RPMsg service
Overview
RPMsg Service is an abstraction created over OpenAMP that makes initialization and endpoints creation process easier. This application demonstrates how to use RPMsg Service in Zephyr. It is designed to demonstrate how to integrate RPMsg Service with Zephyr both from a build perspective and code. Note that the remote and primary image core images can be flashed independently, but sysbuild must be used in order to flash them in one step.
Building the application for nrf5340dk_nrf5340_cpuapp
# From the root of the zephyr repository
west build -b nrf5340dk_nrf5340_cpuapp samples/subsys/ipc/rpmsg_service
west debug
Building the application for mps2_an521
# From the root of the zephyr repository
west build -b mps2_an521 samples/subsys/ipc/rpmsg_service
west debug
Building the application for v2m_musca_b1
# From the root of the zephyr repository
west build -b v2m_musca_b1 samples/subsys/ipc/rpmsg_service
west debug
Open a serial terminal (minicom, putty, etc.) and connect the board with the following settings:
Speed: 115200
Data: 8 bits
Parity: None
Stop bits: 1
Reset the board and the following message will appear on the corresponding serial port, one is master another is remote:
**** Booting Zephyr OS build zephyr-v1.14.0-2064-g888fc98fddaa ****
Starting application thread!
RPMsg Service [master] demo started
Master core received a message: 1
Master core received a message: 3
Master core received a message: 5
...
Master core received a message: 99
RPMsg Service demo ended.
**** Booting Zephyr OS build zephyr-v1.14.0-2064-g888fc98fddaa ****
Starting application thread!
RPMsg Service [remote] demo started
Remote core received a message: 0
Remote core received a message: 2
Remote core received a message: 4
...
Remote core received a message: 98
RPMsg Service demo ended.
Building the application for bl5340_dvk_cpuapp
# From the root of the zephyr repository
west build -b bl5340_dvk_cpuapp samples/subsys/ipc/rpmsg_service
west debug
# From the root of the zephyr repository
west build -b bl5340_dvk_cpunet samples/subsys/ipc/rpmsg_service
west debug
Open a serial terminal (for example Minicom or PuTTY) and connect to the board with the following settings on both serial ports:
Speed: 115200
Data: 8 bits
Parity: None
Stop bits: 1
When you reset the development kit after having flashed both the application and network core images, the following messages (one for master and one for remote) will appear on the corresponding serial ports:
*** Booting Zephyr OS build v2.7.0-rc1-103-ge19875c88916 ***
Starting application thread!
RPMsg Service [master] demo started
Master core received a message: 1
Master core received a message: 3
Master core received a message: 5
...
Master core received a message: 99
RPMsg Service demo ended.
*** Booting Zephyr OS build v2.7.0-rc1-103-ge19875c88916 ***
Starting application thread!
RPMsg Service [remote] demo started
Remote core received a message: 0
Remote core received a message: 2
Remote core received a message: 4
...
Remote core received a message: 98
RPMsg Service demo ended.