BLE S120 GAP Events

Table of Contents

• 0x10 - BLE_GAP_EVT_CONNECTED
  • Event packet encoding
  • Encoding of BLE GAP Event - Connected
  • Encoding of Peer Address
  • Encoding of IRK byte
  • Encoding of GAP Connection Parameters
• 0x11 - BLE_GAP_EVT_DISCONNECTED
  • Event packet encoding
  • Encoding of BLE GAP Disconnected event
• 0x12 - BLE_GAP_EVT_CONN_PARAM_UPDATE
  • Event packet encoding
  • Encoding of GAP Connection Parameter Update event
• 0x13 - BLE_GAP_EVT_SEC_PARAMS_REQUEST
  • Event packet encoding
  • Encoding of GAP Security Parameters Request event
  • Encoding of Bond, MITM, IO Caps and OOB
  • Encoding of Key Distribution Bitmap
• 0x14 - BLE_GAP_EVT_SEC_INFO_REQUEST
  • Event packet encoding
  • Encoding of GAP Connection Security Updated event
  • Encoding of Security mode and Level
• 0x15 - BLE_GAP_EVT_PASSKEY_DISPLAY
  • Event packet encoding
  • Encoding of BLE GAP Passkey display event
• 0x16 - BLE_GAP_EVT_AUTH_KEY_REQUEST
  • Event packet encoding
  • Encoding of BLE GAP auth key request event
• 0x17 - BLE_GAP_EVT_AUTH_STATUS
  • Event packet encoding
  • Encoding of GAP Connection Security Updated event
• 0x18 - BLE_GAP_EVT_CONN_SEC_UPDATE
  • Event packet encoding
• 0x19 - BLE_GAP_EVT_TIMEOUT
  • Event packet encoding
  • Encoding of BLE GAP Timeout event
• 0x1A - BLE_GAP_EVT_RSSI_CHANGED
  • Event packet encoding
  • Encoding of BLE GAP RSSI Changed event
• 0x1B - BLE_GAP_EVT_ADV_REPORT
  • Event packet encoding
  • Encoding of BLE ADV REPORT event
• 0x1C - BLE_GAP_EVT_SEC_REQUEST
  • Event packet encoding
  • Encoding of BLE GAP SEC Request event
• 0x1D - BLE_GAP_EVT_CONN_PARAM_UPDATE_REQUEST
  • Event packet encoding
  • Encoding of BLE GAP CONN PARAM Update Request event

0x10 - BLE_GAP_EVT_CONNECTED

Event packet encoding

Frame format encoding of the BLE_GAP_EVT_CONNECTED packet.

Event ID = 0x10 for BLE_GAP_EVT_CONNECTED.

All BLE Events, ble_evt_t, are encoded with the header ble_evt_hdr_t first, containing only the 'Event ID', followed by the event. The 'Event Length' will not be encoded as the size of the event could be of different sizes depending on decoder architecture.

The BLE GAP event contains a connection handle, and for the BLE GAP Connected event, the ble_gap_evt_connected_t is encoded after connection handle as seen in Figure 1.

The order of the encoding is:

Length	Parameter	Value
2 bytes	Connection Handle	see ble_gap_evt_t::conn_handle
7 bytes	Peer Address: ble_gap_addr_t	(See Figure 2 for details on encoding)
1 byte	Bitfields: - IRK Index: 7 bits, - IRK Match: 1 bit	(See Figure 3 for details on encoding)
8 bytes	GAP Connection Parameters: ble_gap_conn_params_t	(See Figure 4 for details on encoding)

Encoding of BLE GAP Event - Connected

Figure 1: Encoding of BLE GAP Connected event.

Encoding of Peer Address

Figure 2: Encoding of peer address inside the BLE GAP Connected event.

Encoding of IRK byte

Figure 3: Encoding of IRK byte inside BLE GAP Connected event.

Encoding of GAP Connection Parameters

Figure 4: Encoding of GAP Connection Parameters inside the BLE GAP Connected event.

0x11 - BLE_GAP_EVT_DISCONNECTED

Event packet encoding

Frame format encoding of the BLE_GAP_EVT_DISCONNECTED packet.

Event ID = 0x11 for BLE_GAP_EVT_DISCONNECTED.

All BLE Events, ble_evt_t, are encoded with the header ble_evt_hdr_t first, containing only the 'Event ID', followed by the event. The 'Event Length' will not be encoded as the size of the event could be of different sizes depending on decoder architecture.

The BLE GAP event contains a connection handle, and for the BLE GAP Disconnected event, the ble_gap_evt_disconnected_t is encoded after connection handle as seen in Figure 1.

The order of the encoding is:

Length	Parameter	Value
2 bytes	Connection Handle	see ble_gap_evt_t::conn_handle
1 byte	Reason	see ble_gap_evt_disconnected_t::reason

Encoding of BLE GAP Disconnected event

Figure 1: Encoding of BLE GAP Disconnected event.

0x12 - BLE_GAP_EVT_CONN_PARAM_UPDATE

Event packet encoding

Frame format encoding of the BLE_GAP_EVT_CONN_PARAM_UPDATE packet.

Event ID = 0x12 for BLE_GAP_EVT_CONN_PARAM_UPDATE

All BLE Events, ble_evt_t, are encoded with the header ble_evt_hdr_t first, containing only the 'Event ID', followed by the event. The 'Event Length' will not be encoded as the size of the event could be of different sizes depending on decoder architecture.

The BLE GAP event contains a connection handle, and for the BLE GAP Connect Parameter Update event, the ble_gap_evt_conn_param_update_t is encoded after connection handle as seen in Figure 1.

The order of the encoding is:

Length	Parameter	Value
2 bytes	Connection Handle	see ble_gap_evt_t::conn_handle
8 bytes	GAP Connection Parameters ble_gap_conn_params_t	(See Figure 1 for details on encoding)

Encoding of GAP Connection Parameter Update event

Figure 1: Encoding of GAP Connection Parameter Update event.

0x13 - BLE_GAP_EVT_SEC_PARAMS_REQUEST

Event packet encoding

Frame format encoding of the BLE_GAP_EVT_SEC_PARAMS_REQUEST packet.

Event ID = 0x13 for BLE_GAP_EVT_SEC_PARAMS_REQUEST

All BLE Events, ble_evt_t, are encoded with the header ble_evt_hdr_t first, containing only the 'Event ID', followed by the event. The 'Event Length' will not be encoded as the size of the event could be of different sizes depending on decoder architecture.

The BLE GAP event contains a connection handle, and for the BLE GAP Security Parameters Request event, the ble_gap_evt_sec_params_request_t is encoded after connection handle as seen in Figure 1.

The Bond, MITM, IO Capabilities and OOB fields are all bitfields inside 1 byte as seen in Figure 2.

The order of the encoding is:

Length	Parameter	Value
2 bytes	Connection Handle	see ble_gap_evt_t::conn_handle
1 byte	Bitfields: - Bond: 1 bit, - MITM: 1 bit, - IO Capabilities: 3 bits, - OOB: 1 bit	(See Figure 2 for details on encoding)
1 byte	Minimum Keysize	see ble_gap_sec_params_t::min_key_size
1 byte	Maximum Keysize	see ble_gap_sec_params_t::max_key_size
1 byte	Peripheral Key Distribution Bitmap: - enc: 1 bit, - id: 1 bit, - sign: 1 bit	see ble_gap_sec_params_t::kdist_periph
1 byte	Central Key Distribution Bitmap: - enc: 1 bit, - id: 1 bit, - sign: 1 bit	see ble_gap_sec_params_t::kdist_central

Encoding of GAP Security Parameters Request event

Figure 1: Encoding of GAP Security Parameters Request event.

Encoding of Bond, MITM, IO Caps and OOB

Figure 2: Encoding of Bond, MITM, IO Caps and OOB inside a GAP Security Parameters Request event.

Encoding of Key Distribution Bitmap

Encodings of Central and Peripheral Key Distribution Bitmaps are the same.

Figure 3: Encoding of Key Distribution Bitmap inside a GAP Security Parameters Request event.

0x14 - BLE_GAP_EVT_SEC_INFO_REQUEST

Event packet encoding

Frame format encoding of the BLE_GAP_EVT_SEC_INFO_REQUEST packet.

Event ID = 0x14 for BLE_GAP_EVT_SEC_PARAMS_REQUEST

All BLE Events, ble_evt_t, are encoded with the header ble_evt_hdr_t first, containing only the 'Event ID', followed by the event. The 'Event Length' will not be encoded as the size of the event could be of different sizes depending on decoder architecture.

The BLE GAP event contains a connection handle, and for the BLE GAP Security Info Request event, the ble_gap_evt_sec_info_request_t is encoded after connection handle as seen in Figure 1.

The "Encryption info present", "Identity info present", and "Signing info present" flags are all bitfields inside 1 byte as seen in Figure 2.

The order of the encoding is:

Length	Parameter	Value
2 bytes	Connection Handle	see ble_gap_evt_t::conn_handle
1 byte	Address Type	see ble_gap_addr_t::addr_type
6 bytes	Address	see ble_gap_addr_t::addr
2 bytes	Master ID	see ble_gap_master_id_t
1 byte	Bitfields: - Encryption info: 1 bit, - Identity info: 1 bit, - Signing info: 1 bit	(See Figure 2 for details on encoding)

Encoding of GAP Connection Security Updated event

Figure 1: Encoding of GAP Security Info Request event.

Encoding of Security mode and Level

Figure 2: Encoding of Encryption info, Identity info, and Signing info inside a GAP Security Info Request event.

0x15 - BLE_GAP_EVT_PASSKEY_DISPLAY

Event packet encoding

Frame format encoding of the BLE_GAP_EVT_PASSKEY_DISPLAY packet.

Event ID = 0x15 for BLE_GAP_EVT_PASSKEY_DISPLAY.

All BLE Events, ble_evt_t, are encoded with the header ble_evt_hdr_t first, containing only the 'Event ID', followed by the event. The 'Event Length' will not be encoded as the size of the event could be of different sizes depending on decoder architecture.

The BLE GAP event contains a connection handle, and for the BLE GAP Passkey display event, the ble_gap_evt_passkey_display_t is encoded after connection handle as seen in Figure 1.

The order of the encoding is:

Length	Parameter	Value
2 bytes	Connection Handle	see ble_gap_evt_t::conn_handle
6 bytes	Passkey	see ble_gap_evt_passkey_display_t::passkey

Encoding of BLE GAP Passkey display event

Figure 1: Encoding of BLE GAP Passkey Display event.

0x16 - BLE_GAP_EVT_AUTH_KEY_REQUEST

Event packet encoding

Frame format encoding of the BLE_GAP_EVT_AUTH_KEY_REQUEST packet.

Event ID = 0x16 for BLE_GAP_EVT_AUTH_KEY_REQUEST.

All BLE Events, ble_evt_t, are encoded with the header ble_evt_hdr_t first, containing only the 'Event ID', followed by the event. The 'Event Length' will not be encoded as the size of the event could be of different sizes depending on decoder architecture.

The BLE GAP event contains a connection handle, and for the BLE GAP key request event, the ble_gap_evt_auth_key_request_t is encoded after connection handle as seen in Figure 1.

The order of the encoding is:

Length	Parameter	Value
2 bytes	Connection Handle	see ble_gap_evt_t::conn_handle
1 byte	Key type	see ble_gap_evt_auth_key_request_t::key_type

Encoding of BLE GAP auth key request event

Figure 1: Encoding of BLE GAP auth key request event.

0x17 - BLE_GAP_EVT_AUTH_STATUS

Event packet encoding

Frame format encoding of the BLE_GAP_EVT_AUTH_STATUS packet.

Event ID = 0x17 for BLE_GAP_EVT_AUTH_STATUS

All BLE Events, ble_evt_t, are encoded with the header ble_evt_hdr_t first, containing only the 'Event ID', followed by the event. The 'Event Length' will not be encoded as the size of the event could be of different sizes depending on decoder architecture.

The BLE GAP event contains a connection handle, and for the BLE GAP Authentication Status event, the ble_gap_evt_auth_status_t is encoded after connection handle as seen in Figure 1.

The order of the encoding is:

Length	Parameter	Value
2 bytes	Connection Handle	see ble_gap_evt_t::conn_handle
1 byte	Authentication Status
1 byte	Error Source	bonded error_src
1 byte	Security levels mode1	lv1 lv2 lv3
1 byte	Security levels mode2	lv1 lv2 lv3
1 byte	Keys distribution - peripheral	enc id sign
1 byte	Keys distribution - central	enc id sign

Encoding of GAP Connection Security Updated event

Figure 1: Encoding of GAP Authentication Status event.

0x18 - BLE_GAP_EVT_CONN_SEC_UPDATE

Event packet encoding

Frame format encoding of the BLE_GAP_EVT_CONN_SEC_UPDATE packet.

Event ID = 0x18 for BLE_GAP_EVT_CONN_SEC_UPDATE

All BLE Events, ble_evt_t, are encoded with the header ble_evt_hdr_t first, containing only the 'Event ID', followed by the event. The 'Event Length' will not be encoded as the size of the event could be of different sizes depending on decoder architecture.

The BLE GAP event contains a connection handle, and for the BLE GAP Security Info Request event, the ble_gap_evt_conn_sec_update_t is encoded after connection handle as seen in Figure 1.

The security mode and level are both bitfields inside 1 byte as seen in Figure 2.

The order of the encoding is:

Length	Parameter	Value
2 bytes	Connection Handle	see ble_gap_evt_t::conn_handle
1 byte	Security Mode bitfields: - Security mode (sm): 4 bits, - Level (lv): 4 bits	(See Figure 2 for details on encoding)
1 byte	Encryption Key Size	see ble_gap_conn_sec_t::encr_key_size

Encoding of GAP Connection Security Updated event

Figure 1: Encoding of GAP Connection Security Updated event.

Encoding of Security mode and Level

Figure 2: Encoding of Security mode and Level inside a GAP Connection Security Updated event.

0x19 - BLE_GAP_EVT_TIMEOUT

Event packet encoding

Frame format encoding of the BLE_GAP_EVT_TIMEOUT packet.

Event ID = 0x19 for BLE_GAP_EVT_TIMEOUT

All BLE Events, ble_evt_t, are encoded with the header ble_evt_hdr_t first, containing only the 'Event ID', followed by the event. The 'Event Length' will not be encoded as the size of the event could be of different sizes depending on decoder architecture.

The BLE GAP event contains a connection handle, and for the BLE GAP Timeout event, the ble_gap_evt_timeout_t is encoded after connection handle as seen in Figure 1.

The order of the encoding is:

Length	Parameter	Value
2 bytes	Connection Handle	see ble_gap_evt_t::conn_handle
1 byte	Timeout Source	see ble_gap_evt_timeout_t::src

Encoding of BLE GAP Timeout event

Figure 1: Encoding of BLE GAP Timeout event.

0x1A - BLE_GAP_EVT_RSSI_CHANGED

Event packet encoding

Frame format encoding of the BLE_GAP_EVT_RSSI_CHANGED packet.

Event ID = 0x1A for BLE_GAP_EVT_RSSI_CHANGED

All BLE Events, ble_evt_t, are encoded with the header ble_evt_hdr_t first, containing only the 'Event ID', followed by the event. The 'Event Length' will not be encoded as the size of the event could be of different sizes depending on decoder architecture.

The BLE GAP event contains a connection handle, and for the BLE GAP RSSI Changed event, the ble_gap_evt_rssi_changed_t is encoded after connection handle as seen in Figure 1.

The order of the encoding is:

Length	Parameter	Value
2 bytes	Connection Handle	see ble_gap_evt_t::conn_handle
1 byte	RSSI	see ble_gap_evt_rssi_changed_t::rssi

Encoding of BLE GAP RSSI Changed event

Figure 1: Encoding of BLE GAP RSSI Changed event.

0x1B - BLE_GAP_EVT_ADV_REPORT

Event packet encoding

Frame format encoding of the BLE_GAP_EVT_ADV_REPORT packet.

Event ID = 0x1B for BLE_GAP_EVT_ADV_REPORT

All BLE Events, ble_evt_t, are encoded with the header ble_evt_hdr_t first, containing only the 'Event ID', followed by the event. The 'Event Length' will not be encoded as the size of the event could be of different sizes depending on decoder architecture.

The BLE GAP event contains a connection handle, and for the BLE ADV REPORT event, the ble_gap_evt_adv_report_t is encoded after connection handle as seen in Figure 1.

The order of the encoding is:

Length	Parameter	Value
2 bytes	Connection Handle	see ble_gap_evt_t::conn_handle
1 byte	Address Type	see ble_gap_addr_t::addr_type
6 bytes	Address	see ble_gap_addr_t::addr
1 byte	RSSI	see ble_gap_evt_rssi_changed_t::rssi
1 byte	Flags	scan_rsp:1 type:2 dlen:5
0..31 bytes	Data	data bytes

Encoding of BLE ADV REPORT event

Figure 1: Encoding of BLE ADV REPORT event.

0x1C - BLE_GAP_EVT_SEC_REQUEST

Event packet encoding

Frame format encoding of the BLE_GAP_EVT_SEC_REQUEST packet.

Event ID = 0x1C for BLE_GAP_EVT_SEC_REQUEST

All BLE Events, ble_evt_t, are encoded with the header ble_evt_hdr_t first, containing only the 'Event ID', followed by the event. The 'Event Length' will not be encoded as the size of the event could be of different sizes depending on decoder architecture.

The BLE GAP event contains a connection handle, and for the BLE GAP SEC Request event, the ble_gap_evt_sec_request_t is encoded after connection handle as seen in Figure 1.

The order of the encoding is:

Length	Parameter	Value
2 bytes	Connection Handle	see ble_gap_evt_t::conn_handle
1 byte	Bond, MITM	see ble_gap_evt_sec_request_t::bond and ble_gap_evt_sec_request_t::mitm

Encoding of BLE GAP SEC Request event

Figure 1: Encoding of BLE GAP SEC Request event.

0x1D - BLE_GAP_EVT_CONN_PARAM_UPDATE_REQUEST

Event packet encoding

Frame format encoding of the BLE_GAP_EVT_CONN_PARAM_UPDATE_REQUEST packet.

Event ID = 0x1D for BLE_GAP_EVT_CONN_PARAM_UPDATE_REQUEST

All BLE Events, ble_evt_t, are encoded with the header ble_evt_hdr_t first, containing only the 'Event ID', followed by the event. The 'Event Length' will not be encoded as the size of the event could be of different sizes depending on decoder architecture.

The BLE GAP event contains a connection handle, and for the BLE GAP CONN PARAM Update Request event, the ble_gap_evt_conn_param_update_request_t is encoded after connection handle as seen in Figure 1.

The order of the encoding is:

Length	Parameter	Value
2 bytes	Connection Handle	see ble_gap_evt_t::conn_handle
8 bytes	Connection Parameters	see BLE_GAP_EVT_CONNECTED codec for encoding details

Encoding of BLE GAP CONN PARAM Update Request event

Figure 1: Encoding of BLE GAP SEC CONN PARAM Update Request event.