Clock Example

The Clock Example demonstrates the use of the clock peripherals. The example initializes the clock driver and configures an RTC0 tick event to toggle LED 1 (using PPI). The application then loops while toggling the state of the low-frequency clock, LFCLK, every 1000 milliseconds.

The name of the example is clock_pca10028. If you are not using the Keil Pack Installer, you can find the source code and project file of the example in the following folder: <InstallFolder>\examples\peripheral\clock

Testing

Test the Clock Example application by performing the following steps:

1. Compile and program the application.
2. Observe that LED 1 starts and stops blinking every second.