OpenAMP
Overview
This application demonstrates how to use OpenAMP with Zephyr. It is designed to demonstrate how to integrate OpenAMP with Zephyr both from a build perspective and code. Note that the remote and primary core images can be flashed independently, but sysbuild must be used in order to build the images.
Building the application for lpcxpresso54114_m4
# From the root of the zephyr repository
west build -b lpcxpresso54114_m4 --sysbuild samples/subsys/ipc/openamp
west debug
Building the application for lpcxpresso55s69_cpu0
# From the root of the zephyr repository
west build -b lpcxpresso55s69_cpu0 --sysbuild samples/subsys/ipc/openamp
west debug
Building the application for mps2_an521
# From the root of the zephyr repository
west build -b mps2_an521 --sysbuild samples/subsys/ipc/openamp
west debug
Building the application for v2m_musca_b1
# From the root of the zephyr repository
west build -b v2m_musca_b1 --sysbuild samples/subsys/ipc/openamp
west debug
Building the application for mimxrt1170_evk_cm7
# From the root of the zephyr repository
west build -b mimxrt1170_evk_cm7 --sysbuild samples/subsys/ipc/openamp
west debug
Open a serial terminal (minicom, putty, etc.) and connect the board with the following settings:
Speed: 115200
Data: 8 bits
Parity: None
Stop bits: 1
Reset the board and the following message will appear on the corresponding serial port, one is master another is remote:
**** Booting Zephyr OS build zephyr-v1.14.0-2064-g888fc98fddaa ****
Starting application thread!
OpenAMP[master] demo started
Master core received a message: 1
Master core received a message: 3
Master core received a message: 5
...
Master core received a message: 99
OpenAMP demo ended.
**** Booting Zephyr OS build zephyr-v1.14.0-2064-g888fc98fddaa ****
Starting application thread!
OpenAMP[remote] demo started
Remote core received a message: 0
Remote core received a message: 2
Remote core received a message: 4
...
Remote core received a message: 98
OpenAMP demo ended.