.. zephyr:code-sample:: lp3943 :name: LP3943 RGBW LED :relevant-api: led_interface Control up to 16 RGBW LEDs connected to an LP3943 driver chip. Overview ******** This sample controls 16 LEDs connected to an LP3943 driver, in a continuous pattern of turning them on one at a time (at a one second interval) until they're all on, and then turning them off in reverse order. Requirements ************ The :ref:`96b_neonkey` board has an LP3943 driver and 16 LEDs on board, so we'll use this board for our example. Building and Running ******************** Build the application for the :ref:`96b_neonkey` board, which has an LP3943 driver included. .. zephyr-app-commands:: :zephyr-app: samples/drivers/led_lp3943 :board: 96b_neonkey :goals: build :compact: For flashing the application, refer to the Flashing section of the :ref:`96b_neonkey` board documentation. When you connect to the board's serial console, you should see the following output in addition to the LED pattern: .. code-block:: none ***** BOOTING ZEPHYR OS v1.11.99 ***** [general] [INF] main: Found LED device LP3943 [general] [INF] main: Displaying the pattern References ********** - LP3943: http://www.ti.com/lit/ds/snvs256d/snvs256d.pdf