projects (nRF51 Gazell timeslot period = 0.5*GZLL_RX_PERIOD). - Channel table: Edit gzll_params.h file used in the nRF24Lxx projects, or use the nrf_gzll_set_channel_table() function in the nRF51 projects. - Gazell does not support "Low Power Host mode" (Host mode 1). ======================================================================== nRF51 SDK v3.0.0 ----------------- Following toolchains/devices have been used for testing and verification: - ARM: MDK-ARM Version 4.60 - Windows XP SP3 32-bit - Windows 7 SP1 64-bit Changes: - Merged nRF514 and nRF518 SDKs - system_nrf51.c: GPIOTE peripheral turned on during system init. ANT - Added ANT bicycle power-only sensor example - Added ANT combined bicycle speed and cadence sensor example BLE - Added Direct Test Mode (DTM) source code - Added Glucose Meter service and example - Added Health Thermometer service and example - Added Blood Pressure service and example - Added Proximity example for evaluation board - Bond manager and flash module modified to write bonding information in flash while in a connection Fixed issues: BLE -NRFFOSDK-120 - ble_bondmngr_store_bonded_masters function from the bond manager cannot be used when advertising nor when in a connection The bonding information are now written while in a connection but not the system attributes information. ANT - Fixed incorrect event time generation in ANT HRM Tx example - NRFFOSDK-469 - ANT - bicycle power rx: doxygen architecture picture defect - NRFFOSDK-470 - ANT - bicycle power tx: doxygen architecture picture defect Proprietary: - twi_hw_master example : Fixed deadlock when stop condition was not issued. (NRFFOETT-167) - Bugfix: Polarity of on-air "no_ack" bit inverted to comply with legacy nRF24L01 hardware ESB. Known issues: - Segger JLink has some issues with Keil. See http://www.segger.com/IDE_Integration_Keil.html#knownproblems for more details. On some Windows XP machines JLink CDC installer fails with error message saying it could not find JLinkCDCDriver_x86.msi. Try running the installer C:\Program Files\SEGGER\JLinkARM_V\USBDriver\JLinkCDCInstaller_V1.2b.exe manually. - NRFFOSDK-236 - When the bundled JLink OB CDC driver installation dialog appears, it might pop up an error saying "Failed to install driver (Timeout occurred)". Ignore it. - NRFFOSDK-362 - Reset button won't work after programming without cycling the target power - NRFFOSDK-363 - Flashing a software using SEGGER is NOT possible when the device is in SYSTEM_OFF mode (implies to wake-up the current application from SYTEM_OFF before flashing a new application) ANT - ARCH-506 - ANT-FS host; download could fail when downloading large files. - NRFFOSDK-484 - HRM TX background pages are not following 65th packet rule according to spec BLE - NRFFOSDK-119 - Only the "....\sdk\nrf5822\Board\nrf6310\ble\ble_app_pwr_profiling\","....\sdk\nrf5822\Board\pca10001\ble\ble_app_proximity\ ", and "....\sdk\nrf5822\Board\pca10001\ble\ble_app_hrs\ " applications are power optimized - NRFFOSDK-361 - System attributes are stored in flash only after disconnect. - NRFFOSDK-472 - Bonding information in flash are not erased during programming of a new application If the bonding information are not erased manually - by pressing button 1 during start-up - the new application might assert. - NRFFOSDK-486 - All applications using bond manager will assert when the maximum number of bonded masters is passed For more information, see proximity application documentation. Proprietary: - ESB/Gazell: Calling nrf_esb_init() or nrf_gzll_init() will disable usage of the GPIOTE peripheral. - Using Keil versions 4.53 and older will not work unless you change configuration in jlinksettings.ini. See User Guide for more details. - Temperature example does not give sane output values. This is hardware related issue described in PAN_028 and will be fixed in future silicon. - The nRF24Lxx ESB examples found in the legacy nRFready SDKs do not work out of the box with the nRF51 ESB examples. This is due to: - The legacy examples do not use "payload in ACK". - The legacy examples use RF channel 2 (not 10 as the nRF51 examples). - The examples do not use dynamic payload length. The legacy examples need to add the following in order to work with the nRF51 examples: hal_nrf_setup_dynamic_payload(0xFF); hal_nrf_enable_dynamic_payload(true); hal_nrf_enable_ack_payload(true); hal_nrf_set_rf_channel(10); In addition, the legacy PTX example must add code for handling the payloads received in ACK. - The Gazell Link Layer examples are not fully "out of the box" compatible with the legacy Gazell examples provided in the nRFgo SDK for nRF24Lxx devices. The timeslot periods and channel tables require adjustment. - Timeslot period: Edit gzll_params.h file used in the nRF24Lxx projects, or use the nrf_gzll_set_timeslot_period() function in the nRF51 projects (nRF51 Gazell timeslot period = 0.5*GZLL_RX_PERIOD). - Channel table: Edit gzll_params.h file used in the nRF24Lxx projects, or use the nrf_gzll_set_channel_table() function in the nRF51 projects. - Gazell does not support "Low Power Host mode" (Host mode 1). Notification ANT: - This is last release that will support N51422 QFAACA (ANT). Next release will contain API changes. ======================================================== Old release notes from before SDK merge ======================================================== nRF518 SDK v2.0.0 ----------------- Following toolchains/devices have been used for testing and verification: - ARM: MDK-ARM Version 4.60 - N51822 QFAACA on PCA10000 evaluation kit USB dongle - N51822 QFAACA on PCA10001 evaluation kit board - N51822 QFAACA on PCA10004 module on nRF6310 motherboard - Windows XP SP3 32-bit - Windows 7 SP1 64-bit Bluetooth: - Bluetooth Low Energy SoftDevice S110_nRF51822_2.0.0_alpha1 Gazell / ESB libraries on-air compatible with the following SDKs for legacy nRF24Lxx devices: - nRFgo SDK 2.3.0 - nRFready Desktop 1.2.3 Changes: Bluetooth: - Adapted examples for updated S110 API (S110_nRF51822_2.0.0_alpha1). - Added Find Me (Immediate Alert Service as client) to Proximity Application. - Added Alert Notification (client) service and example. - Added Cycling Speed and Cadence service and example. - Added Running Speed and Cadence service and example. - Bond Manager modified to add Whitelist handling and CRC verification of flash. - Bond Manager usage added to all examples except for power profiling application. - Use of Whitelist added to Proximity, HID Mouse and HID Keyboard examples. - Use of directed advertisement added to HID Mouse and HID Keyboard examples. - Timer Module refactored. Proprietary: - Added nRF24L series address conversion functions to radio_example. - Added support for GCC to nRF51 Code Examples, ESB and Gazell examples. - Examples no longer use deprecated PERPOWER register. - Disabled "Download to flash" and "Verify Code Download" in JLink debug Download Options. - All SDK release notes are now in this file. - Added hardware flow control option to simple_uart. - Fixed compilation problems with Keil ARM MDK v4.60 and ram retention, temperature and blinky examples. - debouncer_example, ppi_example and timer_example now explicitly set timer bitmode. - keil_arm_uv4.lnt include folder changed from C:\Keil\ARM\RV31\INC to C:\Keil\ARM\ARMCC\INC. - Corrected location of SFR files in UV projects. - ESB: ESB PRX transceiver operations are shorted, removing continuous wave transmission and improving speed and current consumption. - ESB: PRX starts listening immediately after sending an ACK, no longer waiting for the next timeslot. - ESB: The NOACK bit is changed to an ACK bit to ensure compatibility with L01 radios. The L01 product specification is incorrect, only devices using dynamic ack will see this. - ESB: esb_is_enabled function added. - ESB: Disabling CRC checking on PRX/Host side works correctly - ESB: Added support for controlling the XOSC outside the ESB library - Gazell: Added support for controlling the XOSC outside the Gazell library - GZP: No longer deletes pairing data on gzp_init. Added functions to check if device has pairing data and delete all pairing info from flash. - GZP: gzp_desktop_emulator example requires only one key press to pair and has been tested to work on SoftDevice. - GZP: nrf_nvmc_write_bytes correctly iterates through bytes. Fixed issues: - Examples use deprecated PERPOWER register. Proprietary: - When using Keil ARM MDK v4.60 the ram retention, temperature and blinky examples might fail during compilation. - Gazell and ESB examples point to wrong SFR file (should be SFD\Nordic\nRF51\nRF51822.sfr). Bluetooth: - The buttons on the evaluation board are not debounced. Known issues: - Segger JLink has some issues with Keil. See http://www.segger.com/IDE_Integration_Keil.html#knownproblems for more details. - On some Windows XP machines JLink CDC installer fails with error message saying it could not find JLinkCDCDriver_x86.msi. Try running the installer C:\Program Files\SEGGER\JLinkARM_V\USBDriver\JLinkCDCInstaller_V1.2b.exe manually. - When the bundled JLink OB CDC driver installation dialog appears, it might pop up an error saying "Failed to install driver (Timeout occurred)". Ignore it. (DRGN-1807) - Reset button won't work after programing without cycling the target power. (DRGN-1885) - Flashing a software using SEGGER is possible only when NOT in SYSTEM_OFF mode (implies to wake-up the current application with a button press for example before flashing a new application).(DRGN-1925) Bluetooth: - Only the ..\sdk\nrf5822\Board\nrf6310\ble\ble_app_pwr_profiling\ and ..\sdk\nrf5822\Board\pca10001\ble\ble_app_hrs\ applications are power optimized.(DRGN-1914) - ble_bondmngr_store_bonded_masters function from the bond manager cannot be used when advertising nor when in a connection (DRGN-1915) (flash erase/write prevents the CPU from running which means the stack will not be able to run properly.) If ble_bondmngr_store_bonded_masters function is called while advertising or in a connection, the behavior is UNDEFINED. Proprietary: - ESB/Gazell: Calling nrf_esb_init() or nrf_gzll_init() will disable usage of the GPIOTE peripheral. In order to use the GPIOTE peripheral, the workaround in PAN 22 must be performed after calling these functions. - Using Keil versions 4.53 and older will not work unless you change configuration in jlinksettings.ini. See User Guide for more details. - Temperature example does not give sane output values. This is hardware related issue described in PAN_028 and will be fixed in future silicon. - The nRF24Lxx ESB examples found in the legacy nRFready SDKs do not work out of the box with the nRF51 ESB examples. This is due to: - The legacy examples do not use "payload in ACK". - The legacy examples use RF channel 2 (not 10 as the nRF51 examples). - The examples do not use dynamic payload length. The legacy examples need to add the following in order to work with the nRF51 examples: hal_nrf_setup_dynamic_payload(0xFF); hal_nrf_enable_dynamic_payload(true); hal_nrf_enable_ack_payload(true); hal_nrf_set_rf_channel(10); In addition, the legacy PTX example must add code for handling the payloads received in ACK. - The Gazell Link Layer examples are not fully "out of the box" compatible with the legacy Gazell examples provided in the nRFgo SDK for nRF24Lxx devices. The timeslot periods and channel tables require adjustment. - Timeslot period: Edit gzll_params.h file used in the nRF24Lxx projects, or use the nrf_gzll_set_timeslot_period() function in the nRF51 projects (nRF51 Gazell timeslot period = 0.5*GZLL_RX_PERIOD). - Channel table: Edit gzll_params.h file used in the nRF24Lxx projects, or use the nrf_gzll_set_channel_table() function in the nRF51 projects. - Gazell does not support "Low Power Host mode" (Host mode 1). nRF518 SDK v1.1.1 ----------------- Changes: - Master Control Panel updated to version 3.1.1. Includes fix for issue where pca10000 master emulator devices did not get detected. Known issues: - When the bundled JLink OB CDC driver installation dialog appears, it might pop up an error saying "Failed to install driver (Timeout occurred)". Ignore it. - When using Keil ARM MDK v4.60 the ram retention, temperature and blinky examples might fail during compilation and leave an error message like this: C3900U: Unrecognized option '--asm'. C3900U: Unrecognized option '--interleave'. To fix this Click Alt+F7, choose "Listing" tab. Uncheck "C Compiler Listing" - Previous issues from v1.1.0 does still apply nRF518 SDK v1.1.0 ----------------- Following toolchains/devices have been used for testing and verification: - ARM: MDK-ARM Version 4.54 - N51822 QFAACA on PCA10004 module on nRF6310 motherboard - N51822 QFAACA on PCA10000 USB dongle - N51822 QFAACA on PCA10001 board - Windows XP SP3 32-bit - Windows 7 SP1 64-bit Known issues: - Examples use depracated PERPOWER register. Future silicon will power up peripherals after reset and PERPOWER register will be removed. - Using Keil versions 4.53 and older will not work unless you change configuration in jlinksettings.ini. See User Guide for more details. - Temperature example does not give sane output values. This is hardware related issue described in - Segger JLink has some issues with Keil. See http://www.segger.com/IDE_Integration_Keil.html#knownproblems for more details. - On some Windows XP machines JLink CDC installer fails with error message saying it could not find JLinkCDCDriver_x86.msi. Try running the installer C:\Program Files\SEGGER\JLinkARM_V\USBDriver\JLinkCDCInstaller_V1.2b.exe manually. - Gazell and ESB examples point to wrong SFR file (should be SFD\Nordic\nRF51\nRF51822.sfr). - Reset button wont work after programing without cycling the target power. Workaround is to update system_nrf51.c with void SystemInit (void) { /* Switch ON both RAM banks */ NRF_POWER->RESET = POWER_RESET_RESET_Enabled; NRF_POWER->RAMON |= (POWER_RAMON_ONRAM0_RAM0On << POWER_RAMON_ONRAM0_Pos) | (POWER_RAMON_ONRAM1_RAM1On << POWER_RAMON_ONRAM1_Pos); } Bluetooth: - The button on the evaluation board are not debounced in hardware and the application implementing for it does not debounce the button presses either (using software mechanisms). So there will be additional increments/decrements of heart rate measurement while pressing the buttons. nRF518 SDK v1.0.0 ----------------- Following toolchains/devices have been used for testing and verification: - ARM: MDK-ARM Version 4.54 - N51822 QFAACA on nRF2752 module on nRF6310 motherboard - Windows XP SP3 32-bit - Windows 7 SP1 64-bit Bluetooth: - S110 SoftDevice v1.0.0 - J-Link ARM v4.52b or higher This release contains the following: Bluetooth: - Complete source code needed for writing applications on top of S110 SoftDevice (BLE Stack) - Template application that can be used as a starting point to develop custom applications. - Example application for Heart Rate Service - Example application for Proximity profile - Example application for HID Mouse - Example application for HID Keyboard - Power profiling application - Example application using Heart Rate Service for Evaluation Board (PCA10001) - Multiprotocol application that implements the Heart Rate profile in Bluetooth mode and the Gazell 'device' mode. - Documentation Known issues: - Examples use depracated PERPOWER register. Future silicon will power up peripherals after reset and PERPOWER register will be removed. - Using Keil versions 4.53 and older will not work unless you change configuration in jlinksettings.ini. See User Guide for more details. - Temperature example does not give sane output values. This is hardware related issue described in - Segger JLink has some issues with Keil. See http://www.segger.com/IDE_Integration_Keil.html#knownproblems for more details. - On some Windows XP machines JLink CDC installer fails with error message saying it could not find JLinkCDCDriver_x86.msi. Try running the installer C:\Program Files\SEGGER\JLinkARM_V\USBDriver\JLinkCDCInstaller_V1.2b.exe manually. - Gazell and ESB examples point to wrong SFR file (should be SFD\Nordic\nRF51\nRF51822.sfr). - Reset button wont work after programing without cycling the target power. Workaround is to update system_nrf51.c with void SystemInit (void) { /* Switch ON both RAM banks */ NRF_POWER->RESET = POWER_RESET_RESET_Enabled; NRF_POWER->RAMON |= (POWER_RAMON_ONRAM0_RAM0On << POWER_RAMON_ONRAM0_Pos) | (POWER_RAMON_ONRAM1_RAM1On << POWER_RAMON_ONRAM1_Pos); } - Spi master function spi_master_init() sends two dummy bytes. This will be removed in a future release. - timer_example nrf_timer_delay_ms() will not give expected results using parameter values over 65 ms. Bluetooth: - The button on the evaluation board are not debounced in hardware and the application implementing for it does not debounce the button presses either (using software mechanisms). So there will be additional increments/decrements of heart rate measurement while pressing the buttons. nRF514 SDK v.1.2.0 ------------------ Following toolchains/devices have been used for testing and verification: - ARM: MDK-ARM Version 4.60 - N51422 QFAACA on PCA10004 module on nRF6310 motherboard - N51422 QFAACA on PCA10006 module on nRF6310 motherboard - N51822 QFAACA on nRF2752 module on nRF6310 motherboard - N51822 QFAACA on PCA10001 evaluation kit board - Windows XP SP3 32-bit - Windows 7 SP1 64-bit Changes: - Added Bicycle Power minimal slave example. - Added Stride and Distance Monitor minimal slave and master example. - Removed deprecated PERPOWER register from examples and header files. Known issues: - Segger JLink has some issues with Keil. See http://www.segger.com/IDE_Integration_Keil.html#knownproblems for more details. - On some Windows XP machines JLink CDC installer fails with error message saying it could not find JLinkCDCDriver_x86.msi. - Try running the installer C:\Program Files\SEGGER\JLinkARM_V\USBDriver\JLinkCDCInstaller_V1.2b.exe manually. - When the bundled JLink OB CDC driver installation dialog appears, it might pop up an error saying "Failed to install driver (Timeout occurred)". Ignore it. - Flashing a software using SEGGER is NOT possible when the device is in SYSTEM_OFF mode (implies to wake-up the current application from SYTEM_OFF before flashing a new application) - Reset button won't work after programming with Keil without cycling the target power. On the other hand if nrfjprog with -p (pin reset) is used to program the device, reset button will work. - Using -p option in nrfjprog too heavily might block JLink. This block can be resolved by re-cycling the JLink power. nRF514 SDK v1.1.0 ----------------- Following toolchains/devices have been used for testing and verification: - ARM: MDK-ARM Version 4.54 - N51422 QFAACA on PCA10001 module - N51422 QFAACA on a PCA10005 modulea on nRF6310 motherboard Known issues: - When having an application which starts up by putting the chip in SystemOff mode, and wakeup source is not configured correctly, the device cannot be programmed. Workaround: Use nrfjprog with "recover" option to wipe the application keeping the application in SystemOff mode. - For PCA10003 examples using UART, the terminal program on the PC has to release the COM port when PCA10003 is power cycled. It is not possible for the PCA10003 to keep a connection up when performing a power cycle. Workaround: Close terminal program for each time you want to perform a power recycle Changes: - Added examples for PCA10003 Evaluation kit. - Added nrfjprog.exe - Nordic Semiconductor command line nRF51 programming tool using JLink dll's. - Added custom system_nrf51422.c in templates folder for handling reset after flashing and turning all peripherals on (except GPIOTE) as described in PAN028. - Removed references to depricated PERPOWER register in ANT code examples. - Added compiler flag to the ANT examples, to easier being able to run examples without any UART. - Modified simple_uart_config() parameters. Added new parameters for flow control - Added include/boards folder for handling examples targeted for different boards - Fixed bug in timer_example - Fixed bug in spi_example nRF514 SDK v1.0.0 ----------------- Following toolchains/devices have been used for testing and verification: - ARM: MDK-ARM Version 4.54 - N51822 QFAACA on nRF2754 module on nRF6310 motherboard - Tested on Windows 7 64-bit Known issues: - Examples use depracated PERPOWER register. Future silicon will power up peripherals after reset and PERPOWER register will be removed. - Using Keil versions 4.53 and older will not work unless you change configuration in jlinksettings.ini. See User Guide for more details. - Temperature example does not give sane output values. This is hardware related issue described in - Segger JLink has some issues with Keil. See http://www.segger.com/IDE_Integration_Keil.html#knownproblems for more details. - Reset button wont work after programing without cycling the target power. Workaround is to update system_nrf51.c with void SystemInit (void) { /* Switch ON both RAM banks */ NRF_POWER->RESET = POWER_RESET_RESET_Enabled; NRF_POWER->RAMON |= (POWER_RAMON_ONRAM0_RAM0On << POWER_RAMON_ONRAM0_Pos) | (POWER_RAMON_ONRAM1_RAM1On << POWER_RAMON_ONRAM1_Pos); } - Spi master function spi_master_init() sends two dummy bytes. This will be removed in a future release. - timer_example nrf_timer_delay_ms() will not give expected results using parameter values over 65 ms. Changes: - First public release