.. _g1120b0mipi: G1120B0MIPI MIPI Display ########################## Overview ******** The G1120B0MIPI is a 1.2 inch circular AMOLED display, 390x390 pixels, with a 1-lane MIPI interface. This display connects to the i.MX RT595 Evaluation Kit. More information about the shield can be found at the `G1120B0MIPI product page`_. This display uses a 40 pin FPC interface, which is available on many NXP EVKs. Pins Assignment of the G1120B0MIPI MIPI Display ========================================================== +-----------------------+------------------------+ | FPC Connector Pin | Function | +=======================+========================+ | 1 | LED backlight cathode | +-----------------------+------------------------+ | 21 | Controller reset | +-----------------------+------------------------+ | 22 | Controller LPTE | +-----------------------+------------------------+ | 26 | Touch ctrl I2C SDA | +-----------------------+------------------------+ | 27 | Touch ctrl I2C SCL | +-----------------------+------------------------+ | 28 | Touch ctrl reset | +-----------------------+------------------------+ | 29 | Touch ctrl interrupt | +-----------------------+------------------------+ | 32 | LCD power enable | +-----------------------+------------------------+ | 34 | Backlight power enable | +-----------------------+------------------------+ Requirements ************ This shield can only be used with a board which provides a configuration for the 40 pin FPC interface Programming *********** Set ``-DSHIELD=g1120b0mipi`` when you invoke ``west build``. For example: .. zephyr-app-commands:: :zephyr-app: samples/drivers/display :board: mimxrt595_evk/mimxrt595s/cm33 :shield: g1120b0mipi :goals: build References ********** .. target-notes:: .. _G1120B0MIPI product page: https://www.nxp.com/design/development-boards/i-mx-evaluation-and-development-boards/1-2-wearable-display-g1120b0mipi:G1120B0MIPI