TEMP HALY

group nrfy_temp

Hardware access layer with cache and barrier support for managing the Temperature sensor (TEMP).

Defines

NRFY_TEMP_HAS_CALIBRATION

See also

NRF_TEMP_HAS_CALIBRATION Symbol indicating whether the calibration of temperature measurement is present.

Functions

NRFY_STATIC_INLINE void nrfy_temp_int_init(NRF_TEMP_Type *p_reg, uint32_t mask, uint8_t irq_priority, bool enable)

Function for initializing the specified TEMP interrupts.

Parameters:

p_reg – [in] Pointer to the structure of registers of the peripheral.
mask – [in] Mask of interrupts to be initialized.
irq_priority – [in] Interrupt priority.
enable – [in] True if the interrupts are to be enabled, false otherwise.

NRFY_STATIC_INLINE void nrfy_temp_int_uninit(NRF_TEMP_Type *p_reg)

Function for uninitializing the TEMP interrupts.

Parameters:

p_reg – [in] Pointer to the structure of registers of the peripheral.

NRFY_STATIC_INLINE void nrfy_temp_int_enable(NRF_TEMP_Type *p_reg, uint32_t mask)

See also

nrf_temp_int_enable Function for enabling specified interrupts.

Parameters:

p_reg – [in] Pointer to the structure of registers of the peripheral.
mask – [in] Mask of interrupts to be enabled. Use nrf_temp_int_mask_t values for bit masking.

NRFY_STATIC_INLINE void nrfy_temp_int_disable(NRF_TEMP_Type *p_reg, uint32_t mask)

See also

nrf_temp_int_disable Function for disabling specified interrupts.

Parameters:

p_reg – [in] Pointer to the structure of registers of the peripheral.
mask – [in] Mask of interrupts to be disabled. Use nrf_temp_int_mask_t values for bit masking.

NRFY_STATIC_INLINE uint32_t nrfy_temp_int_enable_check(NRF_TEMP_Type const *p_reg, uint32_t mask)

See also

nrf_temp_int_enable_check Function for checking if the specified interrupts are enabled.

Parameters:

p_reg – [in] Pointer to the structure of registers of the peripheral.
mask – [in] Mask of interrupts to be checked. Use nrf_temp_int_mask_t values for bit masking.

Returns:

Mask of enabled interrupts.

NRFY_STATIC_INLINE uint32_t nrfy_temp_task_address_get(NRF_TEMP_Type const *p_reg, nrf_temp_task_t task)

See also

nrf_temp_task_address_get Function for getting the address of the specified TEMP task register.

Parameters:

p_reg – [in] Pointer to the structure of registers of the peripheral.
task – [in] Requested task.

Returns:

Address of the requested task register.

NRFY_STATIC_INLINE void nrfy_temp_task_trigger(NRF_TEMP_Type *p_reg, nrf_temp_task_t task)

See also

nrf_temp_task_trigger Function for activating the specified TEMP task.

Parameters:

p_reg – [in] Pointer to the structure of registers of the peripheral.
task – [in] Task to be activated.

NRFY_STATIC_INLINE uint32_t nrfy_temp_event_address_get(NRF_TEMP_Type const *p_reg, nrf_temp_event_t event)

See also

nrf_temp_event_address_get Function for getting the address of the specified TEMP event register.

Parameters:

p_reg – [in] Pointer to the structure of registers of the peripheral.
event – [in] Requested event.

Returns:

Address of the requested event register.

NRFY_STATIC_INLINE void nrfy_temp_event_clear(NRF_TEMP_Type *p_reg, nrf_temp_event_t event)

See also

nrf_temp_event_clear Function for clearing the specified TEMP event.

Parameters:

p_reg – [in] Pointer to the structure of registers of the peripheral.
event – [in] Event to clear.

NRFY_STATIC_INLINE bool nrfy_temp_event_check(NRF_TEMP_Type const *p_reg, nrf_temp_event_t event)

See also

nrf_temp_event_check Function for getting the state of a specific event.

Parameters:

p_reg – [in] Pointer to the structure of registers of the peripheral.
event – [in] Event to be checked.

Return values:

true – The event has been generated.
false – The event has not been generated.

NRFY_STATIC_INLINE int32_t nrfy_temp_result_get(NRF_TEMP_Type const *p_reg)

See also

nrf_temp_result_get Function for getting the result of temperature measurement.

Note

Returned value is in 2’s complement format, 0.25 °C steps

Parameters:

p_reg – [in] Pointer to the structure of registers of the peripheral.

Returns:

Temperature value register contents.

NRFY_STATIC_INLINE void nrfy_temp_calibration_coeff_set(NRF_TEMP_Type *p_reg, uint32_t coeff)

See also

nrf_temp_calibration_coeff_set Function for setting the calibration coefficient for the temperature measurement.

Parameters:

p_reg – [in] Pointer to the structure of registers of the peripheral.
coeff – [in] Calibration coefficient.

NRFY_STATIC_INLINE uint32_t nrfy_temp_calibration_coeff_get(NRF_TEMP_Type const *p_reg)

See also

nrf_temp_calibration_coeff_get Function for getting the calibration coefficient for the temperature measurement.

Parameters:

p_reg – [in] Pointer to the structure of registers of the peripheral.

Returns:

Calibration coefficient.

NRFY_STATIC_INLINE void nrfy_temp_subscribe_set(NRF_TEMP_Type *p_reg, nrf_temp_task_t task, uint8_t channel)

See also

nrf_temp_subscribe_set Function for setting the subscribe configuration for a given TEMP task.

Parameters:

p_reg – [in] Pointer to the structure of registers of the peripheral.
task – [in] Task for which to set the configuration.
channel – [in] Channel through which to subscribe events.

NRFY_STATIC_INLINE void nrfy_temp_subscribe_clear(NRF_TEMP_Type *p_reg, nrf_temp_task_t task)

See also

nrf_temp_subscribe_clear Function for clearing the subscribe configuration for a given TEMP task.

Parameters:

p_reg – [in] Pointer to the structure of registers of the peripheral.
task – [in] Task for which to clear the configuration.

NRFY_STATIC_INLINE void nrfy_temp_publish_set(NRF_TEMP_Type *p_reg, nrf_temp_event_t event, uint8_t channel)

See also

nrf_temp_publish_set Function for setting the publish configuration for a given TEMP event.

Parameters:

p_reg – [in] Pointer to the structure of registers of the peripheral.
event – [in] Event for which to set the configuration.
channel – [in] Channel through which to publish the event.

NRFY_STATIC_INLINE void nrfy_temp_publish_clear(NRF_TEMP_Type *p_reg, nrf_temp_event_t event)

See also

nrf_temp_publish_clear Function for clearing the publish configuration for a given TEMP event.

Parameters:

p_reg – [in] Pointer to the structure of registers of the peripheral.
event – [in] Event for which to clear the configuration.