To abstract from the actual hardware that is used to run an example, some examples use the Board Support Package. This module provides definitions of BSP indication states, which are indicated in different ways on different boards.

BSP indication states

Some examples use Board Support Package (BSP) states instead of a fast assignment of LEDs to indicate states. In this way, examples can easily be tested on different boards, like the development board and the dongle. States are indicated in different ways depending on the hardware that is used.

The following table lists how the BSP states are indicated on PCA10028 and PCA10031:

BSP state	PCA10028	PCA10031
BSP_INDICATE_IDLE	All LEDs are off	All LEDs are off
BSP_INDICATE_SCANNING	LED 1 is blinking (period 2 sec, duty cycle: 10%)	Red LED is blinking (period 2 sec, duty cycle: 10%)
BSP_INDICATE_ADVERTISING	LED 1 is blinking (period 2 sec, duty cycle: 10%)	Red LED is blinking (period 2 sec, duty cycle: 10%)
BSP_INDICATE_ADVERTISING_WHITELIST	LED 1 is blinking fast (period 1 sec, duty cycle: 20%)	Red LED is blinking fast (period 1 sec, duty cycle: 20%)
BSP_INDICATE_ADVERTISING_SLOW	LED 1 is blinking slowly (period 4.4 sec, duty cycle: 10%)	Red LED is is blinking slowly (period 4.4 sec, duty cycle: 10%)
BSP_INDICATE_ADVERTISING_DIRECTED	LED 1 is blinking very fast (period 0.6 sec, duty cycle: 50%)	Red LED is blinking very fast (period 0.6 sec, duty cycle: 50%)
BSP_INDICATE_BONDING	LED 1 is blinking (period 200 msec, duty cycle: 50%)	Red LED is blinking (period 200 msec, duty cycle: 50%)
BSP_INDICATE_CONNECTED	LED 1 is on	Red LED is on
BSP_INDICATE_SENT_OK	LED 2 is inverted for 100 msec	Green LED is inverted for 100 msec
BSP_INDICATE_SEND_ERROR	LED 2 is inverted for 500 msec	Green LED is inverted for 500 msec
BSP_INDICATE_RCV_OK	LED 2 is inverted for 100 msec	Green LED is inverted for 100 msec
BSP_INDICATE_RCV_ERROR	LED 2 is inverted for 500 msec	Green LED is inverted for 500 msec
BSP_INDICATE_FATAL_ERROR	All LEDs are on	All LEDs are on
BSP_INDICATE_USER_STATE_OFF	All LEDs are off	All LEDs are off
BSP_INDICATE_USER_STATE_0	LEDs 2, 3, and 4 are off, LED 1 is on	Green and blue LEDs are off, red LED is on
BSP_INDICATE_USER_STATE_1	LEDs 1, 3, and 4 are off, LED 2 is on	Red and blue LED are off, green LED is on
BSP_INDICATE_USER_STATE_2	LEDs 3 and 4 are off, LEDs 1 and 2 are on	Blue LED is off, red and green LEDs are on
BSP_INDICATE_USER_STATE_3	All LEDs are on	All LEDs are on
BSP_INDICATE_USER_STATE_ON	All LEDs are on	All LEDs are on

The following BSP alerts can be indicated on top of the states described in the previous table:

BSP alert	PCA10028	PCA10031
BSP_INDICATE_ALERT_0	LED 3 is blinking (period 1200 msec, duty cycle: 50%)	Blue LED is blinking (period 1200 msec, duty cycle: 50%)
BSP_INDICATE_ALERT_1	LED 3 is blinking (period 800 msec, duty cycle: 50%)	Blue LED is blinking (period 800 msec, duty cycle: 50%)
BSP_INDICATE_ALERT_2	LED 3 is blinking (period 400 msec, duty cycle: 50%)	Blue LED is blinking (period 400 msec, duty cycle: 50%)
BSP_INDICATE_ALERT_3	LED 3 is on	Blue LED is on
BSP_INDICATE_ALERT_OFF	LED 3 is off	Blue LED is off

The states are defined in bsp_indication_t.