AT monitor

The AT monitor library is used to define AT monitors, which consist of a handler function that receives AT notifications from the Modem library, based on a filter. The handler is executed from the system workqueue or from an ISR, depending on the type of monitor.

Overview

The Modem library AT interface supports only a single handler function that can receive AT notifications. The handler is executed in an interrupt service routine (ISR). It is likely that multiple parts of the application might require AT notifications, and that the processing of the notification is done outside an ISR.

The AT monitor library facilitates the integration of the Modem library in nRF Connect SDK applications in two ways:

  1. It handles the copying of notifications and reschedules their processing in a thread.

  2. It dispatches notifications to multiple parts of the application.

Note

When the AT monitor library is enabled, the application must not call nrf_modem_at_notif_handler_set() as that will override the handler set by the AT monitor library. The application must instead define an AT monitor with a filter set to ANY to achieve the same behavior of registering a handler for AT notifications with the Modem library.

Initialization

The AT monitor library initializes automatically when enabled using CONFIG_AT_MONITOR. Upon initialization, the AT monitor library registers itself as the receiver of AT notifications from the Modem library (using nrf_modem_at_notif_handler_set()).

Note

When the AT monitor library is initialized, it will override the handler set previously with the Modem library to receive the AT notifications.

Usage

The application can define an AT monitor to receive notifications through the AT_MONITOR and AT_MONITOR_ISR macros. An AT monitor has a name, a filter string, and a callback function. In addition, it can be paused or activated (using PAUSED and ACTIVE respectively). Multiple parts of the application can define their own AT monitor with the same filter as another AT monitor, and thus receive the same notifications, if desired.

Deferred dispatching

The application can define an AT monitor to receive AT notifications in the system workqueue using the AT_MONITOR macro. When the AT monitor library receives an AT notification from the Modem library, the notification is copied on the AT monitor library heap and is dispatched using the system workqueue to all monitors whose filter matches (even partially) the contents of the notification.

The following code snippet shows how to register a handler that receives +CEREG notifications from the Modem library:

/* AT monitor for +CEREG notifications */
AT_MONITOR(network_registration, "+CEREG", cereg_mon);

int cereg_mon(const char *notif)
{
        printf("Received +CEREG notification: %s", notif);
}

The size of the AT monitor library heap can be configured using the CONFIG_AT_MONITOR_HEAP_SIZE option.

Direct dispatching

The AT monitor library supports defining a particular type of monitor that receives the AT notifications in an interrupt service routine. Because notifications dispatched to AT monitors in an ISR are not copied onto the AT monitor library heap, the application is guaranteed that the library will not be out of memory to copy the notification. This can be useful for some particularly large AT notifications or AT notifications that the application must reply to, for example, SMS notifications.

The following code snippet shows how to register a handler that receives +CEREG notifications from the Modem library:

/* AT monitor for +CEREG notifications, dispatched in ISR */
AT_MONITOR_ISR(network_registration, "+CEREG", cereg_mon);

int cereg_mon(const char *notif)
{
        printf("Received +CEREG notification in ISR");
}

Pausing and resuming

When defined, an AT monitor is in active state by default. An AT monitor can be paused and resumed with the at_monitor_pause() and at_monitor_resume() functions respectively. If desired, an AT monitor can be defined to be in paused state at compile time by appending PAUSED to the monitor definition.

The following code snippet shows how to define an AT monitor for +CEREG notifications that is paused at boot and resumed later:

/* AT monitor for +CEREG notifications, paused until manually activated */
AT_MONITOR(network_registration, "+CEREG", cereg_mon, PAUSED);

void foo(void)
{
        /* let's resume the monitor */
        at_monitor_resume(&network_registration);
}

Wildcard filter

It is possible to define an AT monitor that will receive all AT notifications, by passing ANY as the AT monitor filter string.

The following code snippet shows how to define an AT monitor that will receive all AT notifications:

/* AT monitor for all notifications */
AT_MONITOR(catch_all, ANY, at_notif_handler);

int at_notif_handler(const char *notif)
{
        printf("Received a notification: %s", notif);
}

API documentation

Header file: include/modem/at_monitor.h
Source file: lib/at_monitor/at_monitor.c
group at_monitor

Public APIs for the AT monitor library.

Defines

ANY

Wildcard. Match any notifications.

PAUSED

Monitor is paused.

ACTIVE

Monitor is active, default

AT_MONITOR(name, _filter, _handler, ...)

Define an AT monitor to receive notifications in the system workqueue thread.

Parameters:
  • name – The monitor name.

  • _filter – The filter for AT notification the monitor should receive, or ANY to receive all notifications.

  • _handler – The monitor callback.

  • ... – Optional monitor initial state (PAUSED or ACTIVE). The default initial state of a monitor is active.

AT_MONITOR_ISR(name, _filter, _handler, ...)

Define an AT monitor to receive AT notifications in an ISR.

Parameters:
  • name – The monitor name.

  • _filter – The filter for AT notification the monitor should receive, or ANY to receive all notifications.

  • _handler – The monitor callback.

  • ... – Optional monitor initial state (PAUSED or ACTIVE). The default initial state of a monitor is active.

Typedefs

typedef void (*at_monitor_handler_t)(const char *notif)

AT monitor callback.

Param notif:

The AT notification.

Functions

static inline void at_monitor_pause(struct at_monitor_entry *mon)

Pause monitor.

Pause monitor mon from receiving notifications.

Parameters:
  • mon – The monitor to pause.

static inline void at_monitor_resume(struct at_monitor_entry *mon)

Resume monitor.

Resume forwarding notifications to monitor mon.

Parameters:
  • mon – The monitor to resume.

struct at_monitor_entry
#include <at_monitor.h>

AT monitor entry.

Public Members

const char *filter

The filter for this monitor.

const at_monitor_handler_t handler

Monitor callback.