st,stm32h7-rcc

Vendor: STMicroelectronics

Description

STM32 Reset and Clock controller node for STM32H7 devices
This node is in charge of system clock ('SYSCLK') source selection and
System Clock Generation.

Configuring STM32 Reset and Clock controller node:

System clock source should be selected amongst the clock nodes available in "clocks"
node (typically 'clk_hse, clk_csi', 'pll', ...).
As part of this node configuration, SYSCLK frequency should also be defined, using
"clock-frequency" property.
Last, bus clocks (typically HCLK, PCLK1, PCLK2) should be configured using matching
prescaler properties.
Here is an example of correctly configured rcc node:
&rcc {
         clocks = <&pll>;  /* Set pll as SYSCLK source */
         clock-frequency = <DT_FREQ_M(480)>; /* SYSCLK runs at 480MHz */
         d1cpre = <1>;
         hpre = <1>;
         d1ppre = <1>;
         d2ppre1 = <1>;
         d2ppre2 = <1>;
         d3ppre = <1>;
}

Confere st,stm32-rcc binding for information about domain clocks configuration.

Properties

Properties not inherited from the base binding file.

Name

Type

Details

#clock-cells

int

Number of items to expect in a Clock specifier

This property is required.

Constant value: 2

clock-frequency

int

default frequency in Hz for clock output

This property is required.

d1cpre

int

D1 Domain, CPU1 clock prescaler. Sets a HCLK frequency (feeding Cortex-M Systick)
lower than SYSCLK frequency (actual core frequency).
Zephyr doesn't make a difference today between these two clocks.
Changing this prescaler is not allowed until it is made possible to
use them independently in Zephyr clock subsystem.

This property is required.

Legal values: 1

hpre

int

D2 domain, CPU2 core clock and AHB(1/2/3/4) peripheral prescaler

This property is required.

Legal values: 1, 2, 4, 8, 16, 64, 128, 256, 512

d1ppre

int

D1 domain, APB3 peripheral prescaler

This property is required.

Legal values: 1, 2, 4, 8, 16

d2ppre1

int

D2 domain, APB1 peripheral prescaler

This property is required.

Legal values: 1, 2, 4, 8, 16

d2ppre2

int

D2 domain, APB2 peripheral prescaler

This property is required.

Legal values: 1, 2, 4, 8, 16

d3ppre

int

D3 domain, APB4 peripheral prescaler

This property is required.

Legal values: 1, 2, 4, 8, 16

Specifier cell names

  • clock cells: bus, bits